Search   
MSDS 
:
 Tannic Acid, 95%
CAS 
:
 1401-55-4
SYNONYMS 
:
 Gallotannin; Glycerite; Gallotannic acid
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1401-55-4 |Tannic Acid | 95 | 215-753-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Light sensitive.Air sensitive.

Potential Health Effects
Eye:
May cause eye irritation. May result in corneal injury.
Skin:
May cause skin irritation. May be absorbed through the skin in
harmful amounts.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May cause liver damage.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Chronic ingestion may cause liver damage. Prolonged or repeated eye
contact may cause conjunctivitis.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid if irritation develops or persists. Flush skin with
plenty of soap and water.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid if irritation or symptoms occur.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use water spray,
dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Minimize dust generation and accumulation. Keep
container tightly closed. Avoid contact with clothing and other
combustible materials. Avoid ingestion and inhalation. Use only in a
chemical fume hood. Store and handle protected from air.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Keep containers tightly closed. Store protected from
light and air.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1401-55-4:

Russia: 1 mg/m3 TWA

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: yellow-brown
Odor: faint odor
pH: Weak acid in water.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Decomposes
Autoignition Temperature: 980 deg F ( 526.67 deg C)
Flash Point: 390 deg F ( 198.89 deg C)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 218 deg C
Solubility in water: Completely soluble in water
Specific Gravity/Density: Not available.
Molecular Formula: C76H52O46
Molecular Weight: 1700.3364

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Light, dust generation, exposure to air, temperatures above 200C.
Incompatibilities with Other Materials:
Strong oxidizing agents; strong bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, acrid smoke and fumes.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1401-55-4: FM3015000 PY7955000 UZ3400000 WU7185000
WW5075000
LD50/LC50:
CAS# 1401-55-4: Oral, rabbit: LD50 = 5 gm/kg; Oral, rat: LD50 = 2260
mg/kg.
Carcinogenicity:
Tannic Acid -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Mosquito Fish: LC50 = 37 mg/L; 96 Hr.; Unspecified

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 1401-55-4: 1
Canada
CAS# 1401-55-4 is listed on Canada's DSL List.
CAS# 1401-55-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1401-55-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/24/1999 Revision #5 Date: 5/13/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Sodium Methoxide Titrant (0.5 M in Methanol) 67-56-1
Octanoic Acid, 99% 124-07-2
Sodium Nitrite, p.a. 7632-00-0
Sodium Nitrite, 99%, contains an anticakin reagent 7632-00-0
Sodium oxalate, pure 62-76-0
Sodium periodate, 99% 100g 7790-28-5
Sodium phosphate, dibasic heptahydrate, p.a. 7558-79-4
Dichloromethane-D2, 99.6+ Atom % D 1665-00-5
2,4-Hexanedione, 99 % (GC) 3002-24-2
Dichloromethane-D2, 99.6+ Atom % D, Packaged in 1.00ml Ampules 1665-00-5
Dichloromethane-D2, 100% D, Packaged in 0.5ml Ampules 1665-00-5
Salicylic Acid,Sodium Salt, 99% 54-21-7
Sodium Sulfate, Anhydrous, 99% 7757-82-6
Sodium Sulfate Crystalline, Anhydrous P.A. 7757-82-6
Sodium Sulfate, Anhydrous, Reagent ACS (Granular) 7757-82-6
Sodium Sulfite, Anhydrous, Reagent ACS (Crystals), 98+% (Titr.) 7757-83-7
Sodium Thiocyanate 98%(Titr., Dry) 540-72-7
Sodium Thiosulfate, 0.1N Standard Solution 7732-18-5
Sodium Thiosulfate, Pentahydrate 10102-17-7
Sodium Thiosulfate, Pentahydrate, Reagent ACS (Crystals) 10102-17-7
Sodium tungstate dihydrate, p.a. 10213-10-2
N-(4-Bromobutyl)-Phthalimide, 98% 5394-18-3
Tin(IV) chloride, anhydrous, 99% 7646-78-8
Tin (II) Oxide, 99+%, -100 Mesh 21651-19-4
Starch, Potato, Hydrolyzed for Electro-phoresis 9005-25-8
1-Dodecanesulfonic Acid Sodium Salt, 99+% 2386-53-0
Starch, Potato (Powder) 9005-25-8
Ethyl Propionate, 99+% (gc) 105-37-3
Poly(4-methyl-1-pentene), low molecular weight 25068-26-2
Cholic acid, 97%(tlc) 81-25-4
Styrene, 99%, Stabilized with 10-15 ppm p-Tert. -Butylcatechol 100-42-5
D(+)-sucrose, biochemical grade 57-50-1
Sucrose, RNase Free and DNAse Free 57-50-1
Sucrose, U.S.P./N.F. 57-50-1
Sucrose, Reagent ACS 57-50-1
Sulfamic Acid, p.a. 5329-14-6
Sulfanilic Acid, 99% 121-57-3
Sulfanilic Acid, Reagent ACS 121-57-3
Triethyl Orthoacetate, 97% 78-39-7
5-Sulfosalicylic acid dihydrate, 98% 5965-83-3
Sulfur, 99.999%, ca.12mm Pieces 7704-34-9
Sulfur, Sublimed, 99.5% 7704-34-9
Sulfuric Acid, P.A. 7664-93-9
Sulfuric Acid, Reagent ACS 7664-93-9
Tannic Acid, 95% 1401-55-4
L-(+)-Tartaric Acid , 99+% 87-69-4
Sodium Sulfide Nonahydrate, P.A. 1313-84-4
Tert.- Amyl Alcohol (2-Methyl-2-Butanol), 99% 75-85-4
Diethoxymethane, 99% 462-95-3
Tetrachloroethylene, 99% 127-18-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net