===================== Product Identification =====================
MSDS NAME:LATEX VINYL PRIMER SEALER,8-225
NIIN:00N011003
MSDS Number: BJJSZ
=== Responsible Party ===
Company:BENNETTE PAINT MFG CO,INC
Address:401 INDUSTRY DRIVE
City:HAMPTON
State:VA
ZIP:23661
Info Phone Num:804-838-7777
Emergency Phone Num:804-838-7777
CAGE:3Y107
=== Contractor Identification ===
Company:BENNETTE PAINT MANUFACTURING CO INC
Address:401 INDUSTRY DR
Box:City:HAMPTON
State:VA
ZIP:23661
Country:US
Phone:804-838-7777
CAGE:3Y107
============= Composition/Information on Ingredients =============
Name:SILICEOUS MUSCOVITE MICA
Other REC Limits:N/K
OSHA PEL:3 MG/M3 RESP DUST
ACGIH TLV:3 MG/M3 RESP DUST
Name:ETHYLENE GLYCOL (SARA III)
CAS:107-21-1
RTECS #:KW2975000
Other REC Limits:N/K
OSHA PEL:C 50 PPM
ACGIH TLV:C 50 PPM,VAPOR; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:METHYL ALCOHOL (METHANOL) (SARA III)
CAS:67-56-1
RTECS #:PC1400000
Other REC Limits:N/K
OSHA PEL:S,200PPM/250STEL
ACGIH TLV:S,200PPM/250STEL; 93
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:2-AMINO-2-METHYL-1-PROPANOL.VAPOR PRESSURE:<1 MMHG @
25C,77F (AMINE ONLY).
CAS:124-68-5
RTECS #:UA5950000
Other REC Limits:N/K
OSHA PEL:N/K
ACGIH TLV:N/K
Name:VINYL ACETATE COPOLYMER EMULSION
Other REC Limits:10 PPM
OSHA PEL:N/K
ACGIH TLV:N/K
Name:PETROLEUM HYDROCARBON
Other REC Limits:5 MG/M3
OSHA PEL:N/K
ACGIH TLV:N/K
===================== Hazards Identification =====================
LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS AND SYMPTOMS OF
OVEREXPOSURE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:DIRECT CONTACT MAY RESULT IN
IRRIT.AMMONIA,FORMALDEHYDE,RESIDUAL MONOMER VAP MAY
IRRITATE.SKIN:PRLNG/RPTD CONT MAY CAUSE
IRRIT.AMMONIA,FORMALDEHYDE,RESIDUAL MONOMER VAP MAY
IRRITATE.INGEST:N/K (F P
N/ORNL).INHAL:AMMONIA,FORMALDEHYDE,RESIDUAL MONOMER VAP MAY
IRRITATE MUC MEMB,RESP TRACT;SYMPTOMS-HEADACHE,NAUSEA.
Medical Cond Aggravated by Exposure:ALLERGY OR SKIN SENSITIZATION.
======================= First Aid Measures =======================
Eyes:IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR AT LEAST 15
MIN & CONSULT A PHYSICIAN.SKIN:WASH THOROUGHLY WITH
SOAP.INGESTION:GIVE TWO GLASSES OF WATER TO DRINK & CALL A
PHYSICIAN.INHALATION:MOVE SUB JECT TO FRESH AIR.
===================== Fire Fighting Measures =====================
Flash Point:>200F,93.33C
Lower Limits:N/K
Extinguishing Media:FOAM,CO*2,DRY CHEMICAL,WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROT EQUIP
.USE WATER TO COOL CLOSED CONTR TO PREVENT PRESS BUILDUP & POSSIBLE
EXPLOSION WHEN EXPOSED TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.
================== Accidental Release Measures ==================
Spill Release Procedures:RECOVER LIQUID WITH ABSORBENT MATERIAL.
Neutralizing Agent:N/K
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN.
Other Precautions:AVOID PROLONGED CONTACT WITH SKIN.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
CONCENTRATION BELOW TLV .
Protective Gloves:RUBBER GLOVES IF SENSITIZATION PRESENT.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE NEEDED UNLESS SPECIAL EQUIPMENT
DESIRED.
Work Hygienic Practices:WASH HANDS AFTER USE,BEFORE EATING OR USING
WASHROOM.
Supplemental Safety and Health
BP RANGE:212-388F,100-197.78C.ROUTES OF ENTRY:INGESTION .
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:SEE SUPP
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/K
Vapor Density:>1 (AIR=1)
Spec Gravity:1.22 (WATER=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:N/K
Appearance and Odor:LIQUID
Percent Volatiles by Volume:70
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXTREME TEMPERATURES IN CLOSED CONTAINERS.
