Search   
MSDS 
:
 (R)-(-)-2-Amino-1-butanol
CAS 
:
 5856-63-3
SYNONYMS 
:
 1-Butanol, 2-amino-, (2R)-
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 5856-63-3 |1-Butanol, 2-amino-, (2R)- | >95 | 227-476-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns. May be harmful if absorbed through the skin.
Amines have been known to cause skin irritation and sensitization.
Ingestion:
May cause severe and permanent damage to the digestive tract.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. May be
harmful if inhaled.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid and
vapor.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Ground and bond containers when transferring
material. Do not get in eyes, on skin, or on clothing. Empty
containers retain product residue, (liquid and/or vapor), and can be
dangerous. Keep container tightly closed. Discard contaminated shoes.
Do not pressurize, cut, weld, braze, solder, drill, grind, or expose
empty containers to heat, sparks or open flames. Use only with
adequate ventilation. Keep away from heat and flame. Do not breathe
vapor or mist.
Storage:
Keep away from sources of ignition. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 5856-63-3:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles and face shield.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Wear a NIOSH/MSHA or European Standard EN 149
approved full-facepiece airline respirator in the
positive pressure mode with emergency escape
provisions. Follow the OSHA respirator regulations
found in 29 CFR 1910.134 or European Standard EN 149.
Use a NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless - viscous
Odor: amine-like
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 172-174 deg C @ 760 mm Hg
Freezing/Melting Point: -2 deg C
Autoignition Temperature: Not available.
Flash Point: 82 deg C ( 179.60 deg F)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: miscible with water
Specific Gravity/Density: .940 g/ml
Molecular Formula: C4H11NO
Molecular Weight: 89.14

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids, aluminum.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 5856-63-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1-Butanol, 2-amino-, (2R)- -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.*
Hazard Class: 8
UN Number: 2735
Packing Group: III
IMO
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing Group: III
RID/ADR
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 5856-63-3: No information available.
Canada
CAS# 5856-63-3 is listed on Canada's DSL List.
CAS# 5856-63-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 5856-63-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/20/1998 Revision #3 Date: 5/26/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Poly(Ethylene Oxide) Approximate m.w.300.000 25322-68-3
Glutaric Dialdehyde, 25 wt.% Solution in Water 111-30-8
Palladium, Powder, 99.99% 7440-05-3
Palladium, Sponge, 99.9% 7440-05-3
Rhodium(II) Acetate, Dimer, Dihydrate (ca43% Rh) 29998-99-0
Rhodiumacetate, Brown, Water Soluble, ca 40% Rh 5503-41-3
N,N-Dimethylacetoacetamide, 70 Wt% Aqueous solution 2044-64-6
Sinigrin, Monohydrate, from Horseradish 3952-98-5
Lithium acetate, p.a. 546-89-4
d-2-Octanol, 99% 6169-06-8
Terephthaldehyde monodiethylacetal, 98+% stabilized with 0.1% 121-44-8
Tyramine hydrochloride, 98% 60-19-5
Methyl Vinyl Ether/Maleic Anhydride, Medium Molecular Weight 9011-16-9
Pyridine-D5, 99 Atom % D 7291-22-7
Pyridine-D5, 99 Atom % D, Contains 1 v/v% TMS 7291-22-7
Pyridine-D5, 99 Atom % D, Packaged in 1.00 ml Ampules 7291-22-7
Pyridine-D5, 100.0 Atom% D, Packaged in 0. 5 ml Ampules 7291-22-7
Plasmocorinth B 1058-92-0
Triethylenetetramine tetrahydrochloride, 97% 4961-40-4
Cyclooctene, 95% 931-88-4
N,N-Dimethylindoaniline, ca.92% Dye Content 2150-58-5
2,5-Dihydroxyphenylacetic Acid, 99% 451-13-8
Benzenesulfonyl Chloride, 96% 98-09-9
Wright stain solution in methanol buffered 67-56-1
Phenylhydrazine, 95% 100-63-0
Wright's stain (cert), 97% (uv-vis) 67-56-1
8-Hydroxyjulolidine, 98% 41175-50-2
2-Methyl-2,4-Pentanediol, 99% 107-41-5
Orcinol, 98% (uv-vis) 504-15-4
5-Bromovanillin, 98% 2973-76-4
2-Phenylbenzimidazole, 97% 716-79-0
Phenylhydrazine, 97% 100-63-0
2-Methylcyclohexanol (Mixture of Cis and Trans), 99% 583-59-5
1,1,3,3-Tetramethylurea, 99% 632-22-4
O-Toluoyl Chloride, 99% (Titr.) 933-88-0
Ethylxanthic Acid Potassium Salt 140-89-6
7-Diethylamino-3-Thenoylcoumarin 77820-11-2
Lithium, Wire, 99+%, Diameter 3.2mm 7439-93-2
Lithium (Granules, Coated with Mineral Oil) 7439-93-2
Thymine, 99% 65-71-4
Methyl stearate, 98% 112-61-8
Octacosane, 99+% (GC) 630-02-4
2,5-Dimethoxyaniline, 99+% 102-56-7
(R)-(-)-2-Amino-1-butanol 5856-63-3
Acetic-D3 Acid-D, 99.5 Atom % D 1186-52-3
Acetic-D3 Acid-D, 99.9 Atom % D (1pk=10x0.5ml) 1186-52-3
2-Mercaptobenzothiazole, 95% Contains 1-2% Oil 149-30-4
2-Mercaptobenzothiazole (Pract), 98% (Titr.) 149-30-4
4-Bromo-m-xylene, tech., 85% 583-70-0
3-(Dibutylamino)propionitrile, 97% 25726-99-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net