Search   
MSDS 
:
 Benzenesulfonic acid, tech., 90%
CAS 
:
 98-11-3
SYNONYMS 
:
 Benzenesulphonic acid; Besylic acid; Phenylsulfonic acid.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 98-11-3 |Benzenesulfonic acid | 90 | 202-638-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 22 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Causes burns.

Potential Health Effects
Eye:
Causes severe eye irritation and burns.
Skin:
Causes severe skin irritation and burns.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May be harmful if swallowed.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract. Causes irritation of mucous
membrane.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse. Discard contaminated clothing in a manner
which limits further exposure. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Contact
with metals may evolve flammable hydrogen gas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, or water spray.
For large fires, use dry chemical, carbon dioxide, alcohol-resistant
foam, or water spray. Cool containers with flooding quantities of
water until well after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Keep container tightly closed. Do
not get on skin or in eyes. Do not ingest or inhale. Use with
adequate ventilation. Discard contaminated shoes.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 98-11-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Needles
Color: light brown
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 45 - 50 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: Soluble.
Specific Gravity/Density:
Molecular Formula: C6H6O3S
Molecular Weight: 158.17

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 98-11-3: DB4200000
LD50/LC50:
CAS# 98-11-3: Draize test, rabbit, eye: 250 ug/24H Severe; Draize
test, rabbit, skin: 2 mg/24H Severe; Oral, rat: LD50 = 890 uL/kg.
Carcinogenicity:
Benzenesulfonic acid -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ARYLSULPHONIC ACIDS, SOLID
Hazard Class: 8
UN Number: 2585
Packing Group: III
IMO
Shipping Name: ARYLSULPHONIC ACIDS, SOLID
Hazard Class: 8
UN Number: 2585
Packing Group: III
RID/ADR
Shipping Name: ARYLSULPHONIC ACIDS, SOLID
Hazard Class: 8
UN Number: 2585
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 22 Harmful if swallowed.
R 34 Causes burns.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 98-11-3: 2
Canada
CAS# 98-11-3 is listed on Canada's DSL List.
CAS# 98-11-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 98-11-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 10/29/1998 Revision #3 Date: 11/21/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Hydroxybenzophenone, 99+% 1137-42-4
Chlorobenzene, 99+% 108-90-7
Chlorobenzene, Reagent ACS, 99.5% (GC) 108-90-7
Chloroform, preserved with 0.75% Ethanol 64-17-5
Chloroform, Reagent ACS, 99.8% (GC) 67-66-3
2-Amino-6-Methoxybenzothiazole, Tech. 1747-60-0
Cholesterol, 95% 57-88-5
Choline Chloride, 99% 67-48-1
Chromium(VI) oxide, flakes, 99+% 1333-82-0
N,N-Dimethylindoaniline (Pract), 78% (UV-Vis) 2150-58-5
Chromium(VI) oxide, reagent ACS, 98+% 1333-82-0
Methylene violet (bernthsen), high purity biological stain 2516-05-4
3-Dimethylaminopropylamine, 99% 109-55-7
Cobalt (II) Nitrate Hexahydrate, 99% 10026-22-9
Cobalt(II) Nitrate, Hexahydrate, Reagent ACS (Crystals) 10026-22-9
D(+)-trehalose dihydrate min. 99% (hplc) 6138-23-4
Cobalt(II) chloride hexahydrate, p.a. 7791-13-1
Cobalt(II) chloride, hexahydrate, reagent ACS 7791-13-1
Copper, 99%, -45 Micron Powder 7440-50-8
Cupferron, P.A. 135-20-6
Copper (II) Oxide, 99.999% 1317-38-0
Copper (II) Oxide, P.A. 1317-38-0
Copper (II) Oxide, Black, Reagent ACS (Powder) 1317-38-0
Copper(II) sulfate, anhydrous, p.a. 7758-98-7
Beta-Apo-Oxytetracycline,"Can be Used as Secondary Standard" 18751-99-0
Tolylene-2,4-Diisocyanate, Tech., 80% 584-84-9
Copper(II) sulfate pentahydrate, p.a. 7758-98-7
Copper(II) sulfate pentahydrate, reagent ACS 7758-98-7
N,N'-Di-N-Butylthiourea, 99% 109-46-6
5-Aminosalicylic Acid, 95% 89-57-6
Butyl Benzoate, 98% 136-60-7
Dl-sec-phenethyl alcohol, 99+% 98-85-1
D-(-)-Fructose, 98% 57-48-7
D-Sorbitol, 97% 50-70-4
Decahydronaphthalene, mixture of cis and trans, 98% 91-17-8
2,6-Di-tert-butyl-4-methylphenol, 99% 128-37-0
2-Aminothiophenol, 98% (GC) 137-07-5
2-Methyl-beta-naphthothiazole, 98% 2682-45-3
Di-n-butylamine 99% 111-92-2
tert-Butyl bromoacetate, 99% 5292-43-3
1,4-Dimethoxybenzene, 99+% 150-78-7
5-Chloro-2-Methylbenzoxazole, 99+% (GC) 19219-99-9
Ammonium oxalate, monohydrate, p.a. 1113-38-8
L-Lactic Acid, 20 Wt. % Solution in Water 79-33-4
Benzenesulfonic acid, tech., 90% 98-11-3
Molybdic acid p.a. 7782-91-4
Poly(phenylene sulfide) nominal m.w. 10000 ,powder 9016-75-5
2-Pyrrolidinone, 98% 616-45-5
Ethyl Caprate, 99+% 110-38-3
2,4-Dihydroxybenzoic acid, 97% 89-86-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net