Search   
MSDS  
:
 HENRY 595 COVE BASE ADHESIVE
CAS  
:
 
NAME  
:
 
ARMSTRONG WORLD INDUSTRIES,  I -- HENRY 595 COVE BASE ADHESIVE                 
=======================================================
Material Safety Data Sheet 
=======================================================
NIIN: 00-473-6350
MSDS Num: CLNHM
MSDS NAME: HENRY 595 COVE BASE ADHESIVE
Responsible Party
Name: ARMSTRONG WORLD INDUSTRIES,  INC.
Address: 313 W. LIBERTY ST.
Box: 3209
City: LANCASTER PA 17604
Info Phone: 717-396-2328; 717-396-2935
Emergency Phone Number: 800-424-9300
Preparer's Name: ERNEST CARTER
Chemtrec IND/Phone: (800)424-9300
Review Ind: Y
Published: Y
=======================================================
Contractor Summary 
=======================================================
Name: ARMSTRONG WORLD INDUSTRIES,  INC.
Address: 313 W. LIBERTY ST.
Box: 3209
City: LANCASTER PA 17604
Phone: 717-396-2328; 717-396-2935
=======================================================
Item Description Information 
=======================================================
Item Manager: GSA
Item Name: ADHESIVE
Unit of Issue: GL
UI Container Qty: 0
=======================================================
Health Hazards Data 
=======================================================
Signs And Symptions Of Overexposure: SKIN AND EYES: MAY PRODUCE SLIGHT
  TRANSIENT IRRITATION TO THE EYES AND SKIN.
First Aid: SKIN AND EYES: FLUSH ANY EYE CONTACT WITH PLENTY OF WATER, SKIN
  CONTACT, WASH WITH SOAP AND WATER.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: CONTAIN SPILL, PREVENTING IT FROM ENTERING SEWER
  LINES OR WATERWAYS, USE ABSORBENT TO ASSIST WITH THE PICK-UP OF MATERIAL.
  SCRAPE UP  PRODUCT AND PLACE INTO CONTAINER. RESIDUAL, OF PRODUCT, WHILE  STI
  LL WET, CAN BE CLEANED UP WITH WARM SOAPY WATER.
Waste Disposal Methods: DISPOSE OF CONTAINER AND ANY UNUSED CONTENTS IN
  ACCORDANCE WITH FEDERAL, STATE, AND LOCAL WASTE DISPOSAL REGULATIONS.
Handling And Storage Precautions: RECOMMENDED STORAGE TEMPERATURE IS BELOW 90
  F.
Other Precautions: WORK SITE ENVIRONMENT: INITIALLY THERE MAY BE A POTENTIAL
  ADVERSE IMPACT ON INDOOR AIR QUALITY WITHIN GENERAL WORK AREA DURING
  INSTALLATION PROCESS. THEREFORE, ADVISE BUILDING MANAGER OR OTHER APPROPR
  IATE PERSON THAT IT WILL BE NECESSARY TO ESTABLISH AND MAINTAIN ADEQUATE
  VENTILATION.
=======================================================
Fire and Explosion Hazard Information 
=======================================================
Flash Point Method: SCC
Flash Point: =93.3C, 200.F
Extinguishing Media: CARBON DIOXIDE, DRY CHEMICAL, WATER SPRAY.
Fire Fighting Procedures: PROTECT FIRE FIGHTERS FROM TOXIC PRODUCTS OF
  COMBUSTION BY WEARING SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard: CLOSED CONTAINERS IN A FIRE MAY RUPTURE DUE TO
  PRESSURE BUILD UP USE WATER TO COOL CONTAINERS TO PREVENT THIS.
=======================================================
Control Measures 
=======================================================
Respiratory Protection: SHOULD NOT BE REQUIRED
Ventilation: NORMAL, AMBIENT VENTILATION SHOULD BE SUFFICIENT
Protective Gloves: LATEX OR RUBBER GLOVES
Eye Protection: SPECTACLE TYPE GLASSES.
Supplemental Safety and Health: RECOMMENDED STORAGE BELOW 90 DEG F.
=======================================================
Physical/Chemical Properties 
=======================================================
Boiling Point: >100.C, 212.F
Vapor Pres: SAME AS WATER
Vapor Density: WATER
Spec Gravity: 1.33
PH: 9
Evaporation Rate & Reference: WATER
Solubility in Water: DISPERSIBLE
Appearance and Odor: WHITE PASTE. MILD.
=======================================================
Reactivity Data 
=======================================================
Stability Indicator: YES
Materials To Avoid: STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products: CARBON MONOXIDE, CARBON DIOXIDE, AND ORGANIC
  COMPOUNDS.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: WILL NOT OCCUR.
=======================================================
HAZCOM Label 
=======================================================
MSDS NAME: HENRY 595 COVE BASE ADHESIVE
Company: ARMSTRONG WORLD INDUSTRIES,  INC.
