Search   
MSDS 
:
 Alginic Acid, Sodium Salt
CAS 
:
 9005-38-3
SYNONYMS 
:
 Sodium Alginate; Alginate Acid Sodium Salt.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 9005-38-3 |Algenic acid, sodium salt | ca 100 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. Low hazard for usual industrial handling.
Inhalation:
May cause respiratory tract irritation. Low hazard for usual
industrial handling.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air. Use extinguishing media appropriate to
the surrounding fire. Substance is noncombustible.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Substance is noncombustible; use agent most
appropriate to extinguish surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Flush spill area with water. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Wash hands before eating. Use only
in a well-ventilated area. Minimize dust generation and accumulation.
Avoid contact with skin and eyes. Avoid ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local explosion-proof ventilation to keep
airborne levels to acceptable levels.
Exposure Limits
CAS# 9005-38-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white to light cream
Odor: Odorless.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: > 300 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Slightly soluble.
Specific Gravity/Density: Not available.
Molecular Formula: Unknown
Molecular Weight: Unknown

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, dust generation, excess
heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, bases and acids.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 9005-38-3: AZ5820000
LD50/LC50:
CAS# 9005-38-3: Oral, rat: LD50 = >5 gm/kg.
Carcinogenicity:
Algenic acid, sodium salt -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 9005-38-3: 0
Canada
CAS# 9005-38-3 is listed on Canada's DSL List.
CAS# 9005-38-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 9005-38-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/09/1998 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Ethyl delta-bromo-beta,beta-dimethyl levulinate, 96% 197234-17-6
1-Cyclohexyl-3-(2-Morpholinoethyl)Carbodiimide 2491-17-0
3-Chloroanisole, 99% 2845-89-8
2-Acetamidoacrylic acid, 99+ % 5429-56-1
Bianthrone 434-85-5
1-(4-Chlorophenyl)-1-cyclopentanecarbonyl chloride, 97% 71501-44-5
Acetic acid-d, 98 atom % d 758-12-3
n-Phenyl-1-naphthylamine, 98% 90-30-2
5-Methyl-2-Nitrobenzyl Chloride 66424-91-7
2-Hydroxy-4-Methoxybenzophenone, 98% 131-57-7
Myristyltrimethylammonium bromide, 99% (ti tr.) 1119-97-7
Cyclododecanone, 99+% 830-13-7
4,4'-Biphenol, 97% 92-88-6
Diphenylacetylene (Tolan), 99% 501-65-5
Dicyclohexyl Phenyl Phosphine 6476-37-5
(+/-)-2-azabicyclo2.2.1hept-5-en-3-one 98% (hplc) 49805-30-3
Iron (III) Sulfate Tetrahydrate, Reagent (Powder), 97% (Titr.) 15244-10-7
Phenyl Isocyanate (Pract), 98% (gc) 103-71-9
3,5-Dichlorosalicylaldehyde 90-60-8
1,5-Dicyanopentane, 98% 646-20-8
2-Pyridinecarboxaldehyde, 99% 1121-60-4
Lithium Iodide, Anhydrous, 99% 10377-51-2
Alginic Acid, Sodium Salt 9005-38-3
(2R,3R)-1-Carboxy-4,5-dichloro-2,3-dihydroxycyclohexa-4,6-diene 205587-32-2
4-Chloro-3-Nitrobenzoic Acid, 99.5% 96-99-1
Barium Titanate(iv), 99% 12047-27-7
2,3-Dichloro-5,6 Dicyano-1,4-Benzoquinone, 98% 84-58-2
Triethanolamine hydrochloride 637-39-8
2,6-Diisopropylaniline, 95% 24544-04-5
3-Quinuclidinol, 99% 1619-34-7
n,n-Dimethylformamide diethyl acetal, 98% 1188-33-6
(R)-4-Benzyl-2-oxazolidinone, 99%, (>99% e.e.) 102029-44-7
2-Ethylimidazole, 98% 1072-62-4
All-Trans-Retinoic Acid 97% 302-79-4
Bis(2-Ethylhexyl) Terephthalate, 98.5% (GC) 6422-86-2
D(+)-10-camphorsulfonic acid 99% 3144-16-9
1,6-Hexanedithiol, 97% 1191-43-1
Ferric benzoylacetonate 14323-17-2
3-Chlorophenyl isothiocyanate 2392-68-9
1-Bromodecane, 98% 112-29-8
Didodecyldimethylammonium bromide, 99% 3282-73-3
1,4-Cyclohexadiene, 97% 628-41-1
Dl-3-(alpha-acetonyl-4'-chlorobenzyl)- 4-hydroxycoumarin, 98% 81-82-3
3-Nitrophenol, 99% 554-84-7
O,O-Dimethyl-1-Hydroxy-2,2,2-Trichloroethylphosphonate, 98% 52-68-6
Allyl Chloride 107-05-1
1,2,3,4-Tetrahydroacridine-9-Carboxylic Acid Dihydrate 38186-54-8
1-Bromododecane, 98% 143-15-7
Ethyl 2,4-dioxovalerate, 98% 615-79-2
Arsenazo I, Indicator Grade 520-10-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net