LOCTITE CORPORATION -- N-1000 HIGH PURITY ANTI-SEIZE LUBRICANT, 5111
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CJJGQ
MSDS NAME: N-1000 HIGH PURITY ANTI-SEIZE LUBRICANT, 51115-51117
Responsible Party
Name: LOCTITE CORPORATION
Address: 1001 TROUT BROOK CROSSING
City: ROCKY HILL CT 06067
Info Phone: 860-571-5100
Emergency Phone Number: 860-571-5100
Resp. Party Other MSDS No.: 1918
Proprietary Ind: Y
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: ARONSON-CAMPBELL INDUSTRIAL SUPPLY INC
Address: 5300 DENVER AVE S
Box: 80987
City: SEATTLE WA 98108-2247
Phone: 206-762-0700
Name: LOCTITE CORPORATION
Address: 1001 TROUT BROOK CROSSING
City: ROCKY HILL CT 06067-3910
Phone: 860-571-5100
=======================================================
Item Description Information
=======================================================
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: NO
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE: EYE CONT: MODERATELY IRRITATING. SKIN CONT:
MODERATE IRRITANT. PROLONGED CONT MAY CAUSE DERMATITIS. INHAL: INHAL OF DUST
AT LEVELS ABOVE RECOMMENDED EXPOSURE LIMITS MAY CAUSE METALLIC OR SWEET
TASTE, IRRITATION OF PHARYNX, & POSSIBLE ULCERATION W/PERFORATION OF
NASAL SEPTUM. INGEST: MODERATELY TOXIC. IRRITATING TO MOUTH, THROAT &
STOMACH, WITH NAUSEA. CHRONIC: REPEATED & PROLONGED INHAL OF GRAPHITE
/CARBON DUSTS MAY CAUSE PULMONARY FIBROSIS, EMPHYSEMA AND PNEUMOCONIOSIS.
SEVERITY OF THESE EFFECTS IS GREATLY INFLUENCED BY PRESENCE OF OTHER HARMFUL
MINERAL DUSTS, (EFTS OF OVEREXP)
Signs And Symptions Of Overexposure: HLTH HAZS: MOST NOTABLY CRYSTALLINE
SILICA. "THIS PRODUCT CONTAINS ENCAPSULATED METAL POWDER WHICH CONTAINS
COPPER & ZINC. NO EXPOSURE TO FREE METAL POWDER IS ANTIC DURING NORMAL
APPLIC OF THIS PROD. METAL POWDER MAY BE RELEASED, HOWEVER, BY GRINDING OR
MACHINING OF CURED CMPD OR COATED SURF. RPTD/PRLNGD OVEREXP TO METAL DUST MAY
CAUSE METAL-FUME FEVER, METALLIC TASTE, & DISCOLORATION OF SKIN & HA
IR. REFER TO PROT EQUIP SECTION FOR APPROP PROTECTIVE MEASURES.
Medical Cond Aggravated By Exposure: PREEXISTING PULMONARY AND DERMATOLOGICAL
DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO HAZARDOUS COMPONENTS.
First Aid: EYE CONT: IMMED FLUSH W/PLENTY OF WATER FOR AT LST 15 MINUTES. GET
MED ATTN, IF IRRIT PERSISTS. SKIN CONT: WASH W/SOAP & WATER. GET MED ATTN
IF IRRIT DEVELOPS/PERSISTS. INHAL: NO SPECIFIC TREATMENT IS NEC SINCE THIS
MATL IS NOT LIKELY TO BEHAZ BY INHAL. IF EXPOSED TO EXCESS LEVELS OF
DUST/FUMES, REMOVE TO FRESH AIR & GET MED ATTN IF COUGH/OTHER SYMPS
DEVELOP. INGEST: DO NOT INDUCE VOMIT. GIVE GLAS S OF WATER/MILK. CALL
PHYS/POIS CTL CTR IMMED. NEVER GIVE ANYTHING BY MOUTH TO UNCONSCIOUS PERSON.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: RECLAIM CLEAN MATERIAL. CONTAMINATED MATL SHOULD BE
SWEPT OR SHOVELED INTO APPROPRIATE WASTE CONTAINER AND DISPOSED OF IN
ACCORDANCE WITH APPLICABLE FEDERAL, STATE AND LOCAL REGULATIONS.
