Search   
MSDS 
:
 Brij 99 (Contains 0.01% BHA and 0.005% Citric Acid added as
CAS 
:
 9004-98-2
SYNONYMS 
:
 Polyoxyethylene(20) Oleyl Ether
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 9004-98-2 |BRIJ | 99 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. Expected to be a low ingestion hazard.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam. Use
agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 9004-98-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: cream
Odor: Not available.
pH: Not available.
Vapor Pressure: < 1 mm Hg @ 20 deg
Viscosity: Not available.
Boiling Point: > 100 deg C @ 760.00mm Hg
Freezing/Melting Point: 30 - 33 deg C
Autoignition Temperature: Not available.
Flash Point: > 149 deg C (> 300.20 deg F)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: soluble
Specific Gravity/Density:
Molecular Formula: C58H116O21
Molecular Weight: 1149.54

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stability unknown.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 9004-98-2: RK2775000 RK2800000 RK2975000 RK3150000
TR1585000
LD50/LC50:
CAS# 9004-98-2: Draize test, rabbit, eye: 100 mg; Draize test,
rabbit, eye: 5 mg/48H; Draize test, rabbit, eye: 100 uL Moderate;
Draize test, rabbit, skin: 500 mg/24H Moderate; Oral, rat: LD50 =
25800 mg/kg; Oral, rat: LD50 = 2700 mg/kg; Oral, rat: LD50 = 2770
mg/kg; Oral, rat: LD50 = 70 gm/kg.
Carcinogenicity:
BRIJ -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 9004-98-2: 2
Canada
CAS# 9004-98-2 is listed on Canada's DSL List.
CAS# 9004-98-2 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 9004-98-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/29/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3-Bromophenol, 99% (GC) 591-20-8
Furylacrylic acid, 99% 539-47-9
Cholesteryl Chloride, 98% 910-31-6
n-Tridecylamine, 98% 2869-34-3
1,2-Naphthoquinone-4-sulfonic acid sodium salt, 99% 521-24-4
Erythrosin b (cert) 16423-68-0
4'-(Trifluoromethyl)Acetophenone, 99% 709-63-7
Fumaryl Chloride, 95% 627-63-4
Thymol blue sodium salt, reagent acs 62625-21-2
Valeraldehyde, 98% 110-62-3
4-Heptylbenzoic acid, 99% 38350-87-7
3-(2-Iodoacetamido)-PROXYL, free radical 27048-01-7
2-Chloropropionic acid 598-78-7
7-Oxabicyclo(2.2.1)Heptane (1,4-Epoxy-Cyclohexane), 99% 279-49-2
1,1,1,3,3,3-Hexamethyldisilazane, 98% 999-97-3
L-(-)-Alpha-Bromocamphor-Pi-Sulfonic Acid Ammonium Salt 99% 55870-50-3
8-Hydroxyquinoline 148-24-3
Poly(vinyl ethyl ether), low molecular weight 25104-37-4
4,8-Dihydroxyquinoline-2-carboxylic acid, 96% 59-00-7
N-Carbobenzyloxy-L-phenylalanine, 99+% 1161-13-3
2-Thiophenemethylamine, 90-96% (GC) 27757-85-3
Brij 99 (Contains 0.01% BHA and 0.005% Citric Acid added as 9004-98-2
Neodymium(III) oxide, 99.9% 1313-97-9
2-Chlorooctane (pract), 99% (gc) 628-61-5
Nitrosulfonazo III, Indicator Grade 1964-89-2
Dimethyl itaconate, 97% 617-52-7
3-Chlorophenyl isocyanate 2909-38-8
5-(3-Hydroxyphenyl)-5-phenylhydantoin 99+% 30074-03-4
2-Chlorobenzyl cyanide, 97% 2856-63-5
3-Hydroxy-2-methyl-4-pyrone 99% 118-71-8
2,6-Diamino-8-Durinol Hemisulfate Monohydrate 123333-49-3
2'-Hydroxyacetophenone, 99% 118-93-4
Lutetium atomic absorption standard solution, 1 mg/ml Lu in 0.5N HNO3 7439-94-3
Bis(2-ethoxyethyl) adipate, 97% (GC) 109-44-4
1,3-Dibromo-5-Fluoro-2-Iodobenzene, 99+% 62720-29-0
2-Cyanoacetamide, 99% 107-91-5
Molecular Sieves, 4A, 1-2 mm (10 to 18 Mesh) 0-00-1
Barium Cyclohexanebutyrate, 99%, ex Barium 62669-65-2
4-(N-Ethyl-N-2-methanesulfonylaminoethyl)-2-methylphenylenediamine 25646-71-3
Sodium Nitroprusside Dihydrate 13755-38-9
4-(4-Chlorobenzyl)-Pyridine, 98% 4409-11-4
N-(3'-Aminopropyl)-2-Pyrrolidinone, 95% (GC) 7663-77-6
11-Bromo-1-undecanol, 97% 1611-56-9
Heneicosanoic acid, 99%(gc) 2363-71-5
(-)-2-Azabicyclo[2.2.1]hept-5-en-3-one, 98%, >95% e.e. 79200-56-9
Coumarin 314, Laser Grade, 99% (UV-Vis) 55804-66-5
(+)-p-(2-Methylbutyl)benzoyl chloride, 98% 62796-32-1
S-Benzylthioglycolic Acid, 97% 103-46-8
N-Carbobenzyloxy-L-Leucine, 95% 2018-66-8
Isopropyl Methanesulfonate 926-06-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net