FISKE BROS REFINING CO -- LUBRIPLATE NO.130-A, NO. 130-AA
=======================================================
Material Safety Data Sheet
=======================================================
NIIN: 00-857-9079
MSDS Num: CJJFR
MSDS NAME: LUBRIPLATE NO.130-A, NO. 130-AA
Responsible Party
Name: FISKE BROS REFINING CO
Address: 129 LOCKWOOD ST
City: NEWARK NJ 07105-4720
Info Phone: 201-589-9150
Emergency Phone Number: 800-255-3924
=======================================================
Item Description Information
=======================================================
Item Manager: S9G
Item Name: GREASE,GENERAL PURPOSE
Unit of Issue: CN
Quantitative Expression: 00000000014OZ
UI Container Qty: 1
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: TLV FOR OIL MIST IN AIR: 5 MG/M3
Route Of Entry Inds - Inhalation: NO
Skin: NO
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: PROLONGED OR REPEATED SKIN CONTACT MAY CAUSE SKIN
IRRITATION. PRODUCT CONTACTING THE EYES MAY CAUSE EYE IRRITATION. HUMAN
HEALTH RISKS VARY FROM PERSON TO PERSON. AS A PRECAUTION, EXPOSURE TO
LIQUIDS, VAPORS MISTS AND FUMES SHOULD BE MINIMIZED. THIS PRODUCT HAS A LOW
ORDER OF TOXICITY, BUT MINUTE AMOUNTS ASPIRATED INTO THE LUNGS DURING
INGESTION MAY CAUSE MILD TO SEVERE PULMONARY INJURY.
Explanation Of Carcinogenicity: NONE SPECIFIED BY MANUFACTURER
Signs And Symptions Of Overexposure: SKIN-IRRITATION. ASPIRATION-MILD TO SEVER
PULMONARY INJURY.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER
First Aid: EYE CONTACT: FLUSH WITH WATER FOR 15 MINUTES OR UNTIL IRRITATION
SUBSIDES. IF IRRITATION PERSISTS, CONSULT A PHYSICIAN. SKIN CONTACT: REMOVE
ANY CONTAMINATED CLOTHING & WASH WITH SOAP & WARM WATER. IF INJECTED
BY HIGH PRESSURE UNDER SKIN, REGARDLESS OF ITS APPEARANCE OR SIZE, COTACT A
PHYSICIAN IMMEDIATELY! DELAY MAY CAUSE LOSS OF AFFECTED PART OF THE BODY.
INHALED:VAPOR PRESSURE IS VERY LOW & INH ALATION AT ROOM TEMPERATURE IS
NOT A PROBLEM. IF OVERCOME BY VAPOR FROM HOT PRODUCT, IMMEDIATELY REMOVE FROM
EXPOSURE & CALL A PHYSICIAN. INGESTED:IF INGESTED, CALL A PHYSICIAN
IMMEDIATELY. DO NOT IND UCE VOMITING!
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: SCRAPE UP GREASE, WASH REMAINDER WITH SUITABLE
PETROLEUM SOLVENT OR ADD SOLVENT. KEEP PETROLEUM PRODUCTS OUT OF SEWERS AND
WATER COURSES. ADVISE AUTHORITIES IF PRODUCT HAS ENTERED OR MAY ENTER SEWERS
AND WATER COURSES.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER
Waste Disposal Methods: ASSURE CONFORMITY WITH APPLICABLE DISPOSAL REGULATIONS.
DISPOSE OF ABSORBED MATERIAL AT AN APPROVED WASTE DISPOSAL FACILITY OR SITE.
Handling And Storage Precautions: KEEP CONTAINERS CLOSED WHEN NOT IN USE. DO
NOT HANDLE OR STORE NEAR HEAT, SPARKS, FLAME OR STRONG OXIDANTS.
Other Precautions: REMOVE OIL-SOAKED CLOTHING AND LAUNDER BEFORE REUSE. CLEANSE
SKIN THOROUGHLY AFTER CONTACT.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: COC
Flash Point: =204.4C, 400.F
Lower Limits: 0.9
Upper Limits: 7.0
Extinguishing Media: FOAM, DRY CHEMICAL, CARBON DIOXIDE OR WATER SPRAY (FOG).
