Search   
MSDS 
:
 2,6-Diisopropylphenol, 99%
CAS 
:
 2078-54-8
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2078-54-8 |2,6-Diisopropylphenol | 99% | 218-206-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 22 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Irritating to eyes, respiratory system and
skin.Air sensitive.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
Harmful if swallowed. May cause irritation of the digestive tract.
Inhalation:
Dust is irritating to the respiratory tract. The toxicological
properties of this substance have not been fully investigated.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Avoid breathing dust, vapor, mist, or gas. Avoid contact with eyes,
skin, and clothing. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Keep under an argon blanket. Keep refrigerated. (Store below
4C/39F.)

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 2078-54-8:


Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: yellow-tan
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 256 deg C @ 764.00m
Freezing/Melting Point: 18 deg C
Autoignition Temperature: Not available.
Flash Point: > 112 deg C (> 233.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble in toluene and alcohol
Specific Gravity/Density: .9620g/cm3
Molecular Formula:
Molecular Weight: 178.27

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Oxidizing agents, bases, acid chlorides, acid anhydrides.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2078-54-8: SL0810000
LD50/LC50:
CAS# 2078-54-8: Oral, mouse: LD50 = 1100 mg/kg; Oral, rat: LD50 =
500 mg/kg.
Carcinogenicity:
2,6-Diisopropylphenol -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 2078-54-8: No information available.
Canada
CAS# 2078-54-8 is listed on Canada's DSL List.
CAS# 2078-54-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2078-54-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 11/16/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,3-Butanedione monoxime, 96% (uv-vis) 57-71-6
Dimethylglyoxime, reagent ACS 95-45-4
Methyl 3,5-Dibenzyloxybenzoate, 98% 58605-10-0
Diethylamine, 99+% 109-89-7
Bis(2-hydroxyethyl)ether, 99% 111-46-6
2-Methoxyethyl ether, 99% 111-96-6
2-(2-Butoxyethoxy)-ethanol 99+% 112-34-5
2-(2-Ethoxyethoxy)-Ethanol, 98+% 111-90-0
Diethylenetriamine, 98+% 111-40-0
Diisopropylamine, 99+% 108-18-9
Tris(3,3,4,4,5,5,6,6,7,7,8,8-tridecafluorooctyl)phenyltin 175354-30-0
N,N-Dimethylacetamide, 99+% spectrophotometric grade 127-19-5
Dimethyl phthalate, p.a. 131-11-3
2-Hydroxyethyl acrylate, stabilized, 97% 818-61-1
4-Fluorophenylboronic Acid 1765-93-1
1-(3-Dimethylaminopropyl)-3-Ethylcarbodiimide Methiodide, 98% 22572-40-3
2-Chlorophenothiazine, 99% 92-39-7
Ethyl Butyrylacetate, 98% 3249-68-1
3-Methoxypropylisothiocyanate 17702-11-3
2,6-Dibenzylidenecyclohexanone 897-78-9
(1R,2R)-2-Amino-1-(4-Nitrophenyl)Propane-1,3-Diol, 96% 716-61-0
Docosanoic Acid, Tech. 85% 112-85-6
Silica gel, for column chromatography, 0.035-0.070 mm, pore diameter 7631-86-9
Phenylazoformic acid 2-phenylhydrazide, suitable for colorimetric 538-62-5
sym-Diphenylcarbazide, 99+% 140-22-7
Diphenylamine-4-sulfonic acid sodium salt, reagent acs 6152-67-6
Cis-2, trans-4-hexadiene 5194-50-3
Diphenylthiocarbazone, reagent ACS, 85+% (UV-VIS) 60-10-6
2,6-Diisopropylphenol, 99% 2078-54-8
3-Heptanone, 98% 106-35-4
2,2'-Dipyridyl, 99+% 366-18-7
Dodecane, Spectro Grade, 98% (GC) 112-40-3
Diethyl Acetamidomalonate, 99+% 1068-90-2
Brij 35 7732-18-5
1-(Pyrrolidino)-1-cyclohexene 1125-99-1
(4S)-(+)-4-Benzyl-3-Propionyl-2-Oxazolidinone, 97% 101711-78-8
N-[(1S)-2-Hydroxy-1-Phenethyl)]Ethoxycarboxamide 0-01-1
Dodecyl Sulfate, Sodium Salt, 99% 151-21-3
Eosin B (Cert) 548-24-3
Ethanolamine, scintillation grade (CO2 absorber) 141-43-5
(R)-(+)-2-(tert-Butoxycarbonylamino)-3-phenyl-1-propanol, 98% 106454-69-7
(R)-1-(2-Hydroxy-1-Phenylethyl)-1,5-Dihydropyrrol-2-One 158271-95-5
Chelerythrine chloride 3895-92-9
Cyclopiazonic Acid 18172-33-3
D609 Potassium Salt 83373-60-8
Daidzein, 98% 486-66-8
Fumonisin B1, 98% 116355-83-0
Sodium Tert. Butoxide 865-48-5
1-(4-Hydroxyphenyl)piperazine dihydrobromide 38869-37-3
1,2-Benzenedithiol, 96% 17534-15-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net