Waste Disposal Methods: REVIEW ALL CURRENT FEDERAL, STATE, AND LOCAL
REGULATIONS REGARDING HEALTH AND DISPOSAL FOR APPROPRIATE DISPOSAL
PROCEDURES.
Handling And Storage Precautions: WASH HANDS BEFORE EATING. AVOID PROLONGED OR
REPEATED CONTACT WITH SKIN. DO NOT TAKE INTERNALLY. FOR INDUSTRIAL USE ONLY.
Other Precautions: STORE AWAY FROM HEAT. KEEP OUT OF THE REACH OF CHILDREN.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: COC
Flash Point: =226.7C, 440.F
Extinguishing Media: DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures: USE NIOSH APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT
(FP N). USE WATER TO COOL EXPOSED CONTAINERS. WATER STREAM DIRECTED INTO FIRE
MAY CAUSE FROTHING WITH SUBSEQUENT SPREAD OF FLAME.
Unusual Fire/Explosion Hazard: FINELY DIVIDED DUST IN AIR MAY PRESENT EXPLOSION
HAZARD. PREVENT DUST BUILDUP. CLOSED CNTNRS MAY RUPTURE/EXPLODE (DUE TO PRESS
BUILD-UP) WHEN EXPOSED TO EXTREME HEAT. IRRITATING AND/OR TOXIC GASES OR
FUMES MAY BE GENERATED BY THERMAL DECOMPOSITION OR COMBUSTION.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NONE NORMALLY REQUIRED UNDER GENERAL VENTILATION. IF
EXPOSURE LEVELS ARE UNKNOWN, IF LEVELS EXCEED TLV/PEL, OR IF EFFECTS OCCUR,
USE NIOSH APPROVED DUST/MIST RESPIRATOR IN ACCORDANCE WITH APPLICABLE H EALTH
AND SAFETY REGULATIONS AND MANUFACTURER'S RECOMMENDATIONS.
Ventilation: GENERAL VENTILATION USUALLY ADEQUATE.
Protective Gloves: CLOTH OR SYNTHETIC GLOVES.
Eye Protection: ANSI APPROVED CHEMICAL WORKERS GOGGLES (FP N).
Other Protective Equipment: EYE WASH & DELUGE SHOWER MEETING ANSI DESIGN
CRITERIA (FP N). CLEAN CLOTHING TO COVER SKIN.
Work Hygienic Practices: FOLLOW GENERAL INDUSTRIAL SAFETY PRACTICES DURING USE.
DO NOT REUSE EMPTY CONTAINERS WITHOUT COMMERCIAL CLEAN OR RECONDITION. FOLLOW
ALL MSDS/LABEL PRECAUTIONS EVEN AFTER CNTNR IS EMPTIED.
=======================================================
Physical/Chemical Properties
=======================================================
Boiling Point: >-17.8C, 0.F
B.P. Text: 0-4215F
Vapor Density: HVR/AIR
Spec Gravity: 1.2331
Viscosity: HIGH
Evaporation Rate & Reference: SLOWER THAN BUTYL ACETATE
Solubility in Water: NEGLIGIBLE
Appearance and Odor: COPPER, MILD OIL ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: PROLONGED EXPOSURE TO HEAT.
Materials To Avoid: NITRATES, NITRITES, CHLORINATED HYDROCARBONS, CHLORIDES,
PALLADIUM, SELENIUM, MANGANESE, MAGNESIUM & POTASSIUM CHLORATE, SODIUM
CARBONATE, SULFATES, DIBORANE.
Hazardous Decomposition Products: OXIDES OF CARBON. VARIOUS HYDROCARBONS.
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
Toxicological Information: NO PRODUCT OR COMPONENT TOXICOLOGICAL INFORMATION IS
AVAILABLE.
=======================================================
MSDS Transport Information
=======================================================
Transport Information: DOT PROPER SHIPPING NAME: NOT REGULATED. DOT TECHNICAL
NAME: NOT REGULATED. DOT HAZARD CLASS: NOT REGULATED. HAZARD SUBCLASS: N/A.
DOT UN/NA NUMBER: N/A. PACKING GROUP: N/A. RESP. GUIDE PAGE: IMDG INF
ORMATION: NOT REGULATED. AIR/IATA INFORMATION: NOT REGULATED.
