**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 4691-65-0 |Inosine-5'-Monophosphate, Disodium Sal| 99+ | 225-146-4 |
| |t Hydrate | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Not available.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
Ingestion of large amounts may cause gastrointestinal irritation.
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Not available.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Remove
contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Avoid ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 4691-65-0:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Crystals
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 175 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Soluble.
Specific Gravity/Density:
Molecular Formula: C10H11N4O8PNa2.xH2O
Molecular Weight: 392.16
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Not available.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, oxides of phosphorus, irritating
and toxic fumes and gases, carbon dioxide, sodium oxide.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 4691-65-0: NM7519500
LD50/LC50:
CAS# 4691-65-0: Oral, mouse: LD50 = 12 gm/kg; Oral, rat: LD50 =
15900 mg/kg.
Carcinogenicity:
Inosine-5'-Monophosphate, Disodium Salt Hydrate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 4691-65-0: No information available.
Canada
CAS# 4691-65-0 is listed on Canada's DSL List.
CAS# 4691-65-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 4691-65-0 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 6/30/1998 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Chloroacetic Acid, P.A.
| 79-11-8 |
|
N-Formyl-3-Methoxy-Morpholine, 95%
| 61020-09-5 |
|
Chloroacetic Acid, Flakes, 99%
| 79-11-8 |
|
Methanesulfonic Acid, Tech., 70%
| 75-75-2 |
|
Formic Acid, Reagent ACS, 96+% (Titr.)
| 64-18-6 |
|
Formic Acid, Reagent ACS, 88+% (Titr.)
| 64-18-6 |
|
Formic Acid, P.A.
| 64-18-6 |
|
Formic Acid, 99%
| 64-18-6 |
|
Hydrochloric Acid 1 N or 1 M Solution
| 7647-01-0 |
|
Hydrochloric Acid, C.P.
| 7647-01-0 |
|
2,3,4,6-Tetra-o-acetyl-alpha-d-glucopyrano syl bromide, 98.5%,
| 572-09-6 |
|
Hydrochloric Acid, Reagent ACS
| 7647-01-0 |
|
Hydrochloric Acid, P.A., Min. 37%
| 7647-01-0 |
|
Inosine 5'-Monophosphate, Disodium Salt Hydrate, 99+%
| 4691-65-0 |
|
Hydrochloric Acid, 0.1N Standard Solution
| 7647-01-0 |
|
Hydrochloric Acid, 1N Standard Solution
| 7647-01-0 |
|
Methyl 3-Trifluoromethylbenzoylacetate
| |
|
Deuterium Chloride, 20 wt% Solution in D2O 99+ Atom % D
| 7698-05-7 |
|
]1,3-Benzodioxole, 99%
| 274-09-9 |
|
Deuterium Oxide, 100.0 Atom % D
| 7789-20-0 |
|
Deuterium Oxide, 100.0 Atom % D Low in Paramagnetic Impurities
| 7789-20-0 |
|
Octamethyltrisiloxane, 98%
| 107-51-7 |
|
Water, Deuterium-Depleted
| 7732-18-5 |
|
Water for HPLC
| 7732-18-5 |
|
Ammonium Iron (II) Sulfate Hexahydrate, P.A.
| 7783-85-9 |
|
Ammonium Iron (II) Sulfate Hexahydrate, Reagent ACS (Crystals)
| 7783-85-9 |
|
Ammonium iron(iii) sulfate dodecahydrate, p.a.
| 7783-83-7 |
|
Ammonium iron(iii) sulfate dodecahydrate, reagent acs (crystals)
| 7783-83-7 |
|
Methyl Butyrate, 99% (GC)
| 623-42-7 |
|
Diphenylamine, 99%
| 122-39-4 |
|
Hydrochloric Acid 5 to 6N Solution in 2-Propanol
| 67-63-0 |
|
2,3-Benzofluorene, Tech.,90%
| 243-17-4 |
|
Diphenylamine, p.a.; redox-indicator
| 122-39-4 |
|
Silicon (IV) Chloride, 99.8+%
| 10026-04-7 |
|
Diphenylamine, reagent acs
| 122-39-4 |
|
Sodium Hypochlorite (5% Chlorine), Reagent
| 7681-52-9 |
|
Hydrochloric acid, 0.5N solution
| 7647-01-0 |
|
Hydrochloric acid, 2N solution
| 7647-01-0 |
|
Hydrochloric Acid, 1:1 Aqueous Solution
| 7647-01-0 |
|
Ferric Ammonium Sulfate Indicator Solution
| 7664-93-9 |
|
Hexamine Solution
| 100-97-0 |
|
Perchloric Acid, 0.100 N Solution
| 64-19-7 |
|
Phenolphthalein, 0.5% IPA Solution
| 67-63-0 |
|
Test MSDS
| 67-63-0 |
|
This is new.
| |
|
Hello
| |
|
fgfghjfgkh
| 4252-78-2 |
|
Sodium hydroxide, purum, pellets
| 1310-73-2 |
|
Sodium hydroxide, pellets, p.a.
| 1310-73-2 |
|
Sodium hydroxide, reagent ACS, pellets, 97+%
| 1310-73-2 |
|
|