Search   
MSDS 
:
 Calcium sulfate, anhydrous, 99%
CAS 
:
 7778-18-9
SYNONYMS 
:
 Crysalba; Drierite; Thiolite
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7778-18-9 |Calcium sulfate, anhydrous | 99 | 231-900-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes and respiratory system.Hygroscopic (absorbs
moisture from the air).

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause digestive tract disturbances.
Inhalation:
Causes respiratory tract irritation. Inhalation of dusts may cause
nervous system complaints, ulceration of the mucous membranes of the
nose and throat, epistaxis, headache, irritation and nervousness.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Avoid ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep
containers tightly closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 7778-18-9:
United States OSHA: 15 mg/m3 TWA (total dust); 5 mg/m3 TWA
(respirable fraction)
Belgium - TWA: 10 mg/m3 VLE
Germany: 6 mg/m3 TWA (respirable fraction)
Malaysia: 10 mg/m3 TWA (particulate matter containing no asbestos
<2% crystalline sili
Spain: 10 mg/m3 VLA-ED (this value is for the particulated matter
that is free from asb

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: colorless to white
Odor: odorless
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 1450 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: slightly soluble
Specific Gravity/Density: 2.9600g/cm3
Molecular Formula: CaO4S
Molecular Weight: 136.14

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, moisture, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Oxides of sulfur, irritating and toxic fumes and gases.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7778-18-9: WS6920000
LD50/LC50:
Not available.
Carcinogenicity:
Calcium sulfate, anhydrous -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37 Irritating to eyes and respiratory system.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 7778-18-9: 0
Canada
CAS# 7778-18-9 is listed on Canada's DSL List.
CAS# 7778-18-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7778-18-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/23/1998 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
L-Epicatechin, Mixture of ca.60% (-)-Epicatechin and ca.40% Catechin 490-46-0
2,4,6-Tri-2-Pyridyl-S-Triazine, 99% 3682-35-7
Oxalacetic acid, 96% 328-42-7
Nile Blue Hydrochloride 2381-85-3
Dimethylsulfamoyl Chloride, 97% 13360-57-1
Adenine Sulfate 98% 321-30-2
3,3'-Diethylthiatricarbocyanine Iodide 3071-70-3
7-Chlortetracycline Monohydrochloride, Potency 900 mu/mg 64-72-2
4-Aminobenzoic Acid, Sodium Salt, 99% 555-06-6
Sodium Thiocarbonate (40% in Water) 534-18-9
n-Acetyl-s-benzyl-l-cysteine 19542-77-9
3-Hydroxypropionitrile, 98% 109-78-4
2-Ethylhexanoic acid, 99% 149-57-5
Trans,Trans-1,4-Diphenyl-1,3-Butadiene, 99% 886-65-7
Benzyl chloride, stabilized, 99.5+% (with 0.25% propylene oxide) 75-56-9
Benzyl chloride, pract., 90% 100-44-7
Azure b, high purity biological stain 531-55-5
4-Amino-3-Hydroxy-1-Naphthalenesulfonic Acid, 95% 116-63-2
2-Bromoethylamine Hydrobromide, 99% 2576-47-8
2-Nitrophenol, 99% 88-75-5
Diethoxydimethylsilane, 97% 78-62-6
Calcium sulfate, anhydrous, 99% 7778-18-9
Drierite, 6 mesh, without indicator 7778-18-9
Drierite, 8 mesh, without indicator 7778-18-9
Drierite, 10-20 mesh, without indicator 7778-18-9
Drierite, 20-40 mesh, without indicator 7778-18-9
Drierite, 4 mesh, with indicator 7778-18-9
Drierite, 8 mesh, with indicator 7778-18-9
Drierite, 20-40 mesh, with indicator 7778-18-9
4,4,4-Trifluoro-1-phenyl-1,3-butanedione, 99% 326-06-7
2-Bromoethanesulfonic Acid, Sodium Salt, 98% 4263-52-9
Sodium 4-Nitrophenoxide, Hydrate, 98% (On Dry Basis) 824-78-2
2-Octylamine 693-16-3
4-Nitrobenzyl chloride, 99% 100-14-1
Palmitic Acid, 98% (GC) 57-10-3
n-Butyllithium, 1.6M solution in hexanes 109-72-8
n-Butyllithium (15% in heptane) 109-72-8
Barium Fluoride, 99.99% 7787-32-8
Decanoic Acid (Capric Acid), 96% 334-48-5
trans-4-Butyl-alpha-chloro-4'-etoxystilben 99+% 54513-47-2
Cyclohexanepropionic Acid, 99% 701-97-3
Carbon tetrachloride, 99% 56-23-5
Carbon Tetrachloride, P.A. 56-23-5
Carbon Tetrachloride, Low Absorbance at 2900 to 3050 cm-1 56-23-5
Lauric Acid, 95% 143-07-7
N,N,N',N'-Tetraethylethylenediamine 150-77-6
Phenyl chloroformate, 99% (gc) 1885-14-9
Methyl-p-benzoquinone, 99+% 553-97-9
1-Phenylpiperazine, 97% 92-54-6
3,4-Dimercaptotoluene, 99% 496-74-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net