Search   
MSDS 
:
 Acetic acid-d, 98 atom % d
CAS 
:
 758-12-3
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 758-12-3 |Acetic acid-d, 98 atom % D | 98 % | 212-059-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 10 35

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Causes severe burns.Corrosive.Highly
flammable.Hygroscopic (absorbs moisture from the air).

Potential Health Effects
Eye:
Causes severe eye burns.
Skin:
Causes severe burns with delayed tissue destruction.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
severe digestive tract burns with abdominal pain, vomiting, and
possible death.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately. SPEED IS ESSENTIAL.
A DOCTOR MUST BE NOTIFIED AT ONCE.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use alcohol foam, carbon dioxide, or water spray when fighting fires
involving this material.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Wash hands before eating. Use only
in a well-ventilated area. Do not get on skin or in eyes. Do not
ingest or inhale.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a cool, dry place. Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 758-12-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 116 - 117 deg C @ 760.00mm Hg
Freezing/Melting Point: 15 - 16 deg C
Autoignition Temperature: Not available.
Flash Point: 40 deg C ( 104.00 deg F)
Explosion Limits, lower: 4.00 vol %
Explosion Limits, upper: 17.00 vol %
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.0590g/cm3
Molecular Formula: C2H3DO2
Molecular Weight: 61.06

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, moisture.
Incompatibilities with Other Materials:
Strong oxidants and bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 758-12-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Acetic acid-d, 98 atom % D -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ACETIC ACID, GLACIAL
Hazard Class: 8 (3)
UN Number: 2789
Packing Group: II
IMO
Shipping Name: ACETIC ACID, GLACIAL
Hazard Class: 8 (3)
UN Number: 2789
Packing Group: II
RID/ADR
Shipping Name: ACETIC ACID, GLACIAL
Hazard Class: 8
UN Number: 2789
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 10 Flammable.
R 35 Causes severe burns.
Safety Phrases:
S 23 Do not inhale gas/fumes/vapour/spray.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 758-12-3: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 758-12-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 758-12-3 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Ethyl delta-bromo-beta,beta-dimethyl levulinate, 96% 197234-17-6
1-Cyclohexyl-3-(2-Morpholinoethyl)Carbodiimide 2491-17-0
3-Chloroanisole, 99% 2845-89-8
2-Acetamidoacrylic acid, 99+ % 5429-56-1
Bianthrone 434-85-5
1-(4-Chlorophenyl)-1-cyclopentanecarbonyl chloride, 97% 71501-44-5
Acetic acid-d, 98 atom % d 758-12-3
n-Phenyl-1-naphthylamine, 98% 90-30-2
5-Methyl-2-Nitrobenzyl Chloride 66424-91-7
2-Hydroxy-4-Methoxybenzophenone, 98% 131-57-7
Myristyltrimethylammonium bromide, 99% (ti tr.) 1119-97-7
Cyclododecanone, 99+% 830-13-7
4,4'-Biphenol, 97% 92-88-6
Diphenylacetylene (Tolan), 99% 501-65-5
Dicyclohexyl Phenyl Phosphine 6476-37-5
(+/-)-2-azabicyclo2.2.1hept-5-en-3-one 98% (hplc) 49805-30-3
Iron (III) Sulfate Tetrahydrate, Reagent (Powder), 97% (Titr.) 15244-10-7
Phenyl Isocyanate (Pract), 98% (gc) 103-71-9
3,5-Dichlorosalicylaldehyde 90-60-8
1,5-Dicyanopentane, 98% 646-20-8
2-Pyridinecarboxaldehyde, 99% 1121-60-4
Lithium Iodide, Anhydrous, 99% 10377-51-2
Alginic Acid, Sodium Salt 9005-38-3
(2R,3R)-1-Carboxy-4,5-dichloro-2,3-dihydroxycyclohexa-4,6-diene 205587-32-2
4-Chloro-3-Nitrobenzoic Acid, 99.5% 96-99-1
Barium Titanate(iv), 99% 12047-27-7
2,3-Dichloro-5,6 Dicyano-1,4-Benzoquinone, 98% 84-58-2
Triethanolamine hydrochloride 637-39-8
2,6-Diisopropylaniline, 95% 24544-04-5
3-Quinuclidinol, 99% 1619-34-7
n,n-Dimethylformamide diethyl acetal, 98% 1188-33-6
(R)-4-Benzyl-2-oxazolidinone, 99%, (>99% e.e.) 102029-44-7
2-Ethylimidazole, 98% 1072-62-4
All-Trans-Retinoic Acid 97% 302-79-4
Bis(2-Ethylhexyl) Terephthalate, 98.5% (GC) 6422-86-2
D(+)-10-camphorsulfonic acid 99% 3144-16-9
1,6-Hexanedithiol, 97% 1191-43-1
Ferric benzoylacetonate 14323-17-2
3-Chlorophenyl isothiocyanate 2392-68-9
1-Bromodecane, 98% 112-29-8
Didodecyldimethylammonium bromide, 99% 3282-73-3
1,4-Cyclohexadiene, 97% 628-41-1
Dl-3-(alpha-acetonyl-4'-chlorobenzyl)- 4-hydroxycoumarin, 98% 81-82-3
3-Nitrophenol, 99% 554-84-7
O,O-Dimethyl-1-Hydroxy-2,2,2-Trichloroethylphosphonate, 98% 52-68-6
Allyl Chloride 107-05-1
1,2,3,4-Tetrahydroacridine-9-Carboxylic Acid Dihydrate 38186-54-8
1-Bromododecane, 98% 143-15-7
Ethyl 2,4-dioxovalerate, 98% 615-79-2
Arsenazo I, Indicator Grade 520-10-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net