**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 926-06-7 |Isopropyl Methane Sulphonate | ca 100 | 213-132-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34 40
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns. Limited evidence of a carcinogenic effect.Corrosive.
Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Aspiration may lead
to pulmonary edema. May cause systemic effects.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Call a poison control center. If swallowed, do not induce vomiting
unless directed to do so by medical personnel. Never give anything by
mouth to an unconscious person. Get medical aid.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Vapors may be heavier
than air. They can spread along the ground and collect in low or
confined areas. Containers may explode when heated.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Cool containers with
flooding quantities of water until well after fire is out.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Keep
container tightly closed. Avoid ingestion and inhalation. Use with
adequate ventilation. Discard contaminated shoes.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
Corrosives area. Keep refrigerated. (Store below 4C/39F.)
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 926-06-7:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 82 deg C @ 6.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 104 deg C ( 219.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C4H10O3S
Molecular Weight: 138.19
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 926-06-7: PB2275000
LD50/LC50:
Not available.
Carcinogenicity:
Isopropyl Methane Sulphonate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3261
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
R 40 Limited evidence of a carcinogenic effect.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 926-06-7: No information available.
Canada
CAS# 926-06-7 is listed on Canada's NDSL List.
CAS# 926-06-7 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 926-06-7 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 7/12/1999 Revision #2 Date: 12/03/2002
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
3-Bromophenol, 99% (GC)
| 591-20-8 |
|
Furylacrylic acid, 99%
| 539-47-9 |
|
Cholesteryl Chloride, 98%
| 910-31-6 |
|
n-Tridecylamine, 98%
| 2869-34-3 |
|
1,2-Naphthoquinone-4-sulfonic acid sodium salt, 99%
| 521-24-4 |
|
Erythrosin b (cert)
| 16423-68-0 |
|
4'-(Trifluoromethyl)Acetophenone, 99%
| 709-63-7 |
|
Fumaryl Chloride, 95%
| 627-63-4 |
|
Thymol blue sodium salt, reagent acs
| 62625-21-2 |
|
Valeraldehyde, 98%
| 110-62-3 |
|
4-Heptylbenzoic acid, 99%
| 38350-87-7 |
|
3-(2-Iodoacetamido)-PROXYL, free radical
| 27048-01-7 |
|
2-Chloropropionic acid
| 598-78-7 |
|
7-Oxabicyclo(2.2.1)Heptane (1,4-Epoxy-Cyclohexane), 99%
| 279-49-2 |
|
1,1,1,3,3,3-Hexamethyldisilazane, 98%
| 999-97-3 |
|
L-(-)-Alpha-Bromocamphor-Pi-Sulfonic Acid Ammonium Salt 99%
| 55870-50-3 |
|
8-Hydroxyquinoline
| 148-24-3 |
|
Poly(vinyl ethyl ether), low molecular weight
| 25104-37-4 |
|
4,8-Dihydroxyquinoline-2-carboxylic acid, 96%
| 59-00-7 |
|
N-Carbobenzyloxy-L-phenylalanine, 99+%
| 1161-13-3 |
|
2-Thiophenemethylamine, 90-96% (GC)
| 27757-85-3 |
|
Brij 99 (Contains 0.01% BHA and 0.005% Citric Acid added as
| 9004-98-2 |
|
Neodymium(III) oxide, 99.9%
| 1313-97-9 |
|
2-Chlorooctane (pract), 99% (gc)
| 628-61-5 |
|
Nitrosulfonazo III, Indicator Grade
| 1964-89-2 |
|
Dimethyl itaconate, 97%
| 617-52-7 |
|
3-Chlorophenyl isocyanate
| 2909-38-8 |
|
5-(3-Hydroxyphenyl)-5-phenylhydantoin 99+%
| 30074-03-4 |
|
2-Chlorobenzyl cyanide, 97%
| 2856-63-5 |
|
3-Hydroxy-2-methyl-4-pyrone 99%
| 118-71-8 |
|
2,6-Diamino-8-Durinol Hemisulfate Monohydrate
| 123333-49-3 |
|
2'-Hydroxyacetophenone, 99%
| 118-93-4 |
|
Lutetium atomic absorption standard solution, 1 mg/ml Lu in 0.5N HNO3
| 7439-94-3 |
|
Bis(2-ethoxyethyl) adipate, 97% (GC)
| 109-44-4 |
|
1,3-Dibromo-5-Fluoro-2-Iodobenzene, 99+%
| 62720-29-0 |
|
2-Cyanoacetamide, 99%
| 107-91-5 |
|
Molecular Sieves, 4A, 1-2 mm (10 to 18 Mesh)
| 0-00-1 |
|
Barium Cyclohexanebutyrate, 99%, ex Barium
| 62669-65-2 |
|
4-(N-Ethyl-N-2-methanesulfonylaminoethyl)-2-methylphenylenediamine
| 25646-71-3 |
|
Sodium Nitroprusside Dihydrate
| 13755-38-9 |
|
4-(4-Chlorobenzyl)-Pyridine, 98%
| 4409-11-4 |
|
N-(3'-Aminopropyl)-2-Pyrrolidinone, 95% (GC)
| 7663-77-6 |
|
11-Bromo-1-undecanol, 97%
| 1611-56-9 |
|
Heneicosanoic acid, 99%(gc)
| 2363-71-5 |
|
(-)-2-Azabicyclo[2.2.1]hept-5-en-3-one, 98%, >95% e.e.
| 79200-56-9 |
|
Coumarin 314, Laser Grade, 99% (UV-Vis)
| 55804-66-5 |
|
(+)-p-(2-Methylbutyl)benzoyl chloride, 98%
| 62796-32-1 |
|
S-Benzylthioglycolic Acid, 97%
| 103-46-8 |
|
N-Carbobenzyloxy-L-Leucine, 95%
| 2018-66-8 |
|
Isopropyl Methanesulfonate
| 926-06-7 |
|
|