Search   
MSDS 
:
 Erythrosin b (cert)
CAS 
:
 16423-68-0
SYNONYMS 
:
 Acid Red 51, C.I. 45430; Food Red 14; Aizen Erythrosine; D & C Red     No. 3; Tetraiodofluorescein Sodium Salt; Calcoid Erythrosine N; C.I.     773; C.I. Acid Red 51
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 16423-68-0 |Erythrosin B, high purity biological s| 100 | 240-474-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed.

Potential Health Effects
Eye:
Dust may cause mechanical irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause digestive tract disturbances. May be harmful if swallowed.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Avoid ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep
containers tightly closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 16423-68-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: maroon
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C20H6I4Na2O5
Molecular Weight: 879.85

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen iodide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 16423-68-0: LM5950000
LD50/LC50:
CAS# 16423-68-0: Oral, mouse: LD50 = 1264 mg/kg; Oral, rat: LD50 =
1840 mg/kg.
Carcinogenicity:
Erythrosin B, high purity biological stain -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 36 Wear suitable protective clothing.
WGK (Water Danger/Protection)
CAS# 16423-68-0: 1
Canada
CAS# 16423-68-0 is listed on Canada's DSL List.
CAS# 16423-68-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 16423-68-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/01/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3-Bromophenol, 99% (GC) 591-20-8
Furylacrylic acid, 99% 539-47-9
Cholesteryl Chloride, 98% 910-31-6
n-Tridecylamine, 98% 2869-34-3
1,2-Naphthoquinone-4-sulfonic acid sodium salt, 99% 521-24-4
Erythrosin b (cert) 16423-68-0
4'-(Trifluoromethyl)Acetophenone, 99% 709-63-7
Fumaryl Chloride, 95% 627-63-4
Thymol blue sodium salt, reagent acs 62625-21-2
Valeraldehyde, 98% 110-62-3
4-Heptylbenzoic acid, 99% 38350-87-7
3-(2-Iodoacetamido)-PROXYL, free radical 27048-01-7
2-Chloropropionic acid 598-78-7
7-Oxabicyclo(2.2.1)Heptane (1,4-Epoxy-Cyclohexane), 99% 279-49-2
1,1,1,3,3,3-Hexamethyldisilazane, 98% 999-97-3
L-(-)-Alpha-Bromocamphor-Pi-Sulfonic Acid Ammonium Salt 99% 55870-50-3
8-Hydroxyquinoline 148-24-3
Poly(vinyl ethyl ether), low molecular weight 25104-37-4
4,8-Dihydroxyquinoline-2-carboxylic acid, 96% 59-00-7
N-Carbobenzyloxy-L-phenylalanine, 99+% 1161-13-3
2-Thiophenemethylamine, 90-96% (GC) 27757-85-3
Brij 99 (Contains 0.01% BHA and 0.005% Citric Acid added as 9004-98-2
Neodymium(III) oxide, 99.9% 1313-97-9
2-Chlorooctane (pract), 99% (gc) 628-61-5
Nitrosulfonazo III, Indicator Grade 1964-89-2
Dimethyl itaconate, 97% 617-52-7
3-Chlorophenyl isocyanate 2909-38-8
5-(3-Hydroxyphenyl)-5-phenylhydantoin 99+% 30074-03-4
2-Chlorobenzyl cyanide, 97% 2856-63-5
3-Hydroxy-2-methyl-4-pyrone 99% 118-71-8
2,6-Diamino-8-Durinol Hemisulfate Monohydrate 123333-49-3
2'-Hydroxyacetophenone, 99% 118-93-4
Lutetium atomic absorption standard solution, 1 mg/ml Lu in 0.5N HNO3 7439-94-3
Bis(2-ethoxyethyl) adipate, 97% (GC) 109-44-4
1,3-Dibromo-5-Fluoro-2-Iodobenzene, 99+% 62720-29-0
2-Cyanoacetamide, 99% 107-91-5
Molecular Sieves, 4A, 1-2 mm (10 to 18 Mesh) 0-00-1
Barium Cyclohexanebutyrate, 99%, ex Barium 62669-65-2
4-(N-Ethyl-N-2-methanesulfonylaminoethyl)-2-methylphenylenediamine 25646-71-3
Sodium Nitroprusside Dihydrate 13755-38-9
4-(4-Chlorobenzyl)-Pyridine, 98% 4409-11-4
N-(3'-Aminopropyl)-2-Pyrrolidinone, 95% (GC) 7663-77-6
11-Bromo-1-undecanol, 97% 1611-56-9
Heneicosanoic acid, 99%(gc) 2363-71-5
(-)-2-Azabicyclo[2.2.1]hept-5-en-3-one, 98%, >95% e.e. 79200-56-9
Coumarin 314, Laser Grade, 99% (UV-Vis) 55804-66-5
(+)-p-(2-Methylbutyl)benzoyl chloride, 98% 62796-32-1
S-Benzylthioglycolic Acid, 97% 103-46-8
N-Carbobenzyloxy-L-Leucine, 95% 2018-66-8
Isopropyl Methanesulfonate 926-06-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net