===================== Product Identification =====================
MSDS NAME:POLYAMIDE RESIN,388-390
NIIN:00N010900
MSDS Number: BJJRT
=== Responsible Party ===
Company:SCIENTIFIC POLYMER PRODUCTS,INC.
Address:6265 DEAN PARKWAY
City:ONTARIO
State:NY
ZIP:14519
Info Phone Num:716-265-0413
Emergency Phone Num:716-265-0413
CAGE:SCIEN
=== Contractor Identification ===
Company:SCIENTIFIC POLYMER PRODUCTS,INC.
Address:6265 DEAN PARKWAY
Box:City:ONTARIO
State:NY
ZIP:14519
Phone:716-265-0413
CAGE:SCIEN
============= Composition/Information on Ingredients =============
Name:POLYAMIDE RESINS
Fraction by Wt: 100%
Other REC Limits:N/K
OSHA PEL:N/K
ACGIH TLV:N/K
===================== Hazards Identification =====================
LD50 LC50 Mixture:LD50 RAT ORAL 15 G/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EXTREME INHALATION OF VAPORS CAN CAUSE
DEATH BY PARALYSIS OF THE RESPIRATORY CENTER.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:IRRITATING.MOLTEN RESIN CAN CAUSE SEVERE
BURNS.SKIN:MOLTEN RESIN CAN CAUSE SEVERE BURNS.INGESTION:MOLTEN
RESIN CAN CAUSE SEVERE BURNS.INHALATION:RESPIRATORY
IRRITANT.HEADACHE,TIREDNESS AND NAUSEA .EXTREME INHALATION CAN
CAUSE DEATH.
Medical Cond Aggravated by Exposure:N/K
======================= First Aid Measures =======================
First Aid:ALL CASES:IF IRRIT DEVELOPS,SEEK MED HELP.EYES:FLUSH W/ H*2O
FOR AT LEAST 15 MIN.CONT W/ MOLTEN RESIN:IMMED COOL W/ COLD H*20.DO
NOT REMOVE RESIN.GET MED HELP FOR REMOVAL.SKIN:WASH W/ SOAP & H*2O
FOR 15 MIN.REMOVE CONTAM CLTHG.CONT W/ MOLTEN RESIN:IMMED COOL W/
COLD H*2O.DO NOT REMOVE RESIN.GET MED HELP FOR REMOVAL.INGEST:CALL
MD IMMED .INHAL:MOVE FROM EXPOS.BRTHG STOPS:GIVE MOUTH-TO-MOUTH.
===================== Fire Fighting Measures =====================
Flash Point:N/A (NON-VOLAT)
Lower Limits:N/K
Upper Limits:N/K
Extinguishing Media:WATER,CO*2,DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:N/K
================== Accidental Release Measures ==================
Spill Release Procedures:PICK UP SPILLED MATERIAL AND
CONTAINERIZE.VACUUM AREA OR FLUSH WITH WATER TO REMOVE RESIDUE.
Neutralizing Agent:N/K
====================== Handling and Storage ======================
Handling and Storage Precautions:GOOD HYGIENE PRACTICES SHOULD BE
STRICTLY FOLLOWED.FOR LABORATORY USE ONLY.NOT TO BE SOLD/NOT
INTENDED FOR DRUG,HOUSEHOLD,OTHER USES.
Other Precautions:STATIC DISCHARGE POSS.IN PRESENCE OF FLAM OR COMBUST
LIQ,MINIMIZE CHANCE OF IGNIT BY GROUNDING,INERTING,ETC.MOLTEN RESIN
MAY CAUSE SEV BURNS.IF SKIN/EYE CONTACT OCCURS,IMMED COOL W/ COLD
H*2O.DO NOT R EMOVE RESIN.GET MED HELP FOR REMOVAL.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
CONCENTRATION BELOW LEVEL OF CONCERN .
Protective Gloves:IMPERVIOUS
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYEBATH AND/OR SAFETY SHOWER.
Work Hygienic Practices:GOOD HYGIENE PRACTICES SHOULD BE STRICTLY
FOLLOWED.
Supplemental Safety and Health
MP:127-137F,53-58C.ROUTES OF ENTRY:INHALATION/SKIN/INGESTION .
