**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7790-28-5 |SODIUM PERIODATE | 99 | 232-197-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI O
Risk Phrases: 36/37/38 8
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin. Contact with
combustible material may cause fire.Hygroscopic (absorbs moisture
from the air).
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
Causes respiratory tract irritation.
Chronic:
Prolonged or repeated skin contact may cause dermatitis.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Strong oxidizer. Contact with other material may
cause fire.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use water only!
Cool containers with flooding quantities of water until well after
fire is out. Do NOT use dry chemicals, CO2, Halon or foams.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Empty containers retain product residue, (liquid
and/or vapor), and can be dangerous. Keep container tightly closed.
Avoid ingestion and inhalation. Keep from contact with clothing and
other combustible materials. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Do not store near combustible materials. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 7790-28-5:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Always use
a NIOSH or European Standard EN 149 approved
respirator when necessary.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: white to off-white
Odor: Odorless
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 300 deg C
Autoignition Temperature: Not available.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 300 deg C
Solubility in water: Soluble.
Specific Gravity/Density:
Molecular Formula: INaO4
Molecular Weight: 213.89
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable.
Conditions to Avoid:
Incompatible materials, combustible materials, exposure to moist air
or water.
Incompatibilities with Other Materials:
Organic materials - reducing agents - acids - finely powdered metals
- magnesium - ammonium perchlorate - finely divided aluminium or
magnesium hydrides.
Hazardous Decomposition Products:
Hydrogen iodide, sodium oxide, iodine.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 7790-28-5: SD4550000
LD50/LC50:
Not available.
Not available.
Carcinogenicity:
SODIUM PERIODATE -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: OXIDIZING SOLID, N.O.S.*
Hazard Class: 5.1
UN Number: 1479
Packing Group: II
IMO
Shipping Name: OXIDIZING SOLID, N.O.S.
Hazard Class: 5.1
UN Number: 1479
Packing Group: II
RID/ADR
Shipping Name: OXIDIZING SOLID, N.O.S.
Hazard Class: 5.1
UN Number: 1479
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI O
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
R 8 Contact with combustible material may cause
fire.
Safety Phrases:
S 17 Keep away from combustible material.
WGK (Water Danger/Protection)
CAS# 7790-28-5: 1
Canada
CAS# 7790-28-5 is listed on Canada's DSL List.
CAS# 7790-28-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7790-28-5 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 7/10/1998 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Sodium Methoxide Titrant (0.5 M in Methanol)
| 67-56-1 |
|
Octanoic Acid, 99%
| 124-07-2 |
|
Sodium Nitrite, p.a.
| 7632-00-0 |
|
Sodium Nitrite, 99%, contains an anticakin reagent
| 7632-00-0 |
|
Sodium oxalate, pure
| 62-76-0 |
|
Sodium periodate, 99% 100g
| 7790-28-5 |
|
Sodium phosphate, dibasic heptahydrate, p.a.
| 7558-79-4 |
|
Dichloromethane-D2, 99.6+ Atom % D
| 1665-00-5 |
|
2,4-Hexanedione, 99 % (GC)
| 3002-24-2 |
|
Dichloromethane-D2, 99.6+ Atom % D, Packaged in 1.00ml Ampules
| 1665-00-5 |
|
Dichloromethane-D2, 100% D, Packaged in 0.5ml Ampules
| 1665-00-5 |
|
Salicylic Acid,Sodium Salt, 99%
| 54-21-7 |
|
Sodium Sulfate, Anhydrous, 99%
| 7757-82-6 |
|
Sodium Sulfate Crystalline, Anhydrous P.A.
| 7757-82-6 |
|
Sodium Sulfate, Anhydrous, Reagent ACS (Granular)
| 7757-82-6 |
|
Sodium Sulfite, Anhydrous, Reagent ACS (Crystals), 98+% (Titr.)
| 7757-83-7 |
|
Sodium Thiocyanate 98%(Titr., Dry)
| 540-72-7 |
|
Sodium Thiosulfate, 0.1N Standard Solution
| 7732-18-5 |
|
Sodium Thiosulfate, Pentahydrate
| 10102-17-7 |
|
Sodium Thiosulfate, Pentahydrate, Reagent ACS (Crystals)
| 10102-17-7 |
|
Sodium tungstate dihydrate, p.a.
| 10213-10-2 |
|
N-(4-Bromobutyl)-Phthalimide, 98%
| 5394-18-3 |
|
Tin(IV) chloride, anhydrous, 99%
| 7646-78-8 |
|
Tin (II) Oxide, 99+%, -100 Mesh
| 21651-19-4 |
|
Starch, Potato, Hydrolyzed for Electro-phoresis
| 9005-25-8 |
|
1-Dodecanesulfonic Acid Sodium Salt, 99+%
| 2386-53-0 |
|
Starch, Potato (Powder)
| 9005-25-8 |
|
Ethyl Propionate, 99+% (gc)
| 105-37-3 |
|
Poly(4-methyl-1-pentene), low molecular weight
| 25068-26-2 |
|
Cholic acid, 97%(tlc)
| 81-25-4 |
|
Styrene, 99%, Stabilized with 10-15 ppm p-Tert. -Butylcatechol
| 100-42-5 |
|
D(+)-sucrose, biochemical grade
| 57-50-1 |
|
Sucrose, RNase Free and DNAse Free
| 57-50-1 |
|
Sucrose, U.S.P./N.F.
| 57-50-1 |
|
Sucrose, Reagent ACS
| 57-50-1 |
|
Sulfamic Acid, p.a.
| 5329-14-6 |
|
Sulfanilic Acid, 99%
| 121-57-3 |
|
Sulfanilic Acid, Reagent ACS
| 121-57-3 |
|
Triethyl Orthoacetate, 97%
| 78-39-7 |
|
5-Sulfosalicylic acid dihydrate, 98%
| 5965-83-3 |
|
Sulfur, 99.999%, ca.12mm Pieces
| 7704-34-9 |
|
Sulfur, Sublimed, 99.5%
| 7704-34-9 |
|
Sulfuric Acid, P.A.
| 7664-93-9 |
|
Sulfuric Acid, Reagent ACS
| 7664-93-9 |
|
Tannic Acid, 95%
| 1401-55-4 |
|
L-(+)-Tartaric Acid , 99+%
| 87-69-4 |
|
Sodium Sulfide Nonahydrate, P.A.
| 1313-84-4 |
|
Tert.- Amyl Alcohol (2-Methyl-2-Butanol), 99%
| 75-85-4 |
|
Diethoxymethane, 99%
| 462-95-3 |
|
Tetrachloroethylene, 99%
| 127-18-4 |
|
|