Street: 313 W. LIBERTY ST.
PO Box: 3209
City: LANCASTER PA
Zipcode: 17604
Health Emergency Phone: 800-424-9300
Label Required IND: Y
Date Of Label Review: 10/12/2001
Status Code: A
Origination Code: G
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
  information is formulated for use by elements of the Department of Defense.
  The United States of America in no manner whatsoever expressly or implied
  warrants, states, or intends said information to have any application, use or
  viability by or to any person or persons outside the Department of Defense
  nor any person or persons contracting with any instrumentality of the United
  States of America and disclaims all liability for such use. Any person
  utilizing this instruction who is not a military or civilian employee of the
  United States of America should seek competent professional advice to verify
  and assume responsibility for the suitability of this information to their
  particular situation regardless of similarity to a corresponding Department
  of Defense or other government situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
HASA MURIATIC ACID 7647-01-0
0301-6,QED
1676B-176, HARVEST KING DEXRON III/MERCON ATF
HENRY 595 COVE BASE ADHESIVE
L-4498 SIMILAR TO PRODUCT FAMILY L-6543A
0301-1,QED
O301, QED ENVIRONMENTALLY PREFERRED SOLVENT
STADIS 450 CONDUCTIVITY IMPROVER
AI 8493-2 AIR FORCE TYPE II
DIESEL STARTING FLUID (CYLINDERS 820-0327, 820-0335, 820-127
SERMETEL 1337 PART B
LS-29 (CP-29)
19025, MIL-PRF-17672D GR 2075 TH 64742-54-7
INTERIOR SANDING WOOD SEALER/FINISH, 15-014 96-29-7
8052-41-3
8032-32-4
557-05-1
83307, HI-SPOT BLUE
IMPERIAL 2135TH
UNIFLOR 8991MT
ACRYLIC/EPOXY WATERBORNE SEMI-GLOSS/ENAMEL, 330085 (ACRYLIC)
ACRYLIC/EPOXY WATERBORNE SEMI-GLOSS/ENAMEL, 330086 (EPOXY)
BACK TO NATURE STRIP-TOX 872-50-4
1119-40-0
627-93-0
C4821A, C4846A, C4872A, C4891A
NOFIRE (R) A18NV INTUMESCENT FIRE RETARDANT COATING
AEROGLAZE 9947B WASH PRIMER, PART B 108-65-6
88917-22-0
64-17-5
7664-38-2
78-92-2
PERMA-SLIK RAC AEROSOL (PPSRACAE)
FB080, BRAKE PREP 111-76-2
6834-92-0
FC-15 GEL
FIRELAND FLOOR TILE ADHESIVE
RTV 5145 PASTE NON-CORR RTV SEALANT 20250 64-17-5
67-56-1
CHISEL GASKET REMOVER SOLVENT 75-09-2
106-97-8
75-28-5
74-98-6
67-56-1
BINDER 350
C4822A, C4847A, C4874A, C4892A
MIL P20689D T1 C1 PLASTISOL, VP694581
343715, FANOX N 33
C4823A, C4848A, C4873A, C4893A
PLASTISEAL "F"
STEPANFOAM C-614-R
INSBOARD 2600, INSBOARD 2600 HD
REMOVABLE THREADLOCKER 242, IN 24231 25852-47-5
9004-96-0
81-07-2
80-15-9
67-56-1
112945-52-5
613-48-9
13463-67-7
PPB-4 NEUTRALIZER SOLUTION, 23688 1310-73-2
7732-18-5
77-86-1
87-69-4
POLYSPEC 700 EPOXY RESIN (700000, 700004) 115-86-6
84852-15-3
TWICELL, NICKEL METAL HYDRIDE BATTERY 7440-02-0
12054-48-7
7440-48-4
7439-96-5
7439-91-0
7440-45-1
7440-00-8
1310-58-3
1310-73-2
1310-65-2
UTP S, AWS ENI-C1 7440-02-0
7782-42-5
1344-09-8
30522, HYDRAULIC JACK OIL 64742-52-5
POLYSPEC "M-50" PRIMER - A708 (708043) 13463-67-7
71-36-3
110-43-0
12001-26-2
25085-99-8
DCI-4A
U500, NICKEL ALLOY 7440-02-0
7440-47-3
7440-48-4
7439-98-7
U700, NICKEL ALLOY 7440-02-0
7440-47-3
7440-48-4
7439-98-7
7429-90-5
7440-32-6
X750, NICKEL ALLOY 7440-02-0
7440-47-3
7440-48-4
7429-90-5
7440-32-6
7439-89-6
7440-21-3
836, HAI-836 ALLOY 7440-47-3
7439-89-6
7440-02-0
023, HAI-EPX ALLOY 7440-47-3
7440-02-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com