Search   
MSDS 
:
 2-Hydroxy-1-naphthaldehyde, tech., contains ca 15% water
CAS 
:
 708-06-5
SYNONYMS 
:
 1-Naphthalenecarboxaldehyde, 2-hydroxy-.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 708-06-5 |2-Hydroxy-1-naphthaldehyde | 85 | 211-902-0 |
|----------------|--------------------------------------|----------|-----------|
| 7732-18-5 |Water | 15 | 231-791-2 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: N
Risk Phrases: 50/53

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Very toxic to aquatic organisms, may cause long-term adverse effects
in the aquatic environment.The toxicological properties of this
material have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 708-06-5:

CAS# 7732-18-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: yellow - beige - brown
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 192 deg C @ 27.00mm Hg
Freezing/Melting Point: 78 deg C
Autoignition Temperature: > 400 deg C (> 752.00 deg F)
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: >400 deg C
Solubility in water: 40 mg/l
Specific Gravity/Density:
Molecular Formula: C11H8O2
Molecular Weight: 172.18

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 708-06-5: QJ0300000
CAS# 7732-18-5: ZC0110000
LD50/LC50:
CAS# 708-06-5: Oral, rat: LD50 = >5 gm/kg.
CAS# 7732-18-5: Oral, rat: LD50 = >90 mL/kg.
Carcinogenicity:
2-Hydroxy-1-naphthaldehyde -
Not listed by ACGIH, IARC, or NTP.
Water -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: N
Risk Phrases:
R 50/53 Very toxic to aquatic organisms, may cause
long-term adverse effects in the aquatic environment.
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
S 57 Use appropriate containment to avoid
environmental contamination.
S 60 This material and its container must be
disposed of as hazardous waste.
WGK (Water Danger/Protection)
CAS# 708-06-5: 2
CAS# 7732-18-5: No information available.
Canada
CAS# 708-06-5 is listed on Canada's NDSL List.
CAS# 7732-18-5 is listed on Canada's DSL List.
CAS# 708-06-5 is not listed on Canada's Ingredient Disclosure List.
CAS# 7732-18-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 708-06-5 is listed on the TSCA inventory.
CAS# 7732-18-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
MSDS Creation Date: 9/02/1997 Revision #5 Date: 10/21/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-(4-Chlorophenyl)-4,4-Bis(methylthio)- 0-00-1
L-(-)-Galactose, 99% 15572-79-9
2-Iodobutane, 99% 513-48-4
3,5-Dimethyl-1,2-Cyclopentanedione, 97% 21834-98-0
3-Nitrobenzenesulfonamide, 98% 121-52-8
1-(2-Amino-5-Chlorobenzoyl)-1-Methyl-Hydrazine, 98% 0-00-1
Tetramethylrhodamine-5(6)Isothiocyanate 80724-20-5
Biphenylene, 99+% (GC) 259-79-0
Tetramethyltin, 99% 594-27-4
Ethyl dl-mandelate, 97% 4358-88-7
Propionic acid 79-09-4
(Trifluoromethyl)trimethylsilane, 96% 81290-20-2
3-Methyl-2-Butanone, 98% 563-80-4
(+)-N-Tosyl-L-Glutamic Acid, 98% 0-01-1
1-Propanol 99+% 71-23-8
1,4-Difluorobenzene, 99+% 540-36-3
3-Bromoanisole, 99+% 2398-37-0
1,2,4,5-Tetrafluorobenzene, 98% 327-54-8
Propylene Carbonate 108-32-7
(+)-1,6-Bis(2-Chlorophenyl)-1,6-Diphenyl- 2,4-Hexadiyne-1,6-Diol, 86436-19-3
Lithium amide, 95% 7782-89-0
Propylene glycol 57-55-6
Aluminum-nickel, Raney-type alloy, powder, Al-Ni 50/50 12635-29-9
Hexahydro-1h-azepine-1-acetonitrile, tech., ca.90% 54714-50-0
Ethyl 2-chloroacetoacetate (pract), 95% (gc) 609-15-4
Bis(Diphenylphosphino)Methane, 98% 2071-20-7
4-Acetylbenzenesulfonic Acid, Sodium Salt, 98% 61827-67-6
N-Benzylbenzamide, 99% 1485-70-7
p-Toluidine hydrochloride, 99% 540-23-8
Propylene oxide 75-56-9
Cyclohexanol-D12, 98+ Atom % D 66522-78-9
L(-)-carnitine hydrochloride, 99% 6645-46-1
6-Hydroxy-2,4,5-Triaminopyrimidine Sulfate 1603-02-7
2-Hydroxy-1-naphthaldehyde, tech., contains ca 15% water 708-06-5
5-Phenyl-2-(2-propynylamino)-2-oxazolin-4- one, 97+% 32962-46-2
4(3H)-Pyrimidone, 98+% 51953-17-4
Pyridine-N-oxide, 98% 694-59-7
2-Bromoterephthalic Acid, 99% 586-35-6
Serotonin Creatinine Sulfate Monohydrate, 99% 61-47-2
2-Methyl-6-nitroaniline, 99% 570-24-1
3-Fluoro-4-methylbenzoic acid, 97% 350-28-7
Pyridine 110-86-1
4,5-Dihydroxy-3-(p-Sulfophenylazo)-2,7- Naphthalenedisulfonic Acid 23647-14-5
Pyrogallol 87-66-1
N-Methylnicotinamide, 98% 114-33-0
Cesium Acetate, 99% 3396-11-0
1-Phenylcyclopentanecarboxylic Acid, 98% 77-55-4
Quinoline 91-22-5
p-Quinone 106-51-4
1,2,3-Benzenetricarboxylic acid hydrate 96% 36362-97-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net