Search   
MSDS 
:
 Heneicosanoic acid, 99%(gc)
CAS 
:
 2363-71-5
SYNONYMS 
:
 Henicosanoic acid
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2363-71-5 |Heneicosanoic acid | 99 | 219-113-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air. During a fire, irritating and highly
toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use agent most appropriate to extinguish
fire. Use water spray, dry chemical, carbon dioxide, or appropriate
foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Wash area with soap and water. Clean up spills immediately,
observing precautions in the Protective Equipment section. Sweep up,
then place into a suitable container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation. Do not breathe dust or fumes.
Storage:
Store in a tightly closed container. Store in a cool, dry area away
from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 2363-71-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 170 deg C @ .10mbar
Freezing/Melting Point: 74.00 - 76.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: > 110 deg C (> 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 360 deg C
Solubility in water: Not available.
Specific Gravity/Density: Not available.
Molecular Formula: C21H42O2
Molecular Weight: 326.55

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents, reducing agents, bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2363-71-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Heneicosanoic acid -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 2363-71-5: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 2363-71-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2363-71-5 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/24/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3-Bromophenol, 99% (GC) 591-20-8
Furylacrylic acid, 99% 539-47-9
Cholesteryl Chloride, 98% 910-31-6
n-Tridecylamine, 98% 2869-34-3
1,2-Naphthoquinone-4-sulfonic acid sodium salt, 99% 521-24-4
Erythrosin b (cert) 16423-68-0
4'-(Trifluoromethyl)Acetophenone, 99% 709-63-7
Fumaryl Chloride, 95% 627-63-4
Thymol blue sodium salt, reagent acs 62625-21-2
Valeraldehyde, 98% 110-62-3
4-Heptylbenzoic acid, 99% 38350-87-7
3-(2-Iodoacetamido)-PROXYL, free radical 27048-01-7
2-Chloropropionic acid 598-78-7
7-Oxabicyclo(2.2.1)Heptane (1,4-Epoxy-Cyclohexane), 99% 279-49-2
1,1,1,3,3,3-Hexamethyldisilazane, 98% 999-97-3
L-(-)-Alpha-Bromocamphor-Pi-Sulfonic Acid Ammonium Salt 99% 55870-50-3
8-Hydroxyquinoline 148-24-3
Poly(vinyl ethyl ether), low molecular weight 25104-37-4
4,8-Dihydroxyquinoline-2-carboxylic acid, 96% 59-00-7
N-Carbobenzyloxy-L-phenylalanine, 99+% 1161-13-3
2-Thiophenemethylamine, 90-96% (GC) 27757-85-3
Brij 99 (Contains 0.01% BHA and 0.005% Citric Acid added as 9004-98-2
Neodymium(III) oxide, 99.9% 1313-97-9
2-Chlorooctane (pract), 99% (gc) 628-61-5
Nitrosulfonazo III, Indicator Grade 1964-89-2
Dimethyl itaconate, 97% 617-52-7
3-Chlorophenyl isocyanate 2909-38-8
5-(3-Hydroxyphenyl)-5-phenylhydantoin 99+% 30074-03-4
2-Chlorobenzyl cyanide, 97% 2856-63-5
3-Hydroxy-2-methyl-4-pyrone 99% 118-71-8
2,6-Diamino-8-Durinol Hemisulfate Monohydrate 123333-49-3
2'-Hydroxyacetophenone, 99% 118-93-4
Lutetium atomic absorption standard solution, 1 mg/ml Lu in 0.5N HNO3 7439-94-3
Bis(2-ethoxyethyl) adipate, 97% (GC) 109-44-4
1,3-Dibromo-5-Fluoro-2-Iodobenzene, 99+% 62720-29-0
2-Cyanoacetamide, 99% 107-91-5
Molecular Sieves, 4A, 1-2 mm (10 to 18 Mesh) 0-00-1
Barium Cyclohexanebutyrate, 99%, ex Barium 62669-65-2
4-(N-Ethyl-N-2-methanesulfonylaminoethyl)-2-methylphenylenediamine 25646-71-3
Sodium Nitroprusside Dihydrate 13755-38-9
4-(4-Chlorobenzyl)-Pyridine, 98% 4409-11-4
N-(3'-Aminopropyl)-2-Pyrrolidinone, 95% (GC) 7663-77-6
11-Bromo-1-undecanol, 97% 1611-56-9
Heneicosanoic acid, 99%(gc) 2363-71-5
(-)-2-Azabicyclo[2.2.1]hept-5-en-3-one, 98%, >95% e.e. 79200-56-9
Coumarin 314, Laser Grade, 99% (UV-Vis) 55804-66-5
(+)-p-(2-Methylbutyl)benzoyl chloride, 98% 62796-32-1
S-Benzylthioglycolic Acid, 97% 103-46-8
N-Carbobenzyloxy-L-Leucine, 95% 2018-66-8
Isopropyl Methanesulfonate 926-06-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net