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:N/K
Melt/Freeze Pt:M.P/F.P Text:SEE SUPP
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/K
Vapor Density:N/K
Spec Gravity:0.90 (WATER=1)
Evaporation Rate & Reference:N/K
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SOLID,DICED,LIGHT AMBER PARTICLES WITH SLIGHT
RESINOUS ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
N/K
Stability Condition to Avoid:N/K
Hazardous Decomposition Products:N/K
Conditions to Avoid Polymerization:WILL NOT OCCUR.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
SAFE-T-QUENCH 2
| 7632-00-0 |
|
MICROTRAK REAGENTS,ADVANCE REAGENTS
| 26628-22-8 |
|
BLACK BLAST
| |
|
STD HERPES DIRECT SPECIMEN TEST (SUP DATA)
| 67-64-1 |
|
VINYL MASTIC WEATHER BARRIER (WC-1,COLORS)
| 108-05-4
107-41-5
107-21-1
115-96-8
61788-76-9 |
|
DEEP FREEZE ENAMEL,WHITE,0208W001S
| 67-63-0 |
|
RIMLEASE PRIMER (FK5575)
| 64742-48-9
76-13-1 |
|
HEAVY DUTY 30
| 7440-66-6 |
|
NORTHWIND
| 34590-94-8
6834-92-0 |
|
SPEEDRY DO YELLOW 2017 MARKERS
| 107-98-2
67-63-0
141-78-6
64-17-5
7440-47-3 |
|
EMIT DIGOXIN SERUM PRETREATMENT RGNT,6H419
| 7732-18-5
1310-73-2 |
|
FLO-KLEEN,6A942
| 141-43-5 |
|
FLOW CELL CLEANING SOLUTION A,3AO58
| 7647-01-0
7732-18-5 |
|
ADVANCE DIGOXIN PRETREATMENT REAGENT,PART A
| 10058-23-8 |
|
ADVANCE DIGOXIN BUFFER ADDITIVE,PART B
| 7757-83-7 |
|
STEAMSOL
| 34590-94-8
6834-92-0 |
|
POLYAMIDE RESIN,388-390
| |
|
EMIT & ADVANCE CALIBRATORS & CONTROLS,PT D
| |
|
PERMA-LOK HL 039;FORMERLY KNOWN (SUP DATA)
| 81-07-2
80-15-9
868-77-9
109-17-1 |
|
ADH 1177
| 78-93-3
64742-48-9
1309-48-4
108-88-3 |
|
DEFOMER 1888
| 111-76-2 |
|
ALODINE 1200 TONER 2
| 7697-37-2
7664-39-3
7440-47-3 |
|
RS-1M BLACK
| 111-76-2
123-42-2
67-63-0 |
|
HANDI-LUBE HEAVY (AEROSOL)
| 64741-50-0
127-18-4
75-09-2
71-55-6
61790-14-5
64742-95-6 |
|
PLASTIC
| 108-88-3
71-55-6
75-09-2 |
|
ALUMINUM OXIDE,FINE POWDER,99.8%,26549-7
| 1344-28-1 |
|
MOLYBDENUM(VI) OXIDE,99+%,(22181-3)
| 1313-27-5 |
|
ANTIMONY(III) OXIDE,99.999%,(20264-9)
| 1309-64-4 |
|
FLEXANE FL-10 PRIMER
| 108-10-1
108-88-3
67-63-0
64-17-5
9003-35-4 |
|
ULTRACOLOR BLEACH
| 1333-82-0
7664-93-9 |
|
ANTIMONY(V) OXIDE,99.999%,(25599-8)
| 1314-60-9 |
|
BONDMASTER M24I (86-3001,84-3011) PART A
| 1305-78-8
78-93-3 |
|
LATEX VINYL PRIMER SEALER,8-225
| 107-21-1
67-56-1
124-68-5 |
|
MAGNAMITE GRAPHITE (CARBON) FIBER (SUP DATA)
| 7440-44-0 |
|
CARBON TEXTILE PRODUCTS RAYON (SUP DATA)
| 7440-44-0 |
|
FIRE-CONTROL ABD*P
| |
|
FIRE-CONTROL ABD*G
| |
|
HIGHLY SATURATED NITRILE RUBBER (SUP DATA)
| |
|
ISOBUTYL NICLATE & ISOBUTYL (SEE SUPP DATA)
| 15317-78-9
8012-95-1 |
|
NEOPRENE SYNTHETIC RUBBER,WRT
| 14807-96-6 |
|
POLY-DISPERSION GND-75
| 96-45-7
61788-76-9 |
|
POLY-DISPERSION GRD-90
| 1314-41-6
61788-76-9 |
|
CAB-O-SIL (R) TS-720
| 67762-90-7 |
|
HI-TEX TEXTILE PRODUCTS EPOXY (SEE SUP DATA)
| 7440-44-0 |
|
SF-86 OLD 1 DEVELOPER
| 1333-86-4
8002-74-2 |
|
THORNEL CARBON FIBER T-300
| 7440-44-0 |
|
CARBOFLEX MAT
| 7440-44-0 |
|
THORNEL WCA (RAYON-BASED) CARBON (SUP DATA)
| 7440-44-0 |
|
THORNEL CARBON FIBER P-75 PITCH (SUP DATA)
| 7440-44-0 |
|
ZINC-SELE COLD GALVANIZING COMPOUND 7785
| 8052-41-3
68476-86-8
1330-20-7
108-88-3 |
|
|