Search   
MSDS 
:
 Polyvinylsulfuric acid potassium salt, 90% (elem.analysis, c, h, k
CAS 
:
 26837-42-3
SYNONYMS 
:
 Potassium Poly(vinyl sulfate); PVSK; Sulfuric acid, monoethenyl     ester, homoploymer, potassium salt.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 26837-42-3 |Polyvinylsulfuric acid potassium salt | 90.0 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation. Dust may cause mechanical irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Runoff from
fire control or dilution water may cause pollution.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid ingestion and
inhalation.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 26837-42-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: light yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 0 deg C
Autoignition Temperature: Not available.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula:
Molecular Weight:

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Oxides of sulfur, irritating and toxic fumes and gases, oxides of
potassium.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 26837-42-3: WT1124000
LD50/LC50:
Not available.
Carcinogenicity:
Polyvinylsulfuric acid potassium salt -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 26837-42-3: No information available.
Canada
CAS# 26837-42-3 is listed on Canada's DSL List.
CAS# 26837-42-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 26837-42-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/02/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Diethylbenzene (Mixture of 1,2-1,3-and 1,4-Isomers, Sum Min. 95%) 25340-17-4
5-Ethyl-2-thiophenecarboxaldehyde, 98+% 36880-33-8
4-Amino-Heptafluorotoluene, 95% (GC) 0-00-1
Flavone, 99+% (TLC) 525-82-6
4-Bromo-1-Chloro-2-Fluorobenzene, 98+% 60811-18-9
2,6-Dibromoaniline, 97% 608-30-0
4-Epi-Oxytetracycline,"can be used as Secondary Standard" 35259-39-3
Polyvinylsulfuric acid potassium salt, 90% (elem.analysis, c, h, k 26837-42-3
1,8-Naphthalimide, 94%(tlc) 81-83-4
4-Bromo-1,1,2-trifluoro-1-butene 10493-44-4
Diethyl Sebacate, 90% (gc) 110-40-7
trans-3-Hexen-1-ol, 95% (gc) 928-97-2
Resorufin (pract) 635-78-9
Adenosine 5'-Monophosphate, 99% 61-19-8
l-(+)-Norleucine, 99+% 327-57-1
3,4-Difluoronitrobenzene, 99% 369-34-6
2-Ethylthiophene, 99% 872-55-9
Adenosine-2'-Monophosphate Hemihydrate, 99% 81012-86-4
Exton Albumin Reagent 97-05-2
n-Butylurea 99% 592-31-4
2,2-Dimethyl-4-ethenyl-1,3-dioxolane 83968-02-9
N-Methylbenzothiazole-2-Thione, 99% 2254-94-6
Pyrimidine, 99% 289-95-2
Palladium on 1/8" Alumina Pellets (0.5% Pd) 1314-08-5
Dimethyl (2-oxoheptyl)-phosphonate, 98% 36969-89-8
Trimethylacetyl chloride, 99% 3282-30-2
2-Cyclopenten-1-one ethylene ketal, 95% 695-56-7
Tetrazolium violet, 98+% 1719-71-7
2-Bromo-4-Fluorobenzoic acid, 98% 1006-41-3
5-Sulfoisophthalic acid monolithium salt, 98% 46728-75-0
Anhydrochlortetracycline Hydrochloride can be used as Secondary 4497-08-9
3-(Chlorosulfonyl)benzoic acid,98% (titr.) 4025-64-3
Tripiperidinophosphine oxide, 98% 4441-17-2
2,3,3-Trichlorotetrahydro-2H-Pyran, 97+% 0-00-1
1-Methoxy-2-Indanol, 98% 56175-44-1
4'-Methylacetophenone, 95% 122-00-9
1,4-Hexadiene (mixture of cis and trans), 99% 592-45-0
2-Nitrobenzenesulfonyl chloride, 94% 1694-92-4
2-Nitrophenyl-2-acetamido-2-deoxy-alpha-d- glucopyranoside, 99+% 10139-01-2
Phenyl chlorothionocarbonate, 99% 1005-56-7
5-Aminoorotic Acid, 99% 7164-43-4
L-(+)-alpha-Phenylglycine, 99% 2935-35-5
P-Phenylenedipropionic Acid, 98% 4251-21-2
2-(4-Chlorophenyl)-2-Methylpropionic Acid, 98% 6247-28-5
Cyclohexyl Isocyanate, 98% 3173-53-3
4-(Trifluoromethoxy)benzyl bromide, 99+% 50824-05-0
1,3-Diiodobenzene 626-00-6
Trimethyl borate, 99% 121-43-7
Trifluoroacetic acid, silver salt, 98% 2966-50-9
3-Nitro-2-pentanol, 99% 5447-99-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net