Search   
MSDS 
:
 DL-Bromosuccinic Acid, 96%
CAS 
:
 923-06-8
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 923-06-8 |DL-Bromosuccinic Acid | 96 | 213-087-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated. Can produce delayed
pulmonary edema.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Get medical aid. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid ingestion and
inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 923-06-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 165 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble in ether
Specific Gravity/Density:
Molecular Formula: C4H5BrO4
Molecular Weight: 196.99

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases, strong reducing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, bromine fumes.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 923-06-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
DL-Bromosuccinic Acid -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 923-06-8: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 923-06-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 923-06-8 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/06/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Amino-1,3-Propanediol, 98% 534-03-2
1,7-Octadiene, 98.5% 3710-30-3
(2-Bromoethyl)benzene, 98% 103-63-9
4-Piperidinopiperidine, tech., 95% 4897-50-1
4'-Bromopropiophenone, 97% 10342-83-3
Thiophenol 108-98-5
1,2,4-Trivinylcyclohexane, 98% mixture of isomers 2855-27-8
l-Bornyl acetate 5655-61-8
Cyclopentadecanone, 96% 502-72-7
1,14-Tetradecanediol, 95% (GC) 19812-64-7
3-Heptylthiophene, 97% 65016-61-7
2,4-Dimethyl-6-Hydroxypyrimidine, 99+% 6622-92-0
3-(2-Chloroethyl)-2,4(1H,3H)-Quinazoline- Dione, 99% 5081-87-8
3,5-Dimethyl-4-heptanone, 97+% 19549-84-9
N-Methyl-p-anisidine, 98% 5961-59-1
m-Toluenethiol, 97% (GC) 108-40-7
Dehydroabietylamine, tech. 1446-61-3
Zirconium atomic absorption standard solution, 1 mg/ml Zr in 5% HF 7440-67-7
DL-Bromosuccinic Acid, 96% 923-06-8
3-Chloropropiophenone, 98% 936-59-4
Hexadecyltrimethylammonium chloride, 99% 112-02-7
2,5-Dichlorothiophene, 98% 3172-52-9
Stigmastanol, Tech. 19466-47-8
3-Acetamido-4-methoxybenzenesulfinic acid, hydrate, 97%
2,4-Dinitrobenzenesulfonic Acid Sodium Salt, 98% (UV-Vis) 885-62-1
2-Methylindole, 98% 95-20-5
(R)-(+)-2-Chloropropionic acid, 98% 598-78-7
m-Phosphoric Acid, Glacial 37267-86-0
2-Ethylhexyl acrylate, 99+% stabilized with 10-20 ppm MEHQ 103-11-7
2-Chloropropane, P.A. 75-29-6
m-Xylene 108-38-3
4-Chloro-3,5-Dinitrobenzotrifluoride 98+% 393-75-9
Crotyl bromide, 85 %(gc-cap.), remainder 3-bromo-1-butene 29576-14-5
n-Dodecyl sulfide, 93% 2469-45-6
6-Nitropiperonyl Alcohol, 98% 15341-08-9
Methyl 2-methoxybenzoate, 99% 606-45-1
Magnesium, turnings and ribbons 7439-95-4
Magnesium acetate tetrahydrate 16674-78-5
Formaldoxime Trimer Hydrochloride 62479-72-5
4-Ethoxy-1,3-Phenylenediamine Dihydro-Chloride, 98% 67801-06-3
Erbium atomic absorption standard solution, 1 mg/ml Er in 2% HNO3 7440-52-0
Dithiothreitol, 99% 3483-12-3
2,5-Dichloroaniline, 99% 95-82-9
Dimesitylcyclopropenone, 99% (uv-vis) 61440-88-8
Alpha-Cyclodextrin Hydrate, 98+% (HPLC) 10016-20-3
Magnesium Bromide Hexahydrate 13446-53-2
Magnesium carbonate anhydrous 546-93-0
Silver cyanate 3315-16-0
2,3,4,6-Tetra-o-acetyl-alpha-d-glucopyranosyl azide, 95% 20369-61-7
Magnesium Chloride Hexahydrate 7791-18-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net