===================== Product Identification =====================
MSDS NAME:NEOPRENE SYNTHETIC RUBBER,WRT
NIIN:00N011090
MSDS Number: BJJTJ
=== Responsible Party ===
Company:E.I.DUPONT DE NEMOURS & CO,POLYMER PROD DEPT
Address:1007 MARKET STREET
City:WILMINGTON
State:DE
ZIP:19898
Country:US
Info Phone Num:800-441-7515
Emergency Phone Num:800-441-3637;800-441-7515
Preparer's Name:W.C.PERCIVAL
CAGE:DO229
=== Contractor Identification ===
Company:E I DU PONT DE NEMOURS & CO INC
Address:F & FP DEPARTMENT
Box:City:WILMINGTON
State:DE
ZIP:19898
Phone:(800) 441-7515
CAGE:77966
Company:E.I.DUPONT DE NEMOURS & CO INC
Address:549 ALBANY STREET
Box:1635
City:BOSTON
State:MA
ZIP:02118
Phone:800-441-7515
CAGE:DO229
Company:R. T. VANDERBILT CO INC
Address:30 WINFIELD STREET
Box:5150
City:NORWALK
State:CT
ZIP:06855
Country:US
Phone:203-853-1400
CAGE:1N612
============= Composition/Information on Ingredients =============
Name:TALC (CONTAINING NO ASBESTOS)
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: 1%
Other REC Limits:N/K
OSHA PEL:2 MG/M3 RDUST
ACGIH TLV:2 MG/M3 RDUST; 9192
===================== Hazards Identification =====================
LD50 LC50 Mixture:(SEE SUPP DATA)
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NO CHRONIC EFFECTS ARE KNOWN.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:MECHANICAL IRRIT FROM DUST.FUMES MAY BE
PRODUCED AT >200C,392F;CAUSING
IRRIT,REDNESS,TEARING,ITCHING.SKIN:NO REACTION
PREDICTED.INGESTION:PREDICT LOW TOXICITY.INHALATION:DUST MAY CAUSE
SORE THROA T,PAIN IN LUNGS & CHEST.AT >200C,392F,FUMES MAY BE
PRODUCED WHICH ARE IRRIT TO NOSE & THROAT (CAUSING SORENESS,COUGH).
Medical Cond Aggravated by Exposure:NONE ARE KNOWN.
======================= First Aid Measures =======================
Eyes:FLUSH WITH WATER FOR AT LEAST 15 MIN.CONSULT
MD.SKIN:WASH WITH SOAP AND WATER.INGESTION:CALL MD IMMEDIATELY
.INHALATION:IF EXPOSED TO FUMES FROM OVERHEATING OR COMBUSTION,MOVE
TO FRESH AIR. CONSULT MD.
===================== Fire Fighting Measures =====================
Flash Point Method:OC
Flash Point:>260C,500F
Lower Limits:N/K
Upper Limits:N/K
Extinguishing Media:WATER,CARBON DIOXIDE,FOAM,DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT FOR ACIDIC HYDROGEN CHLORIDE FUMES.SOLID
POLYMER COMBUSTED ONLY WITH DIFFICULTY.
Unusual Fire/Explosion Hazard:POURING CHIPS BUILDS UP ELECTROSTATIC
CHARGE.REC GROUNDED EQUIP.HAZ DEC PROD:HCL,CO*2,H*2O;CO,HYDROGEN
OXIDATION PRODUCTS INCL ORGANIC ACIDS,ALDEHYDES,ALCOHOLS.
================== Accidental Release Measures ==================
Spill Release Procedures:SWEEP UP TO AVOID SLIPPING HAZARD.
Neutralizing Agent:N/K
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN COOL,DRY AREA.KEEP CONTAINERS
CLOSED TO PREVENT CONTAMINATION.
Other Precautions:AQUATIC TOXICITY IS EXPECTED TO BE LOW BASED ON THE
POLYMER'S NEGLIGIBLE WATER SOLUBILITY.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NOT REQUIRED IF LOCAL VENTILATION IS ADEQUATE.
Ventilation:LOCAL VENTILATION SHOULD BE USED OVER PROCESSING EQUIPMENT.
Protective Gloves:SHOULD BE WORN IF HANDLING HOT POLYMER.
Eye Protection:SAFETY GLASSES ARE RECOMMENDED.
Other Protective Equipment:LONG SLEEVE SHIRT SHOULD BE WORN WHEN
HANDLING HOT POLYMER.
Work Hygienic Practices:N/K
Supplemental Safety and Health
LD50-LC50 MIX:LD50 RAT ORAL >20,000 MG/KG (FOR ONE TYPE OF
NEOPRENE,OTHER TYPES OF NEOPRENE ARE PREDICTED TO HAVE THE SAME LOW
TOXICITY).ROUTES OF ENTRY:INHALATION/SKIN/INGESTION .
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/K
Vapor Density:N/K
Evaporation Rate & Reference:N/K
Solubility in Water:NEGLIGIBLE
Appearance and Odor:OFF-WHITE TO TAN CHIPS WITH MILD,CHARACTERISTIC
ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE ARE KNOWN.
Stability Condition to Avoid:TEMPERATURES ABOVE 200C,392F.
