Search   
MSDS 
:
 N-Methyl-p-anisidine, 98%
CAS 
:
 5961-59-1
SYNONYMS 
:
 N-Methyl-4-anisidine
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 5961-59-1 |N-Methyl-p-anisidine | 98 | 227-735-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21/22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.The
toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 5961-59-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: clear dark yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 135.0 - 136.0 deg C @ 19.00mm
Freezing/Melting Point: 34.00 - 36.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: > 112 deg C (> 233.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: Not available.
Molecular Formula: C8H11NO
Molecular Weight: 137.18

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation.
Incompatibilities with Other Materials:
Oxidizing agents, acid chlorides, acid anhydrides, acids.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 5961-59-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
N-Methyl-p-anisidine -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
IMO
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
RID/ADR
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 23 Do not inhale gas/fumes/vapour/spray.
WGK (Water Danger/Protection)
CAS# 5961-59-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 5961-59-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 5961-59-1 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Amino-1,3-Propanediol, 98% 534-03-2
1,7-Octadiene, 98.5% 3710-30-3
(2-Bromoethyl)benzene, 98% 103-63-9
4-Piperidinopiperidine, tech., 95% 4897-50-1
4'-Bromopropiophenone, 97% 10342-83-3
Thiophenol 108-98-5
1,2,4-Trivinylcyclohexane, 98% mixture of isomers 2855-27-8
l-Bornyl acetate 5655-61-8
Cyclopentadecanone, 96% 502-72-7
1,14-Tetradecanediol, 95% (GC) 19812-64-7
3-Heptylthiophene, 97% 65016-61-7
2,4-Dimethyl-6-Hydroxypyrimidine, 99+% 6622-92-0
3-(2-Chloroethyl)-2,4(1H,3H)-Quinazoline- Dione, 99% 5081-87-8
3,5-Dimethyl-4-heptanone, 97+% 19549-84-9
N-Methyl-p-anisidine, 98% 5961-59-1
m-Toluenethiol, 97% (GC) 108-40-7
Dehydroabietylamine, tech. 1446-61-3
Zirconium atomic absorption standard solution, 1 mg/ml Zr in 5% HF 7440-67-7
DL-Bromosuccinic Acid, 96% 923-06-8
3-Chloropropiophenone, 98% 936-59-4
Hexadecyltrimethylammonium chloride, 99% 112-02-7
2,5-Dichlorothiophene, 98% 3172-52-9
Stigmastanol, Tech. 19466-47-8
3-Acetamido-4-methoxybenzenesulfinic acid, hydrate, 97%
2,4-Dinitrobenzenesulfonic Acid Sodium Salt, 98% (UV-Vis) 885-62-1
2-Methylindole, 98% 95-20-5
(R)-(+)-2-Chloropropionic acid, 98% 598-78-7
m-Phosphoric Acid, Glacial 37267-86-0
2-Ethylhexyl acrylate, 99+% stabilized with 10-20 ppm MEHQ 103-11-7
2-Chloropropane, P.A. 75-29-6
m-Xylene 108-38-3
4-Chloro-3,5-Dinitrobenzotrifluoride 98+% 393-75-9
Crotyl bromide, 85 %(gc-cap.), remainder 3-bromo-1-butene 29576-14-5
n-Dodecyl sulfide, 93% 2469-45-6
6-Nitropiperonyl Alcohol, 98% 15341-08-9
Methyl 2-methoxybenzoate, 99% 606-45-1
Magnesium, turnings and ribbons 7439-95-4
Magnesium acetate tetrahydrate 16674-78-5
Formaldoxime Trimer Hydrochloride 62479-72-5
4-Ethoxy-1,3-Phenylenediamine Dihydro-Chloride, 98% 67801-06-3
Erbium atomic absorption standard solution, 1 mg/ml Er in 2% HNO3 7440-52-0
Dithiothreitol, 99% 3483-12-3
2,5-Dichloroaniline, 99% 95-82-9
Dimesitylcyclopropenone, 99% (uv-vis) 61440-88-8
Alpha-Cyclodextrin Hydrate, 98+% (HPLC) 10016-20-3
Magnesium Bromide Hexahydrate 13446-53-2
Magnesium carbonate anhydrous 546-93-0
Silver cyanate 3315-16-0
2,3,4,6-Tetra-o-acetyl-alpha-d-glucopyranosyl azide, 95% 20369-61-7
Magnesium Chloride Hexahydrate 7791-18-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net