Fire Fighting Procedures: COOL EXPOSED CONTAINERS WITH WATER. USE AIR-SUPPLIED
BREATHING EQUIPMENT FOR ENCLOSED OR CONFINED SPACES.
Unusual Fire/Explosion Hazard: DO NOT STORE OR MIX WITH STRONG OXIDANTS. EMPTY
CONTAINERS RETAIN RESIDUE. DO NOT CUT, DRILL, GRIND, OR WELD, AS THE MAY
EXPLODE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NORMALLY NOT NEEDED.
Ventilation: LOCAL EXHAUST, MECHANICAL(GENERAL) USED TO CAPTURE FUMES AND
VAPORS.
Protective Gloves: USE OIL-RESISTANT, IF NEEDED.
Eye Protection: GOGGLES.
Other Protective Equipment: USE OIL-RESISTANT APRON, IF NEEDED.
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER
Supplemental Safety and Health: NONE SPECIFIED BY MANUFACTURER
=======================================================
Physical/Chemical Properties
=======================================================
HCC: V6
Boiling Point: >287.8C, 550.F
M.P/F.P Text: SEMI-SOLID
Vapor Pres: <0.01
Vapor Density: >5
Spec Gravity: 0.94-0.96
Solubility in Water: NEGLIGIBLE
Appearance and Odor: SMOOTH, OFF-WHITE GREASE WITH MINERAL OIL ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: N/A.
Materials To Avoid: AVOID CONTACT WITH STRONG OXIDANTS LIKE LIQUID CHLORINE,
CONCENTRATED OXYGEN.
Hazardous Decomposition Products: MAY FORM SULFUR DIOXIDE (SO2). IF INCOMPLETE
COMBUSTION, CARBON MONOXIDE.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: N/A.
=======================================================
Toxicological Information
=======================================================
Toxicological Information: NONE SPECIFIED BY MANUFACTURER
=======================================================
Ecological Information
=======================================================
Ecological: NONE SPECIFIED BY MANUFACTURER
=======================================================
MSDS Transport Information
=======================================================
Transport Information: NONE SPECIFIED BY MANUFACTURER
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: SARA TITLE III, SECTION 313 STATUS: ZINC COMPOUNDS
<5%.
Federal Regulatory Information: NONE SPECIFIED BY MANUFACTURER
State Regulatory Information: NONE SPECIFIED BY MANUFACTURER
=======================================================
Other Information
=======================================================
Other Information: NONE SPECIFIED BY MANUFACTURER
=======================================================
Transportation Information
=======================================================
Trans ID NO: 146487
MSDS NAME: LUBRIPLATE NO.130-A, NO. 130-AA
MSDS Prepared Date: 01/01/1999
Review Date: 07/22/1999
Net Unit Weight: 0.88 LB
Multiple KIT Number: 0
Unit Of Issue: CN
Container QTY: 1
=======================================================
Detail DOT Information
=======================================================
DOT PSN Code: ZZZ
DOT Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail IMO Information
=======================================================
IMO PSN Code: ZZZ
IMO Proper Shipping Name: NOT REGULATED FOR THIS MODE OF TRANSPORTATION
=======================================================
Detail IATA Information
=======================================================
IATA PSN Code: ZZZ
IATA Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail AFI Information
=======================================================
AFI PSN Code: ZZZ
AFI Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: LUBRIPLATE NO.130-A, NO. 130-AA
Company: FISKE BROS REFINING CO
Street: 129 LOCKWOOD ST
City: NEWARK NJ
Zipcode: 07105-4720
