Search   
MSDS 
:
 Dl-sec-phenethyl alcohol, 99+%
CAS 
:
 98-85-1
SYNONYMS 
:
 ??1-Methylbenzyl alcohol
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 98-85-1 |DL-sec-Phenethyl alcohol | >99.0 | 202-707-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21/22 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes severe eye irritation.
Skin:
Causes skin irritation.
Ingestion:
Harmful if swallowed. May cause irritation of the digestive tract.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Use water spray to keep fire-exposed containers
cool. Combustible liquid. Containers may explode when heated.
Extinguishing Media:
Use water spray to cool fire-exposed containers. For small fires,
use dry chemical, carbon dioxide, or water spray. For large fires,
use dry chemical, carbon dioxide, alcohol-resistant foam, or water
spray. Cool containers with flooding quantities of water until well
after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Empty containers retain
product residue, (liquid and/or vapor), and can be dangerous. Keep
container tightly closed. Keep away from heat, sparks and flame. Do
not ingest or inhale. Do not pressurize, cut, weld, braze, solder,
drill, grind, or expose empty containers to heat, sparks or open
flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Always use
a NIOSH or European Standard EN 149 approved
respirator when necessary.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: hyacinth-like
pH: Not available.
Vapor Pressure: 0.1 mm Hg @20C
Viscosity: Not available.
Boiling Point: 204 deg C @ 745.00mm Hg
Freezing/Melting Point: 21.4 deg C
Autoignition Temperature: 480 deg C ( 896.00 deg F)
Flash Point: 185-189 deg C
Explosion Limits, lower: 1.80 vol %
Explosion Limits, upper: 4.90 vol %
Decomposition Temperature:
Solubility in water: soluble in alcohol and glycerol
Specific Gravity/Density: 1.0130g/cm3
Molecular Formula: C8H10O
Molecular Weight: 122.17

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 98-85-1: DO9275000
LD50/LC50:
CAS# 98-85-1: Dermal, guinea pig: LD50 = >15 mL/kg; Draize test,
rabbit, eye: 2 mg Severe; Draize test, rabbit, skin: 500 mg/24H
Moderate; Oral, mouse: LD50 = 558 mg/kg; Oral, rat: LD50 = 400 mg/kg.
Carcinogenicity:
DL-sec-Phenethyl alcohol -
Not listed by ACGIH, IARC, or NTP.
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ALPHA-METHYLBENZYL ALCOHOL
Hazard Class: 6.1
UN Number: 2937
Packing Group: III
IMO
Shipping Name: ALPHA-METHYLBENZYL ALCOHOL
Hazard Class: 6.1
UN Number: 2937
Packing Group: III
RID/ADR
Shipping Name: ALPHA-METHYLBENZYL ALCOHOL
Hazard Class: 6.1
UN Number: 2937
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 98-85-1: 1
United Kingdom Occupational Exposure Limits

United Kingdom Maximum Exposure Limits

Canada
CAS# 98-85-1 is listed on Canada's DSL List.
CAS# 98-85-1 is listed on Canada's Ingredient Disclosure List.
Exposure Limits
US FEDERAL
TSCA
CAS# 98-85-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/10/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Hydroxybenzophenone, 99+% 1137-42-4
Chlorobenzene, 99+% 108-90-7
Chlorobenzene, Reagent ACS, 99.5% (GC) 108-90-7
Chloroform, preserved with 0.75% Ethanol 64-17-5
Chloroform, Reagent ACS, 99.8% (GC) 67-66-3
2-Amino-6-Methoxybenzothiazole, Tech. 1747-60-0
Cholesterol, 95% 57-88-5
Choline Chloride, 99% 67-48-1
Chromium(VI) oxide, flakes, 99+% 1333-82-0
N,N-Dimethylindoaniline (Pract), 78% (UV-Vis) 2150-58-5
Chromium(VI) oxide, reagent ACS, 98+% 1333-82-0
Methylene violet (bernthsen), high purity biological stain 2516-05-4
3-Dimethylaminopropylamine, 99% 109-55-7
Cobalt (II) Nitrate Hexahydrate, 99% 10026-22-9
Cobalt(II) Nitrate, Hexahydrate, Reagent ACS (Crystals) 10026-22-9
D(+)-trehalose dihydrate min. 99% (hplc) 6138-23-4
Cobalt(II) chloride hexahydrate, p.a. 7791-13-1
Cobalt(II) chloride, hexahydrate, reagent ACS 7791-13-1
Copper, 99%, -45 Micron Powder 7440-50-8
Cupferron, P.A. 135-20-6
Copper (II) Oxide, 99.999% 1317-38-0
Copper (II) Oxide, P.A. 1317-38-0
Copper (II) Oxide, Black, Reagent ACS (Powder) 1317-38-0
Copper(II) sulfate, anhydrous, p.a. 7758-98-7
Beta-Apo-Oxytetracycline,"Can be Used as Secondary Standard" 18751-99-0
Tolylene-2,4-Diisocyanate, Tech., 80% 584-84-9
Copper(II) sulfate pentahydrate, p.a. 7758-98-7
Copper(II) sulfate pentahydrate, reagent ACS 7758-98-7
N,N'-Di-N-Butylthiourea, 99% 109-46-6
5-Aminosalicylic Acid, 95% 89-57-6
Butyl Benzoate, 98% 136-60-7
Dl-sec-phenethyl alcohol, 99+% 98-85-1
D-(-)-Fructose, 98% 57-48-7
D-Sorbitol, 97% 50-70-4
Decahydronaphthalene, mixture of cis and trans, 98% 91-17-8
2,6-Di-tert-butyl-4-methylphenol, 99% 128-37-0
2-Aminothiophenol, 98% (GC) 137-07-5
2-Methyl-beta-naphthothiazole, 98% 2682-45-3
Di-n-butylamine 99% 111-92-2
tert-Butyl bromoacetate, 99% 5292-43-3
1,4-Dimethoxybenzene, 99+% 150-78-7
5-Chloro-2-Methylbenzoxazole, 99+% (GC) 19219-99-9
Ammonium oxalate, monohydrate, p.a. 1113-38-8
L-Lactic Acid, 20 Wt. % Solution in Water 79-33-4
Benzenesulfonic acid, tech., 90% 98-11-3
Molybdic acid p.a. 7782-91-4
Poly(phenylene sulfide) nominal m.w. 10000 ,powder 9016-75-5
2-Pyrrolidinone, 98% 616-45-5
Ethyl Caprate, 99+% 110-38-3
2,4-Dihydroxybenzoic acid, 97% 89-86-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net