Search   
MSDS 
:
 2,3-Dimethylfuran, 99%
CAS 
:
 14920-89-9
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 14920-89-9 |2,3-Dimethylfuran | 99% | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN F
Risk Phrases: 11 20/21/22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Harmful by inhalation, in contact with skin and if
swallowed.The toxicological properties of this material have not been
fully investigated.Highly flammable.

Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause skin irritation. Harmful if absorbed through the skin. May
cause cyanosis of the extremities.
Ingestion:
Harmful if swallowed. May cause irritation of the digestive tract.
The toxicological properties of this substance have not been fully
investigated. Ingestion of large amounts may cause CNS depression.
Inhalation:
Harmful if inhaled. May cause respiratory tract irritation. The
toxicological properties of this substance have not been fully
investigated. Aspiration may lead to pulmonary edema. Vapors may
cause dizziness or suffocation. May cause burning sensation in the
chest.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Water
may be ineffective. Material is lighter than water and a fire may be
spread by the use of water. Vapors may be heavier than air. They
can spread along the ground and collect in low or confined areas.
Will be easily ignited by heat, sparks or flame. Containers may
explode if exposed to fire. Runoff from fire control or dilution
water may cause pollution.
Extinguishing Media:
Water may be ineffective. Water may spread fire. If water is the
only media available, use in flooding amounts. Use alcohol foam. Use
dry chemical. Do NOT use straight streams of water. Cool containers
with flooding quantities of water until well after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid breathing
dust, vapor, mist, or gas. Avoid contact with eyes, skin, and
clothing. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep container tightly closed. Keep
away from heat, sparks and flame. Avoid ingestion and inhalation. Do
not pressurize, cut, weld, braze, solder, drill, grind, or expose
empty containers to heat, sparks or open flames.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container. Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 14920-89-9:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: colorless to light yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 42 deg C @ 115.00mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: -1 deg C ( 30.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .9100g/cm3
Molecular Formula: C6H8O
Molecular Weight: 96.12

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not currently available.
Conditions to Avoid:
Ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 14920-89-9 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2,3-Dimethylfuran -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing Group: II
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing Group: II
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN F
Risk Phrases:
R 11 Highly flammable.
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 33 Take precautionary measures against static
discharges.
S 36/37 Wear suitable protective clothing and
gloves.
WGK (Water Danger/Protection)
CAS# 14920-89-9: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 14920-89-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 14920-89-9 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 10/26/1998 Revision #4 Date: 4/21/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1,2-Dichloroethane, extra dry, water <50 ppm 107-06-2
1-Pyrrolidinecarbodithioic acid, ammonium salt 5108-96-3
Cyclohexane, Extra Dry, Water <50 ppm 110-82-7
1,2-Cyclohexanedione, 98% 765-87-7
Dichloromethane, Extra Dry, Water <30 ppm 75-09-2
Ether, extra dry, water <50 ppm 60-29-7
Dimethylformamide, extra dry, water <30 ppm 68-12-2
Methyl sulfoxide, extra dry, water <50 ppm 67-68-5
1,4-Dioxane, extra dry, water <50 ppm 123-91-1
4-Acetamidophenol, 98% 103-90-2
Acetyl chloride 75-36-5
Ethyl Acetate, Extra Dry, Water <50 ppm 141-78-6
Rhodium(III) Chloride Trihydrate 38% Rh 20765-98-4
Ammonium Sulfate, Reagent ACS (crystals) 7783-20-2
n-Heptane, extra dry, water <30 ppm 108-87-2
n-Hexane, extra dry, water <20 ppm 110-54-3
N-Methylpyrrolidinone, extra dry, water <50 ppm 872-50-4
Ammonium thiocyanate, reagent acs (crystals) 1762-95-4
2,2,4-Trimethylpentane, extra dry, water <30 ppm 540-84-1
Methyl alcohol, extra dry, water <50 ppm 67-56-1
Disperse Orange 1 2581-69-3
Isopropanol, Extra Dry, Water <50 ppm 67-63-0
Ammonium metavanadate, p.a. 7803-55-6
Tetrahydrofuran, Extra Dry, Water <50 ppm 109-99-9
Aniline, P.A. 62-53-3
Toluene, Extra Dry, Water <10 ppm 108-88-3
Antimony, p.a., powder, 0.15 mm 7440-36-0
Benzyltriphenylphosphonium Tetrafluoroborate, 97% 31240-52-5
n-Butyrophenone, 99% 495-40-9
Potassium antimonyl-tartrate hemihydrate 99+% 28300-74-5
2,3-Dimethylfuran, 99% 14920-89-9
Tween 85 9055-70-3
Antimony trichloride, reagent ACS, crystals, 99+% 10025-91-9
Tween 40 9005-66-7
Antimony(III) Oxide, 99+% 1309-64-4
2-Amino-3,5-Dibromobenzaldehyde, 97% 50910-55-9
Piperonyl Butoxide, Tech., 90% 51-03-6
Arsenic (III) Oxide, P.A. 1327-53-3
4'-Bromo-3-Chloropropiophenone, 99% 31736-73-9
l(+)-Aspartic acid, 98+% 56-84-8
Meldola's Blue 7057-57-0
d-(+)-Isoascorbic acid,sodium salt, 98% 6381-77-7
Auramine O (Cert) 2465-27-2
4-Bromomethyl-3-Nitrobenzoic Acid 55715-03-2
Barbituric Acid, 99+% 67-52-7
3-(Trifluoromethoxy)Cinnamic Acid 0-01-1
(S)-(+)-Nalpha-Benzyl-N??-BOC-L-Hydrazinovaline 0-01-1
1,2-Epoxy-9-Decene, 96% 85721-25-1
Barium Acetate, Reagent ACS (Granular) 543-80-6
trans-1,4-Dichloro-2-butene, 95% 110-57-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net