Health Emergency Phone: 800-255-3924
Label Required IND: Y
Date Of Label Review: 07/22/1999
Status Code: A
Year Procured: 1999
Origination Code: F
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: NO
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: TARGET ORGANS: SKIN. PROLONGED OR REPEATED SKIN CONTACT
MAY CAUSE SKIN IRRITATION. PRODUCT CONTACTING THE EYES MAY CAUSE EYE
IRRITATION. HUMAN HEALTH RISKS VARY FROM PERSON TO PERSON. AS A PRECAUTION,
EXPOSURE TO LIQUIDS, VAPORS MISTS AND FUMES SHOULD BE MINIMIZED. THIS PRODUCT
HAS A LOW ORDER OF TOXICITY, BUT MINUTE AMOUNTS ASPIRATED INTO THE LUNGS
DURING INGESTION MAY CAUSE MILD TO SEVERE PULMON ARY INJURY.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
PPD-2 FIXER SOLUTION, 23686
| 77-86-1
7757-79-1
110-15-6
288-32-4
87-69-4
7732-18-5 |
|
HUMISEAL, 1C51
| |
|
ENHANCED PRINT CARTRIDGE, 20K93130
| |
|
IPA-ANHYDROUS
| |
|
TEFLON TE6264 PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
TEFLON TE6304N PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
LUBRIPLATE NO.130-A, NO. 130-AA
| |
|
TEFLON TE6467 PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
MIL-C-10924F, SL-065
| |
|
FLAT BLACK, EFB534S0055
| 1317-65-3 |
|
PERMATEX(R) KLEAN 'N PRIME(TM) ACTIVATOR, 24163
| 67-64-1
75-28-5
149-57-5
22221-10-9
58823-74-8
7439-92-1
7440-02-0 |
|
N-1000 HIGH PURITY ANTI-SEIZE LUBRICANT, 51115-51117
| |
|
TEFLON TE6468 PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
TEFLON TE6469 PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
C-5A ANTISEIZE, ANTI-SEIZE LUBRICANT, 39614
| 7782-42-5
64742-52-5
7440-50-8
64742-18-3
14808-60-7
64755-01-7
64742-54-7 |
|
TEFLON TE6470 PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
PXI HIGH STRENGTH RETAINING COMPOUND, 28649
| 24448-20-2
27813-02-1
39382-25-7
80-15-9
114-83-0
613-48-9
110-16-7
81-07-2
75-56-9
7440-38-2
7440-43-9
7439-92-1
7440-02-0 |
|
TEFLON TE6382 PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
POTASH, SULFURATED, P624.31
| 39365-88-3 |
|
TEFLON TE6472 PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
TEFLON TE6473 PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
TEFLON TE6474 PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
TEFLON TE6488 PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
TEFLON TE6489 PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
TEFLON TE6490 PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
TEFLON TE 6493 PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
TEFLON TG70J PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
AMMONIUM OXALATE, 4% APHA, LC11280
| 6009-70-7
7732-18-5 |
|
MIL-L-2104F, 15W40
| |
|
STARTING FLUID CYLINDER
| |
|
NIKAL NUCLEAR
| |
|
VESSEL SOLUTION - PYRIDINE FREE, 27-910-05
| |
|
HI-CAT TM #85 CONVERTER FOR HIGH SOLIDS POLYURETHANE TOP COA
| 763-69-9
3779-63-3
822-06-0 |
|
IRON OXIDE, RED
| 1309-37-1 |
|
HYSOL EA 9309.3NA GAL SYSTEM PART B, P/N: AS9186018
| |
|
GRAY PRIMER, 2182 838
| |
|
HYSOL EA 9309.3NA GAL SYSTEM PART A, P/N: AS9186018
| |
|
ORIGINAL GLUE
| |
|
HYSOL EA 9309.3NA GAL SYSTEM PART A, P/N: AS9186018
| |
|
ENPLATE PC-475
| |
|
SEVOFLURANE, SEVOFRANE; ARGON
| |
|
ALCOSPERSE 602-N, 3015697-1-17-0
| |
|
ETHYLENE GLYCOL SOLUTION
| 107-21-1
7732-18-5 |
|
SILVER CONCENTRATE, S3140
| |
|
DIAZEPAM INJECTION,UPS
| 439-14-5 |
|
DESCALER
| 7664-38-2
7732-18-5 |
|
WEAK NITRIC ACID, GRADE 20.5
| 7697-37-2
7732-18-5 |
|
MIL-G-10924F (485539)
| |
|
RIGIDITE 2054 STRUCTURAL PREPREG
| |
|
SEALING COMPOUND; SC-0269 124
| 8020-83-5
8052-41-3
7429-90-5
14808-60-7
1317-65-3
1332-58-7
14807-96-6 |
|
|