Search   
MSDS 
:
 Diphenylamine-4-sulfonic acid sodium salt, reagent acs
CAS 
:
 6152-67-6
SYNONYMS 
:
 4-(Phenylamino)benzenesulfonic acid monosodium salt; Sodium diphenyl     amine-4-sulfonate.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 6152-67-6 |Diphenylaminesulfonic acid sodium salt| 100 | 228-165-6 |
| | | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
Dust may cause mechanical irritation.
Skin:
May cause skin irritation. Low hazard for usual industrial handling.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. Expected to be a low ingestion hazard.
Inhalation:
May cause respiratory tract irritation. Low hazard for usual
industrial handling.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. If irritation
develops, get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Antidote:
No specific antidote exists.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. This material in sufficient quantity and reduced
particle size is capable of creating a dust explosion.
Extinguishing Media:
For small fires, use water spray, dry chemical, carbon dioxide or
chemical foam. Use water spray to cool fire-exposed containers.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Store in a cool, dry place. Keep from contact with oxidizing
materials. Store in a cool, dry, well-ventilated area away from
incompatible substances. Keep containers tightly closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 6152-67-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white to off-white
Odor: none reported
pH: Not available.
Vapor Pressure: Negligible.
Viscosity: Not available.
Boiling Point: Not applicable.
Freezing/Melting Point: 392 deg F
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Very soluble in water.
Specific Gravity/Density: Not available.
Molecular Formula: C12H10NNaO3S
Molecular Weight: 271.26

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Materials containing similar functional groups can decompose at
elevated temperatures.
Conditions to Avoid:
Incompatible materials, dust generation.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 6152-67-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Diphenylaminesulfonic acid sodium salt -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 6152-67-6: No information available.
Canada
CAS# 6152-67-6 is listed on Canada's DSL List.
CAS# 6152-67-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 6152-67-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 11/09/1998 Revision #5 Date: 3/04/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,3-Butanedione monoxime, 96% (uv-vis) 57-71-6
Dimethylglyoxime, reagent ACS 95-45-4
Methyl 3,5-Dibenzyloxybenzoate, 98% 58605-10-0
Diethylamine, 99+% 109-89-7
Bis(2-hydroxyethyl)ether, 99% 111-46-6
2-Methoxyethyl ether, 99% 111-96-6
2-(2-Butoxyethoxy)-ethanol 99+% 112-34-5
2-(2-Ethoxyethoxy)-Ethanol, 98+% 111-90-0
Diethylenetriamine, 98+% 111-40-0
Diisopropylamine, 99+% 108-18-9
Tris(3,3,4,4,5,5,6,6,7,7,8,8-tridecafluorooctyl)phenyltin 175354-30-0
N,N-Dimethylacetamide, 99+% spectrophotometric grade 127-19-5
Dimethyl phthalate, p.a. 131-11-3
2-Hydroxyethyl acrylate, stabilized, 97% 818-61-1
4-Fluorophenylboronic Acid 1765-93-1
1-(3-Dimethylaminopropyl)-3-Ethylcarbodiimide Methiodide, 98% 22572-40-3
2-Chlorophenothiazine, 99% 92-39-7
Ethyl Butyrylacetate, 98% 3249-68-1
3-Methoxypropylisothiocyanate 17702-11-3
2,6-Dibenzylidenecyclohexanone 897-78-9
(1R,2R)-2-Amino-1-(4-Nitrophenyl)Propane-1,3-Diol, 96% 716-61-0
Docosanoic Acid, Tech. 85% 112-85-6
Silica gel, for column chromatography, 0.035-0.070 mm, pore diameter 7631-86-9
Phenylazoformic acid 2-phenylhydrazide, suitable for colorimetric 538-62-5
sym-Diphenylcarbazide, 99+% 140-22-7
Diphenylamine-4-sulfonic acid sodium salt, reagent acs 6152-67-6
Cis-2, trans-4-hexadiene 5194-50-3
Diphenylthiocarbazone, reagent ACS, 85+% (UV-VIS) 60-10-6
2,6-Diisopropylphenol, 99% 2078-54-8
3-Heptanone, 98% 106-35-4
2,2'-Dipyridyl, 99+% 366-18-7
Dodecane, Spectro Grade, 98% (GC) 112-40-3
Diethyl Acetamidomalonate, 99+% 1068-90-2
Brij 35 7732-18-5
1-(Pyrrolidino)-1-cyclohexene 1125-99-1
(4S)-(+)-4-Benzyl-3-Propionyl-2-Oxazolidinone, 97% 101711-78-8
N-[(1S)-2-Hydroxy-1-Phenethyl)]Ethoxycarboxamide 0-01-1
Dodecyl Sulfate, Sodium Salt, 99% 151-21-3
Eosin B (Cert) 548-24-3
Ethanolamine, scintillation grade (CO2 absorber) 141-43-5
(R)-(+)-2-(tert-Butoxycarbonylamino)-3-phenyl-1-propanol, 98% 106454-69-7
(R)-1-(2-Hydroxy-1-Phenylethyl)-1,5-Dihydropyrrol-2-One 158271-95-5
Chelerythrine chloride 3895-92-9
Cyclopiazonic Acid 18172-33-3
D609 Potassium Salt 83373-60-8
Daidzein, 98% 486-66-8
Fumonisin B1, 98% 116355-83-0
Sodium Tert. Butoxide 865-48-5
1-(4-Hydroxyphenyl)piperazine dihydrobromide 38869-37-3
1,2-Benzenedithiol, 96% 17534-15-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net