Search   
MSDS 
:
 Tyramine hydrochloride, 98%
CAS 
:
 60-19-5
SYNONYMS 
:
 4-(2-Aminoethyl)phenol hydrochloride; p-hydroxyphenethylamine     hydrochloride; Tyramine monochloride
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 60-19-5 |TYRAMINE HYDROCHLORIDE | 98 | 200-462-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation. Causes redness and pain.
Skin:
May cause skin irritation. Causes redness and pain.
Ingestion:
May cause irritation of the digestive tract. May cause
gastrointestinal irritation with nausea, vomiting and diarrhea. The
toxicological properties of this substance have not been fully
investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
breathing dust, vapor, mist, or gas. Avoid contact with skin and
eyes. Avoid ingestion and inhalation.
Storage:
Do not store in direct sunlight. Store in a tightly closed
container. Store in a dry area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 60-19-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: slightly beige
Odor: Practically odorless
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 269 deg C @ 760.00mm Hg
Freezing/Melting Point: 271 - 274 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: moderately soluble in water (10%)
Specific Gravity/Density:
Molecular Formula: C8H11NO.HCl
Molecular Weight: 173.65

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, light, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, acid chlorides, acid anhydrides
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 60-19-5: SJ6050000
LD50/LC50:
Not available.
Carcinogenicity:
TYRAMINE HYDROCHLORIDE -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 60-19-5: 1
Canada
CAS# 60-19-5 is listed on Canada's DSL List.
CAS# 60-19-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 60-19-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Poly(Ethylene Oxide) Approximate m.w.300.000 25322-68-3
Glutaric Dialdehyde, 25 wt.% Solution in Water 111-30-8
Palladium, Powder, 99.99% 7440-05-3
Palladium, Sponge, 99.9% 7440-05-3
Rhodium(II) Acetate, Dimer, Dihydrate (ca43% Rh) 29998-99-0
Rhodiumacetate, Brown, Water Soluble, ca 40% Rh 5503-41-3
N,N-Dimethylacetoacetamide, 70 Wt% Aqueous solution 2044-64-6
Sinigrin, Monohydrate, from Horseradish 3952-98-5
Lithium acetate, p.a. 546-89-4
d-2-Octanol, 99% 6169-06-8
Terephthaldehyde monodiethylacetal, 98+% stabilized with 0.1% 121-44-8
Tyramine hydrochloride, 98% 60-19-5
Methyl Vinyl Ether/Maleic Anhydride, Medium Molecular Weight 9011-16-9
Pyridine-D5, 99 Atom % D 7291-22-7
Pyridine-D5, 99 Atom % D, Contains 1 v/v% TMS 7291-22-7
Pyridine-D5, 99 Atom % D, Packaged in 1.00 ml Ampules 7291-22-7
Pyridine-D5, 100.0 Atom% D, Packaged in 0. 5 ml Ampules 7291-22-7
Plasmocorinth B 1058-92-0
Triethylenetetramine tetrahydrochloride, 97% 4961-40-4
Cyclooctene, 95% 931-88-4
N,N-Dimethylindoaniline, ca.92% Dye Content 2150-58-5
2,5-Dihydroxyphenylacetic Acid, 99% 451-13-8
Benzenesulfonyl Chloride, 96% 98-09-9
Wright stain solution in methanol buffered 67-56-1
Phenylhydrazine, 95% 100-63-0
Wright's stain (cert), 97% (uv-vis) 67-56-1
8-Hydroxyjulolidine, 98% 41175-50-2
2-Methyl-2,4-Pentanediol, 99% 107-41-5
Orcinol, 98% (uv-vis) 504-15-4
5-Bromovanillin, 98% 2973-76-4
2-Phenylbenzimidazole, 97% 716-79-0
Phenylhydrazine, 97% 100-63-0
2-Methylcyclohexanol (Mixture of Cis and Trans), 99% 583-59-5
1,1,3,3-Tetramethylurea, 99% 632-22-4
O-Toluoyl Chloride, 99% (Titr.) 933-88-0
Ethylxanthic Acid Potassium Salt 140-89-6
7-Diethylamino-3-Thenoylcoumarin 77820-11-2
Lithium, Wire, 99+%, Diameter 3.2mm 7439-93-2
Lithium (Granules, Coated with Mineral Oil) 7439-93-2
Thymine, 99% 65-71-4
Methyl stearate, 98% 112-61-8
Octacosane, 99+% (GC) 630-02-4
2,5-Dimethoxyaniline, 99+% 102-56-7
(R)-(-)-2-Amino-1-butanol 5856-63-3
Acetic-D3 Acid-D, 99.5 Atom % D 1186-52-3
Acetic-D3 Acid-D, 99.9 Atom % D (1pk=10x0.5ml) 1186-52-3
2-Mercaptobenzothiazole, 95% Contains 1-2% Oil 149-30-4
2-Mercaptobenzothiazole (Pract), 98% (Titr.) 149-30-4
4-Bromo-m-xylene, tech., 85% 583-70-0
3-(Dibutylamino)propionitrile, 97% 25726-99-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net