**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 933-88-0 |o-Toluoyl chloride | 99 | 213-273-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.Corrosive.Lachrymator (substance
which increases the flow of tears).
Potential Health Effects
Eye:
Lachrymator (substance which increases the flow of tears). Causes
eye irritation and burns.
Skin:
Causes skin irritation and burns.
Ingestion:
May cause severe and permanent damage to the digestive tract. May
cause burns to the gastrointestinal tract.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract.
Chronic:
Chronic inhalation may cause spasm, inflammation and edema of the
larynx and bronchi, chemical pneumonitis, and pulmonary edema.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Vapors may be heavier than air. They can spread along the ground and
collect in low or confined areas. Containers may explode when heated.
Extinguishing Media:
Do NOT use water directly on fire. Use water spray to cool
fire-exposed containers. Use foam, dry chemical, or carbon dioxide.
Do NOT get water inside containers.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Provide ventilation. Do not get water inside
containers.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Empty containers retain product residue, (liquid and/or vapor), and
can be dangerous. Keep container tightly closed. Keep away from
heat, sparks and flame. Do not get on skin or in eyes. Do not ingest
or inhale. Do not allow contact with water. Discard contaminated
shoes. Do not pressurize, cut, weld, braze, solder, drill, grind, or
expose empty containers to heat, sparks or open flames. Keep from
contact with moist air and steam.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Keep container closed when not in use. Store in a tightly
closed container. Store in a cool, dry, well-ventilated area away
from incompatible substances. Corrosives area. Store protected from
moisture.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 933-88-0:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Clear liquid
Color: light yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 88.0 - 90.0 deg C @ 12.00mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 76 deg C ( 168.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: decomposes
Specific Gravity/Density: 1.1850g/cm3
Molecular Formula: C8H7ClO
Molecular Weight: 154.60
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures. Moisture sensitive.
Conditions to Avoid:
Incompatible materials, ignition sources, moisture, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases, alcohols, water.
Hazardous Decomposition Products:
Hydrogen chloride, phosgene, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 933-88-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
o-Toluoyl chloride -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE LIQUID, N.O.S.*
Hazard Class: 8
UN Number: 1760
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 933-88-0: 1
Canada
CAS# 933-88-0 is listed on Canada's NDSL List.
CAS# 933-88-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 933-88-0 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 2/24/1999 Revision #3 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Poly(Ethylene Oxide) Approximate m.w.300.000
| 25322-68-3 |
|
Glutaric Dialdehyde, 25 wt.% Solution in Water
| 111-30-8 |
|
Palladium, Powder, 99.99%
| 7440-05-3 |
|
Palladium, Sponge, 99.9%
| 7440-05-3 |
|
Rhodium(II) Acetate, Dimer, Dihydrate (ca43% Rh)
| 29998-99-0 |
|
Rhodiumacetate, Brown, Water Soluble, ca 40% Rh
| 5503-41-3 |
|
N,N-Dimethylacetoacetamide, 70 Wt% Aqueous solution
| 2044-64-6 |
|
Sinigrin, Monohydrate, from Horseradish
| 3952-98-5 |
|
Lithium acetate, p.a.
| 546-89-4 |
|
d-2-Octanol, 99%
| 6169-06-8 |
|
Terephthaldehyde monodiethylacetal, 98+% stabilized with 0.1%
| 121-44-8 |
|
Tyramine hydrochloride, 98%
| 60-19-5 |
|
Methyl Vinyl Ether/Maleic Anhydride, Medium Molecular Weight
| 9011-16-9 |
|
Pyridine-D5, 99 Atom % D
| 7291-22-7 |
|
Pyridine-D5, 99 Atom % D, Contains 1 v/v% TMS
| 7291-22-7 |
|
Pyridine-D5, 99 Atom % D, Packaged in 1.00 ml Ampules
| 7291-22-7 |
|
Pyridine-D5, 100.0 Atom% D, Packaged in 0. 5 ml Ampules
| 7291-22-7 |
|
Plasmocorinth B
| 1058-92-0 |
|
Triethylenetetramine tetrahydrochloride, 97%
| 4961-40-4 |
|
Cyclooctene, 95%
| 931-88-4 |
|
N,N-Dimethylindoaniline, ca.92% Dye Content
| 2150-58-5 |
|
2,5-Dihydroxyphenylacetic Acid, 99%
| 451-13-8 |
|
Benzenesulfonyl Chloride, 96%
| 98-09-9 |
|
Wright stain solution in methanol buffered
| 67-56-1 |
|
Phenylhydrazine, 95%
| 100-63-0 |
|
Wright's stain (cert), 97% (uv-vis)
| 67-56-1 |
|
8-Hydroxyjulolidine, 98%
| 41175-50-2 |
|
2-Methyl-2,4-Pentanediol, 99%
| 107-41-5 |
|
Orcinol, 98% (uv-vis)
| 504-15-4 |
|
5-Bromovanillin, 98%
| 2973-76-4 |
|
2-Phenylbenzimidazole, 97%
| 716-79-0 |
|
Phenylhydrazine, 97%
| 100-63-0 |
|
2-Methylcyclohexanol (Mixture of Cis and Trans), 99%
| 583-59-5 |
|
1,1,3,3-Tetramethylurea, 99%
| 632-22-4 |
|
O-Toluoyl Chloride, 99% (Titr.)
| 933-88-0 |
|
Ethylxanthic Acid Potassium Salt
| 140-89-6 |
|
7-Diethylamino-3-Thenoylcoumarin
| 77820-11-2 |
|
Lithium, Wire, 99+%, Diameter 3.2mm
| 7439-93-2 |
|
Lithium (Granules, Coated with Mineral Oil)
| 7439-93-2 |
|
Thymine, 99%
| 65-71-4 |
|
Methyl stearate, 98%
| 112-61-8 |
|
Octacosane, 99+% (GC)
| 630-02-4 |
|
2,5-Dimethoxyaniline, 99+%
| 102-56-7 |
|
(R)-(-)-2-Amino-1-butanol
| 5856-63-3 |
|
Acetic-D3 Acid-D, 99.5 Atom % D
| 1186-52-3 |
|
Acetic-D3 Acid-D, 99.9 Atom % D (1pk=10x0.5ml)
| 1186-52-3 |
|
2-Mercaptobenzothiazole, 95% Contains 1-2% Oil
| 149-30-4 |
|
2-Mercaptobenzothiazole (Pract), 98% (Titr.)
| 149-30-4 |
|
4-Bromo-m-xylene, tech., 85%
| 583-70-0 |
|
3-(Dibutylamino)propionitrile, 97%
| 25726-99-2 |
|
|