Hazardous Decomposition Products:NONE
Conditions to Avoid Polymerization:WILL NOT OCCUR.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
SAFE-T-QUENCH 2
| 7632-00-0 |
|
MICROTRAK REAGENTS,ADVANCE REAGENTS
| 26628-22-8 |
|
BLACK BLAST
| |
|
STD HERPES DIRECT SPECIMEN TEST (SUP DATA)
| 67-64-1 |
|
VINYL MASTIC WEATHER BARRIER (WC-1,COLORS)
| 108-05-4
107-41-5
107-21-1
115-96-8
61788-76-9 |
|
DEEP FREEZE ENAMEL,WHITE,0208W001S
| 67-63-0 |
|
RIMLEASE PRIMER (FK5575)
| 64742-48-9
76-13-1 |
|
HEAVY DUTY 30
| 7440-66-6 |
|
NORTHWIND
| 34590-94-8
6834-92-0 |
|
SPEEDRY DO YELLOW 2017 MARKERS
| 107-98-2
67-63-0
141-78-6
64-17-5
7440-47-3 |
|
EMIT DIGOXIN SERUM PRETREATMENT RGNT,6H419
| 7732-18-5
1310-73-2 |
|
FLO-KLEEN,6A942
| 141-43-5 |
|
FLOW CELL CLEANING SOLUTION A,3AO58
| 7647-01-0
7732-18-5 |
|
ADVANCE DIGOXIN PRETREATMENT REAGENT,PART A
| 10058-23-8 |
|
ADVANCE DIGOXIN BUFFER ADDITIVE,PART B
| 7757-83-7 |
|
STEAMSOL
| 34590-94-8
6834-92-0 |
|
POLYAMIDE RESIN,388-390
| |
|
EMIT & ADVANCE CALIBRATORS & CONTROLS,PT D
| |
|
PERMA-LOK HL 039;FORMERLY KNOWN (SUP DATA)
| 81-07-2
80-15-9
868-77-9
109-17-1 |
|
ADH 1177
| 78-93-3
64742-48-9
1309-48-4
108-88-3 |
|
DEFOMER 1888
| 111-76-2 |
|
ALODINE 1200 TONER 2
| 7697-37-2
7664-39-3
7440-47-3 |
|
RS-1M BLACK
| 111-76-2
123-42-2
67-63-0 |
|
HANDI-LUBE HEAVY (AEROSOL)
| 64741-50-0
127-18-4
75-09-2
71-55-6
61790-14-5
64742-95-6 |
|
PLASTIC
| 108-88-3
71-55-6
75-09-2 |
|
ALUMINUM OXIDE,FINE POWDER,99.8%,26549-7
| 1344-28-1 |
|
MOLYBDENUM(VI) OXIDE,99+%,(22181-3)
| 1313-27-5 |
|
ANTIMONY(III) OXIDE,99.999%,(20264-9)
| 1309-64-4 |
|
FLEXANE FL-10 PRIMER
| 108-10-1
108-88-3
67-63-0
64-17-5
9003-35-4 |
|
ULTRACOLOR BLEACH
| 1333-82-0
7664-93-9 |
|
ANTIMONY(V) OXIDE,99.999%,(25599-8)
| 1314-60-9 |
|
BONDMASTER M24I (86-3001,84-3011) PART A
| 1305-78-8
78-93-3 |
|
LATEX VINYL PRIMER SEALER,8-225
| 107-21-1
67-56-1
124-68-5 |
|
MAGNAMITE GRAPHITE (CARBON) FIBER (SUP DATA)
| 7440-44-0 |
|
CARBON TEXTILE PRODUCTS RAYON (SUP DATA)
| 7440-44-0 |
|
FIRE-CONTROL ABD*P
| |
|
FIRE-CONTROL ABD*G
| |
|
HIGHLY SATURATED NITRILE RUBBER (SUP DATA)
| |
|
ISOBUTYL NICLATE & ISOBUTYL (SEE SUPP DATA)
| 15317-78-9
8012-95-1 |
|
NEOPRENE SYNTHETIC RUBBER,WRT
| 14807-96-6 |
|
POLY-DISPERSION GND-75
| 96-45-7
61788-76-9 |
|
POLY-DISPERSION GRD-90
| 1314-41-6
61788-76-9 |
|
CAB-O-SIL (R) TS-720
| 67762-90-7 |
|
HI-TEX TEXTILE PRODUCTS EPOXY (SEE SUP DATA)
| 7440-44-0 |
|
SF-86 OLD 1 DEVELOPER
| 1333-86-4
8002-74-2 |
|
THORNEL CARBON FIBER T-300
| 7440-44-0 |
|
CARBOFLEX MAT
| 7440-44-0 |
|
THORNEL WCA (RAYON-BASED) CARBON (SUP DATA)
| 7440-44-0 |
|
THORNEL CARBON FIBER P-75 PITCH (SUP DATA)
| 7440-44-0 |
|
ZINC-SELE COLD GALVANIZING COMPOUND 7785
| 8052-41-3
68476-86-8
1330-20-7
108-88-3 |
|
|