Search   
MSDS 
:
 2-Bromoethylamine Hydrobromide, 99%
CAS 
:
 2576-47-8
SYNONYMS 
:
 Ethanamine, 2-bromo-, Hydrobromide.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2576-47-8 |2-Bromoethylamine hydrobromide | 99 | 219-924-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to respiratory system and skin.Hygroscopic (absorbs
moisture from the air).

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation. Aspiration may cause
respiratory swelling and pneumonitis.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. If irritation
develops, get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Containers may explode in
the heat of a fire.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use agent most appropriate to extinguish
fire. Cool containers with flooding quantities of water until well
after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Minimize dust generation and accumulation. Avoid
contact with eyes, skin, and clothing. Avoid ingestion and
inhalation.
Storage:
Store in a cool, dry place. Keep container closed when not in use.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits. Use process
enclosure, local exhaust ventilation, or other engineering controls
to control airborne levels.
Exposure Limits
CAS# 2576-47-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Wear a NIOSH/MSHA or European Standard EN 149
approved full-facepiece airline respirator in the
positive pressure mode with emergency escape
provisions.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 100-105C @ 18mm Hg
Freezing/Melting Point: 172.00 - 176.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: soluble in water
Specific Gravity/Density:
Molecular Formula: C2H6BrN.HBr
Molecular Weight: 204.90

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, hydrogen bromide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2576-47-8: KQ8225000
LD50/LC50:
Not available.
Carcinogenicity:
2-Bromoethylamine hydrobromide -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 37/38 Irritating to respiratory system and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 2576-47-8: No information available.
Canada
CAS# 2576-47-8 is listed on Canada's NDSL List.
CAS# 2576-47-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2576-47-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/17/1998 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
L-Epicatechin, Mixture of ca.60% (-)-Epicatechin and ca.40% Catechin 490-46-0
2,4,6-Tri-2-Pyridyl-S-Triazine, 99% 3682-35-7
Oxalacetic acid, 96% 328-42-7
Nile Blue Hydrochloride 2381-85-3
Dimethylsulfamoyl Chloride, 97% 13360-57-1
Adenine Sulfate 98% 321-30-2
3,3'-Diethylthiatricarbocyanine Iodide 3071-70-3
7-Chlortetracycline Monohydrochloride, Potency 900 mu/mg 64-72-2
4-Aminobenzoic Acid, Sodium Salt, 99% 555-06-6
Sodium Thiocarbonate (40% in Water) 534-18-9
n-Acetyl-s-benzyl-l-cysteine 19542-77-9
3-Hydroxypropionitrile, 98% 109-78-4
2-Ethylhexanoic acid, 99% 149-57-5
Trans,Trans-1,4-Diphenyl-1,3-Butadiene, 99% 886-65-7
Benzyl chloride, stabilized, 99.5+% (with 0.25% propylene oxide) 75-56-9
Benzyl chloride, pract., 90% 100-44-7
Azure b, high purity biological stain 531-55-5
4-Amino-3-Hydroxy-1-Naphthalenesulfonic Acid, 95% 116-63-2
2-Bromoethylamine Hydrobromide, 99% 2576-47-8
2-Nitrophenol, 99% 88-75-5
Diethoxydimethylsilane, 97% 78-62-6
Calcium sulfate, anhydrous, 99% 7778-18-9
Drierite, 6 mesh, without indicator 7778-18-9
Drierite, 8 mesh, without indicator 7778-18-9
Drierite, 10-20 mesh, without indicator 7778-18-9
Drierite, 20-40 mesh, without indicator 7778-18-9
Drierite, 4 mesh, with indicator 7778-18-9
Drierite, 8 mesh, with indicator 7778-18-9
Drierite, 20-40 mesh, with indicator 7778-18-9
4,4,4-Trifluoro-1-phenyl-1,3-butanedione, 99% 326-06-7
2-Bromoethanesulfonic Acid, Sodium Salt, 98% 4263-52-9
Sodium 4-Nitrophenoxide, Hydrate, 98% (On Dry Basis) 824-78-2
2-Octylamine 693-16-3
4-Nitrobenzyl chloride, 99% 100-14-1
Palmitic Acid, 98% (GC) 57-10-3
n-Butyllithium, 1.6M solution in hexanes 109-72-8
n-Butyllithium (15% in heptane) 109-72-8
Barium Fluoride, 99.99% 7787-32-8
Decanoic Acid (Capric Acid), 96% 334-48-5
trans-4-Butyl-alpha-chloro-4'-etoxystilben 99+% 54513-47-2
Cyclohexanepropionic Acid, 99% 701-97-3
Carbon tetrachloride, 99% 56-23-5
Carbon Tetrachloride, P.A. 56-23-5
Carbon Tetrachloride, Low Absorbance at 2900 to 3050 cm-1 56-23-5
Lauric Acid, 95% 143-07-7
N,N,N',N'-Tetraethylethylenediamine 150-77-6
Phenyl chloroformate, 99% (gc) 1885-14-9
Methyl-p-benzoquinone, 99+% 553-97-9
1-Phenylpiperazine, 97% 92-54-6
3,4-Dimercaptotoluene, 99% 496-74-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net