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: THID PROD CNTNS FOLLOWING SUBSTANCES SUBJECT TO
RPTG REQUIREMENTS OF SECTION 313 OF TITLE III OF SUPERFUND AMENDMENTS &
REAUTHORIZATION ACT OF 1986 & 40 CFR PART 372. COPPER. NEW JERSEY
RIGHT-TO-KNOW: FOLLOWING MATLS ARE NON-HAZ, BUT ARE AMONG TOP 5 COMPONENTS
IN THIS PROD: WHITE MINERAL OIL, RHEOLOGICAL ADDITIVE, VISCOSITY
MODIFIER-TSR1364115270. PENNSYLVANIA RIGHT-TO-KNOW: FOLLOWING NON-HAZ INGR
EDS ARE PRESENT IN PROD AT GREATER THAN 3%:WHITE MINERAL OIL &
RHEOLOGICAL ADDITIVE.
Federal Regulatory Information: RCRA HAZARDOUS WASTE CLASS: NOT REGULATED. RCRA
HAZARDOUS WASTE CODES: NO INFORMATION. CERCLA REPORTABLE QUANTITY(RQ): NONE
KNOWN.
OSHA: HAZ BY DEFINITION OF HAZARD COMMUNICATION STD (29 CFR 1910.1200 ). CERCLA
- SARA HAZARD CATEGORY: THIS PROD HAS BEEN REVIEWED & IS CONSIDERED,
UNDER APPLICABLE DEFINITIONS, TO MEET THE FOLLOWING CATEGORIES: CHRONIC
HEALTH HAZARD. CANADIAN W: THIS MSDS HAS BEEN PREPARED IN COMPLIANCE WITH
CONTROLLED PRODUCT REGULATIONS EXCEPT FOR USE OF THE 16 HEADINGS. CANAD IAN W
CLASS: D28.
State Regulatory Information: CALIFORNIA PROPOSITION 65: WARNING: THE
CHEMICAL(S) NOTED BELOW AND CONTAINED IN THIS PRODUCT, ARE KNOWN TO THE STATE
OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM: NO
PROPO SITION 65 CHEMICALS EXIST IN THIS PRODUCT.
=======================================================
Other Information
=======================================================
Other Information: RATINGS - HEALTH: 1. FLAMMABILITY: 1. REACTIVITY: 0.
PREVIOUS MSDS REVISION DATE: 09/29/93. REASON FOR REVISION: NATIONAL STOCK
NUMBER. LEGEND: N.A. - NOT APPLICABLE, N.E. - NOT ESTABLISHED, N.D. - NOT
DETERMINED. LEGEND TON: ACGIH - AMERICAN CONFERENCE OF GOVT INDUSTRIAL
HYGIENISTS: OSHA = US OCCUP SFTY & HLTH ADMIN; UK = UNITED KINGDOM; GER =
GERMANY; TLV-TWA = THRESHOLD LIMIT VALUE-TIME WE IGHTED AVERAGE (8 HRS); STEL
= SHORT-TERM EXPOSURE LIMIT (15 MIN); C = CELING VALUE; PEL = PERMISSIBLE
EXPOSURE LIMIT.
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: N-1000 HIGH PURITY ANTI-SEIZE LUBRICANT, 51115-51117
Company: LOCTITE CORPORATION
Street: 1001 TROUT BROOK CROSSING
City: ROCKY HILL CT
Zipcode: 06067-3910
Health Emergency Phone: 860-571-5100
Label Required IND: Y
Date Of Label Review: 05/06/1999
Status Code: A
Origination Code: F
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE: EYE CONT: MODERATELY IRRITATING. SKIN CONT:
MODERATE IRRITANT. PROLONGED CONT MAY CAUSE DERMATITIS. INHAL: INHAL OF DUST
AT LEVELS ABOVE RECOMMENDED EXPOSURE LIMITS MAY CAUSE METALLIC OR SWEET
TASTE, IRRITATION OF PHARYNX, & POSSIBLE ULCERATION W/PERFORATION OF
NASAL SEPTUM. INGEST: MODERATELY TOXIC. IRRITATING TO MOUTH, THROAT &
STOMACH, WITH NAUSEA. CHRONIC: REPEATED & PROLONGED INHAL OF GRAPHITE
/CARBON DUSTS MAY CAUSE PULMONARY FIBROSIS, EMPHYSEMA AND PNEUMOCONIOSIS.
