Search   
MSDS 
:
 2,6-Difluorobenzoylchloride 99%
CAS 
:
 18063-02-0
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 18063-02-0 |2,6-Difluorobenzoychloride | 99 | 241-971-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 10 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Causes burns.Moisture sensitive.

Potential Health Effects
Eye:
Contact with eyes may cause severe irritation, and possible eye
burns.
Skin:
May cause severe skin irritation with possible burns, especially if
skin is wet or moist.
Ingestion:
May cause irritation of the digestive tract and possible burns.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Flammable liquid and vapor.
Extinguishing Media:
Use agent most appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Ground and bond containers when transferring material. Avoid contact
with eyes, skin, and clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Avoid
ingestion and inhalation. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 18063-02-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless to light yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 72.0 - 77.0 deg C @ 13.00mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 49 deg C ( 120.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: reacts
Specific Gravity/Density: 1.4040g/cm3
Molecular Formula: C7H3ClF2O
Molecular Weight: 176.55

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Ignition sources, excess heat, electrical sparks.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, carbon dioxide, hydrogen fluoride
gas.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 18063-02-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2,6-Difluorobenzoychloride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, N.O.S.*
Hazard Class: 8
UN Number: 1760
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 10 Flammable.
R 34 Causes burns.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
WGK (Water Danger/Protection)
CAS# 18063-02-0: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 18063-02-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 18063-02-0 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/17/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Reagent Alcohol 64-17-5
Rubidium bromide, 99% 7789-39-1
Resorcinol 108-46-3
Chloropicrin, 98+% (GC) 76-06-2
exo-Norborneol, 97% 497-37-0
Dimethyl 1-Methyl-Trans-1,2-Cyclopropanedicarboxylate, 99+% 702-92-1
Rhodamine B, 97% (UV-Vis) 81-88-9
1,3,5-Benzenetricarboxylic acid chloride, 98% 4422-95-1
Betha-(1,4)-2-acetamido-2-deoxy-d-glucose 1398-61-4
trans-2-Benzylamino-1-cyclohexanol, 99+% 40571-86-6
2-Aminopurine, 98% 452-06-2
Ethyl 1-piperidineglyoxylate, 99% 53074-96-7
(S)-(-)-2-Amino-4-Pentenoic Acid, 98% e.e. 16338-48-0
Riboflavin 83-88-5
N-Methyldiethanolamine, 99+% 105-59-9
Disperse Red 19 2734-52-3
(-)-Eburnamonine, 98+% 4877-93-4
2-(2-Pyrazinyl)malondialdehyde
Isopropylamine 75-31-0
4-(Dicyanomethylene)-2-Methyl-6-(P-Dimethylaminostyryl)-4H-Pyran, 51325-91-8
Spironolactone, 99% (tlc) 52-01-7
Sodium Cyanoacetate, 50 wt% Aqueous Solution 1071-36-9
Isopropyl Salicylate, 99% (GC) 607-85-2
Rubidium Chloride 7791-11-9
D-Thyroxine, 97% 51-49-0
Cyclohexane Carboxamide, 97% 1122-56-1
(4-Aminobenzoyl)hydrazide, 95% 5351-17-7
1-Chloro-3-iodobenzene, 98% 625-99-0
2,6-Difluorobenzoylchloride 99% 18063-02-0
4-Bromothiophenol, 95% 106-53-6
o-Phenylene phosphorochloridite, 97% 1641-40-3
4-Hydroxybutyric Acid, Sodium Salt, 99% 502-85-2
n-Acetyl-l-tyrosinamide 1948-71-6
9-Benzhydrylidene-10-anthrone 667-91-4
Dimethyl 5-nitroisophthalate, 98% 13290-96-5
Isonipecotic Acid, 99% 498-94-2
Sodium Hydride, 80% Dispersion in Mineral Oil, Toluene Soluble Bags 7646-69-7
Salicylic acid 69-72-7
2,6-Dibromo-4-Methylaniline 99% 6968-24-7
S(-)-alpha-methylbenzyl isocyanate, 95% 14649-03-7
Mercury(II) cyanide, 99% 592-04-1
3-Hydroxy-1H-Indazole, 99% 7364-25-2
2,2-Pentamethylene-1,3-Dioxolane, 99% 177-10-6
3-Bromopropylamine Hydrobromide, 98% 5003-71-4
4-Chlorophenoxyacetic acid, 98% 122-88-3
L(+)-2-Aminobutyric Acid, 98% 1492-24-6
Neomycin B Sulfate 119-04-0
Trichlorosilane, 99% 10025-78-2
1-Bromo-3-Iodobenzene, 98+% 591-18-4
2,6-Dichloroanisole, 99% 1984-65-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net