Search    
MSDS
: 
 l-Bornyl acetate
CAS
: 
 5655-61-8
SYNONYMS
: 
 Acetate, 1,7,7-trimethyl-bicyclo[2.2.1]hept-2-yl-, (1S-endo)-;     Bicyclo[2.2.1]heptan-2-ol, 1,7,7-trimethyl-, acetate, (1-endo)-;     Bicyclo[2.2.1]heptan-2-ol, 1,7,7-trimethyl-, acetate, (1S-endo)-;     L-Born-2-yl acetate
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 5655-61-8 |l-Bornyl acetate | 95 | 227-101-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Water may be ineffective.
Material is lighter than water and a fire may be spread by the use of
water. Combustible liquid. Vapors may be heavier than air. They can
spread along the ground and collect in low or confined areas.
Containers may explode when heated.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Avoid contact
with eyes, skin, and clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Avoid
ingestion and inhalation. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 5655-61-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: Turbid Liquid
Odor: None reported.
pH: Not available.
Vapor Pressure: 0.6 mmHg @ 20 C
Viscosity: Not available.
Boiling Point: 223.0 - 224.0 deg C @ 760.00m
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 84 deg C ( 183.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: miscible with 95% alcohol and ether
Specific Gravity/Density: .9820g/cm3
Molecular Formula: C12H20O2
Molecular Weight: 196.29

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 5655-61-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
l-Bornyl acetate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Bacteria: Phytobacterium phosphoreum: EC50 = 0.29-1.03 mg/L; 5,15,30
min; Microtox test at 15C

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 5655-61-8: No information available.
Canada
CAS# 5655-61-8 is listed on Canada's DSL List.
CAS# 5655-61-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 5655-61-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/26/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Amino-1,3-Propanediol, 98% 534-03-2
1,7-Octadiene, 98.5% 3710-30-3
(2-Bromoethyl)benzene, 98% 103-63-9
4-Piperidinopiperidine, tech., 95% 4897-50-1
4'-Bromopropiophenone, 97% 10342-83-3
Thiophenol 108-98-5
1,2,4-Trivinylcyclohexane, 98% mixture of isomers 2855-27-8
l-Bornyl acetate 5655-61-8
Cyclopentadecanone, 96% 502-72-7
1,14-Tetradecanediol, 95% (GC) 19812-64-7
3-Heptylthiophene, 97% 65016-61-7
2,4-Dimethyl-6-Hydroxypyrimidine, 99+% 6622-92-0
3-(2-Chloroethyl)-2,4(1H,3H)-Quinazoline- Dione, 99% 5081-87-8
3,5-Dimethyl-4-heptanone, 97+% 19549-84-9
N-Methyl-p-anisidine, 98% 5961-59-1
m-Toluenethiol, 97% (GC) 108-40-7
Dehydroabietylamine, tech. 1446-61-3
Zirconium atomic absorption standard solution, 1 mg/ml Zr in 5% HF 7440-67-7
DL-Bromosuccinic Acid, 96% 923-06-8
3-Chloropropiophenone, 98% 936-59-4
Hexadecyltrimethylammonium chloride, 99% 112-02-7
2,5-Dichlorothiophene, 98% 3172-52-9
Stigmastanol, Tech. 19466-47-8
3-Acetamido-4-methoxybenzenesulfinic acid, hydrate, 97%
2,4-Dinitrobenzenesulfonic Acid Sodium Salt, 98% (UV-Vis) 885-62-1
2-Methylindole, 98% 95-20-5
(R)-(+)-2-Chloropropionic acid, 98% 598-78-7
m-Phosphoric Acid, Glacial 37267-86-0
2-Ethylhexyl acrylate, 99+% stabilized with 10-20 ppm MEHQ 103-11-7
2-Chloropropane, P.A. 75-29-6
m-Xylene 108-38-3
4-Chloro-3,5-Dinitrobenzotrifluoride 98+% 393-75-9
Crotyl bromide, 85 %(gc-cap.), remainder 3-bromo-1-butene 29576-14-5
n-Dodecyl sulfide, 93% 2469-45-6
6-Nitropiperonyl Alcohol, 98% 15341-08-9
Methyl 2-methoxybenzoate, 99% 606-45-1
Magnesium, turnings and ribbons 7439-95-4
Magnesium acetate tetrahydrate 16674-78-5
Formaldoxime Trimer Hydrochloride 62479-72-5
4-Ethoxy-1,3-Phenylenediamine Dihydro-Chloride, 98% 67801-06-3
Erbium atomic absorption standard solution, 1 mg/ml Er in 2% HNO3 7440-52-0
Dithiothreitol, 99% 3483-12-3
2,5-Dichloroaniline, 99% 95-82-9
Dimesitylcyclopropenone, 99% (uv-vis) 61440-88-8
Alpha-Cyclodextrin Hydrate, 98+% (HPLC) 10016-20-3
Magnesium Bromide Hexahydrate 13446-53-2
Magnesium carbonate anhydrous 546-93-0
Silver cyanate 3315-16-0
2,3,4,6-Tetra-o-acetyl-alpha-d-glucopyranosyl azide, 95% 20369-61-7
Magnesium Chloride Hexahydrate 7791-18-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net