SEVERITY OF THESE EFFECTS IS GREATLY INFLUENCED BY PRESENCE OF OTHER HARMFUL
MINERAL DUSTS, MOST NOTABLY CRYSTALLINE SILICA.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
PPD-2 FIXER SOLUTION, 23686
| 77-86-1
7757-79-1
110-15-6
288-32-4
87-69-4
7732-18-5 |
|
HUMISEAL, 1C51
| |
|
ENHANCED PRINT CARTRIDGE, 20K93130
| |
|
IPA-ANHYDROUS
| |
|
TEFLON TE6264 PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
TEFLON TE6304N PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
LUBRIPLATE NO.130-A, NO. 130-AA
| |
|
TEFLON TE6467 PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
MIL-C-10924F, SL-065
| |
|
FLAT BLACK, EFB534S0055
| 1317-65-3 |
|
PERMATEX(R) KLEAN 'N PRIME(TM) ACTIVATOR, 24163
| 67-64-1
75-28-5
149-57-5
22221-10-9
58823-74-8
7439-92-1
7440-02-0 |
|
N-1000 HIGH PURITY ANTI-SEIZE LUBRICANT, 51115-51117
| |
|
TEFLON TE6468 PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
TEFLON TE6469 PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
C-5A ANTISEIZE, ANTI-SEIZE LUBRICANT, 39614
| 7782-42-5
64742-52-5
7440-50-8
64742-18-3
14808-60-7
64755-01-7
64742-54-7 |
|
TEFLON TE6470 PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
PXI HIGH STRENGTH RETAINING COMPOUND, 28649
| 24448-20-2
27813-02-1
39382-25-7
80-15-9
114-83-0
613-48-9
110-16-7
81-07-2
75-56-9
7440-38-2
7440-43-9
7439-92-1
7440-02-0 |
|
TEFLON TE6382 PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
POTASH, SULFURATED, P624.31
| 39365-88-3 |
|
TEFLON TE6472 PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
TEFLON TE6473 PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
TEFLON TE6474 PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
TEFLON TE6488 PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
TEFLON TE6489 PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
TEFLON TE6490 PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
TEFLON TE 6493 PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
TEFLON TG70J PTFE FLUOROPOLYMER RESIN
| 9002-84-0
7664-39-3
353-50-4 |
|
AMMONIUM OXALATE, 4% APHA, LC11280
| 6009-70-7
7732-18-5 |
|
MIL-L-2104F, 15W40
| |
|
STARTING FLUID CYLINDER
| |
|
NIKAL NUCLEAR
| |
|
VESSEL SOLUTION - PYRIDINE FREE, 27-910-05
| |
|
HI-CAT TM #85 CONVERTER FOR HIGH SOLIDS POLYURETHANE TOP COA
| 763-69-9
3779-63-3
822-06-0 |
|
IRON OXIDE, RED
| 1309-37-1 |
|
HYSOL EA 9309.3NA GAL SYSTEM PART B, P/N: AS9186018
| |
|
GRAY PRIMER, 2182 838
| |
|
HYSOL EA 9309.3NA GAL SYSTEM PART A, P/N: AS9186018
| |
|
ORIGINAL GLUE
| |
|
HYSOL EA 9309.3NA GAL SYSTEM PART A, P/N: AS9186018
| |
|
ENPLATE PC-475
| |
|
SEVOFLURANE, SEVOFRANE; ARGON
| |
|
ALCOSPERSE 602-N, 3015697-1-17-0
| |
|
ETHYLENE GLYCOL SOLUTION
| 107-21-1
7732-18-5 |
|
SILVER CONCENTRATE, S3140
| |
|
DIAZEPAM INJECTION,UPS
| 439-14-5 |
|
DESCALER
| 7664-38-2
7732-18-5 |
|
WEAK NITRIC ACID, GRADE 20.5
| 7697-37-2
7732-18-5 |
|
MIL-G-10924F (485539)
| |
|
RIGIDITE 2054 STRUCTURAL PREPREG
| |
|
SEALING COMPOUND; SC-0269 124
| 8020-83-5
8052-41-3
7429-90-5
14808-60-7
1317-65-3
1332-58-7
14807-96-6 |
|
|