Hazardous Decomposition Products:CO,HCL AND HYDROGEN OXIDATION PRODUCTS
INCLUDING ORGANIC ACIDS,ALDEHYDES,AND ALCOHOLS.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
==================== Disposal Considerations ====================
Waste Disposal Methods:INCINERATE OR LANDFILL IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
SAFE-T-QUENCH 2
| 7632-00-0 |
|
MICROTRAK REAGENTS,ADVANCE REAGENTS
| 26628-22-8 |
|
BLACK BLAST
| |
|
STD HERPES DIRECT SPECIMEN TEST (SUP DATA)
| 67-64-1 |
|
VINYL MASTIC WEATHER BARRIER (WC-1,COLORS)
| 108-05-4
107-41-5
107-21-1
115-96-8
61788-76-9 |
|
DEEP FREEZE ENAMEL,WHITE,0208W001S
| 67-63-0 |
|
RIMLEASE PRIMER (FK5575)
| 64742-48-9
76-13-1 |
|
HEAVY DUTY 30
| 7440-66-6 |
|
NORTHWIND
| 34590-94-8
6834-92-0 |
|
SPEEDRY DO YELLOW 2017 MARKERS
| 107-98-2
67-63-0
141-78-6
64-17-5
7440-47-3 |
|
EMIT DIGOXIN SERUM PRETREATMENT RGNT,6H419
| 7732-18-5
1310-73-2 |
|
FLO-KLEEN,6A942
| 141-43-5 |
|
FLOW CELL CLEANING SOLUTION A,3AO58
| 7647-01-0
7732-18-5 |
|
ADVANCE DIGOXIN PRETREATMENT REAGENT,PART A
| 10058-23-8 |
|
ADVANCE DIGOXIN BUFFER ADDITIVE,PART B
| 7757-83-7 |
|
STEAMSOL
| 34590-94-8
6834-92-0 |
|
POLYAMIDE RESIN,388-390
| |
|
EMIT & ADVANCE CALIBRATORS & CONTROLS,PT D
| |
|
PERMA-LOK HL 039;FORMERLY KNOWN (SUP DATA)
| 81-07-2
80-15-9
868-77-9
109-17-1 |
|
ADH 1177
| 78-93-3
64742-48-9
1309-48-4
108-88-3 |
|
DEFOMER 1888
| 111-76-2 |
|
ALODINE 1200 TONER 2
| 7697-37-2
7664-39-3
7440-47-3 |
|
RS-1M BLACK
| 111-76-2
123-42-2
67-63-0 |
|
HANDI-LUBE HEAVY (AEROSOL)
| 64741-50-0
127-18-4
75-09-2
71-55-6
61790-14-5
64742-95-6 |
|
PLASTIC
| 108-88-3
71-55-6
75-09-2 |
|
ALUMINUM OXIDE,FINE POWDER,99.8%,26549-7
| 1344-28-1 |
|
MOLYBDENUM(VI) OXIDE,99+%,(22181-3)
| 1313-27-5 |
|
ANTIMONY(III) OXIDE,99.999%,(20264-9)
| 1309-64-4 |
|
FLEXANE FL-10 PRIMER
| 108-10-1
108-88-3
67-63-0
64-17-5
9003-35-4 |
|
ULTRACOLOR BLEACH
| 1333-82-0
7664-93-9 |
|
ANTIMONY(V) OXIDE,99.999%,(25599-8)
| 1314-60-9 |
|
BONDMASTER M24I (86-3001,84-3011) PART A
| 1305-78-8
78-93-3 |
|
LATEX VINYL PRIMER SEALER,8-225
| 107-21-1
67-56-1
124-68-5 |
|
MAGNAMITE GRAPHITE (CARBON) FIBER (SUP DATA)
| 7440-44-0 |
|
CARBON TEXTILE PRODUCTS RAYON (SUP DATA)
| 7440-44-0 |
|
FIRE-CONTROL ABD*P
| |
|
FIRE-CONTROL ABD*G
| |
|
HIGHLY SATURATED NITRILE RUBBER (SUP DATA)
| |
|
ISOBUTYL NICLATE & ISOBUTYL (SEE SUPP DATA)
| 15317-78-9
8012-95-1 |
|
NEOPRENE SYNTHETIC RUBBER,WRT
| 14807-96-6 |
|
POLY-DISPERSION GND-75
| 96-45-7
61788-76-9 |
|
POLY-DISPERSION GRD-90
| 1314-41-6
61788-76-9 |
|
CAB-O-SIL (R) TS-720
| 67762-90-7 |
|
HI-TEX TEXTILE PRODUCTS EPOXY (SEE SUP DATA)
| 7440-44-0 |
|
SF-86 OLD 1 DEVELOPER
| 1333-86-4
8002-74-2 |
|
THORNEL CARBON FIBER T-300
| 7440-44-0 |
|
CARBOFLEX MAT
| 7440-44-0 |
|
THORNEL WCA (RAYON-BASED) CARBON (SUP DATA)
| 7440-44-0 |
|
THORNEL CARBON FIBER P-75 PITCH (SUP DATA)
| 7440-44-0 |
|
ZINC-SELE COLD GALVANIZING COMPOUND 7785
| 8052-41-3
68476-86-8
1330-20-7
108-88-3 |
|
|