===================== Product Identification =====================
MSDS NAME:PERMA-LOK HL 039;FORMERLY KNOWN (SUP DATA)
NIIN:00N010913
MSDS Number: BJJRX
=== Responsible Party ===
Company:PERMABOND INTERNATIONAL
Address:480 SOUTH DEAN STREET
City:ENGLEWOOD
State:NJ
ZIP:07631-9990
Info Phone Num:201-567-9494;800-526-4741
Emergency Phone Num:201-685-5000;800-424-9300-CHEMTREC
Preparer's Name:PHILIP A LOREANO
CAGE:61078
=== Contractor Identification ===
Company:PERMABOND INTERNATIONAL,DIV NATIONAL STARCH & CHEM
Address:480 S. DEAN ST.
Box:City:ENGLEWOOD
State:NJ
ZIP:07631
Country:US
Phone:201-685-5000
CAGE:61078
============= Composition/Information on Ingredients =============
Name:SACCHARIN (SARA III)
CAS:81-07-2
RTECS #:DE4200000
Fraction by Wt: 1%
Other REC Limits:N/K
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS
Name:1-METHYL-1-PHENYLETHYL HYDROPEROXIDE (CUMENE HYDROPEROXIDE)
(SARA III)
CAS:80-15-9
RTECS #:MX2450000
Fraction by Wt: 3%
Other REC Limits:N/K
EPA Rpt Qty:10 LBS
DOT Rpt Qty:10 LBS
Name:HYDROXYETHYL METHACRYLATE
CAS:868-77-9
RTECS #:OZ4725000
Fraction by Wt: 15%
Other REC Limits:N/K
OSHA PEL:N/K
ACGIH TLV:N/K
Name:TETRAETHYLENEGLYCOL DIMETHACRYLATE
CAS:109-17-1
RTECS #:OZ4000000
Fraction by Wt: 70%
Other REC Limits:N/K
OSHA PEL:N/K
ACGIH TLV:N/K
===================== Hazards Identification =====================
LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:MAJOR HEALTH HAZARD IS POTENTIAL FOR
SENSITIZATION WHICH MAY OCCUR IN CERTAIN INDIVIDUALS.
Explanation of Carcinogenicity:SACCHARIN:SUSP HUM/KNOWN ANIM CARCIN
(NTP 1985).INADEQ EVID FOR CARCIN IN HUM/SUFF EVID IN ANIM (IARC
1987).(SEE SUPP)
Effects of Overexposure:EYES:PROLONGED CONTACT WILL CAUSE
IRRITATION.SKIN:PROLONGED CONTACT MAY CAUSE SKIN
IRRIT.SENSITIZATION MAY OCCUR IN CERTAIN INDIVIDUALS.INGESTION:N/K
.INHAL:DOES NOT READILY VAPORIZE,HOWEVE R IN VAPOR OR MIST FORM MAY
CAUSE IRRITATION TO RESPIRATORY TRACT.
Medical Cond Aggravated by Exposure:N/K
======================= First Aid Measures =======================
Eyes:HOLD EYE OPEN AND FLUSH W/ PLENTY OF WATER FOR AT LEAST
15 MIN.CONSULT MD.SKIN:WASH WITH SOAP & WATER.CONSULT MD IF RASH
DEVELOPS.INGESTION:DO NOT INDUCE VOMITING.IF CONSCIOUS,GIVE WARM
WATER AND GET IMMEDIATE MEDICAL ATTENTION.INHALATION:MOVE TO FRESH
AIR.GIVE OXYGEN OR ARTIFICIAL RESPIRATION IF NEEDED.CONSULT MD.
===================== Fire Fighting Measures =====================
Flash Point Method:SCC
Flash Point:230F,110C
Extinguishing Media:FOAM,CO*2,DRY CHEMICAL,WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:OVEREXPOS TO DECOMP PROD (CO,CO*2,NO*X &
OTHER ORGANIC CMPDS) MAY BE HEALTH HAZ.LRG AMTS COULD UNDERGO
VIOLENT POLYMERIZATION GENERATING SIGNIFICANT HEAT/PRESS.
================== Accidental Release Measures ==================
Spill Release Procedures:WEAR PROTECTIVE CLOTHING.DIKE & ABSORB W/
INERT MATL SUCH AS NU-DRI.CAUTION:IN BULK QUANTITIES,PRODUCT
ABSORBED ON INERT MATERIAL MAY POLYMERIZE GENERATING SIGNIFICANT
HEAT.MAY BE NECESSARY TO VENT DI SPOSAL CONTAINERS TO AVOID BUILDUP
OF PRESSURE.
Neutralizing Agent:N/K
====================== Handling and Storage ======================
Handling and Storage Precautions:READ INSTRUCTION SHEET CAREFULLY.STORE
IN COOL LOCATION OUT OF DIRECT SUNLIGHT.AVOID SKIN & EYE
CONTACT.SPRAY OR MISTS PRESENT INHALATION HAZARD.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.FOR INDUSTRIAL USE
ONLY.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
CONCENTRATION BELOW LEVEL OF CONCERN .
Protective Gloves:POLYETHYLENE OR RUBBER.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AS REQUIRED TO PROTECT CLOTHING.
Work Hygienic Practices:N/K
Supplemental Safety and Health
PART NO:AS STAY-LOK NO 800 BOSTIC DIVISION,(EMHART CORPORATION).BASED
ON METHACRYLATE ESTERS:VP:0.01 MMHG @ 77F,25C;VAPOR DENSITY:1.01
(AIR=1).ENTRY RTE:INHAL/SKIN/INGEST .EXPLAN OF CARCIN:SACCH ARIN IS
POTENTIAL CARCINOGEN WHEN INGESTED ONLY (MFR).VISCOSITY:150 CPS.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:POLYMERIZES
Decomp Temp:Decomp Text:N/K
Vapor Pres:SEE SUPP
Vapor Density:SEE SUPP
Spec Gravity:1.07 (WATER=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:RED LIQUID WITH MILD,PLEASANT ODOR.
Percent Volatiles by Volume:<1
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
METALS OR THEIR SALTS.
Stability Condition to Avoid:TEMPERATURES >80C,176F.
Hazardous Decomposition Products:CO,CO*2,NITROGEN OXIDES AND OTHER
UNKNOWN ORGANIC COMPOUNDS.
Conditions to Avoid Polymerization:TEMP >80C,176F,CONTAMINATION BY
METALS AND THEIR SALTS,PERMABOND ANAEROBIC SURFACE CONDITIONERS.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE & LOCAL REGULATIONS .DO NOT POUR DOWN DRAIN.INCIN IF
IAW ALL AIR POLLUTION CONTROL REGULATIONS.CAN CAREFULLY SOLIDIFY W/
ANAEROBIC SURFACE CONDI TIONER & DISP OF AS NON-HAZ SOLID
WASTE.LANDFILL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
SAFE-T-QUENCH 2
| 7632-00-0 |
|
MICROTRAK REAGENTS,ADVANCE REAGENTS
| 26628-22-8 |
|
BLACK BLAST
| |
|
STD HERPES DIRECT SPECIMEN TEST (SUP DATA)
| 67-64-1 |
|
VINYL MASTIC WEATHER BARRIER (WC-1,COLORS)
| 108-05-4
107-41-5
107-21-1
115-96-8
61788-76-9 |
|
DEEP FREEZE ENAMEL,WHITE,0208W001S
| 67-63-0 |
|
RIMLEASE PRIMER (FK5575)
| 64742-48-9
76-13-1 |
|
HEAVY DUTY 30
| 7440-66-6 |
|
NORTHWIND
| 34590-94-8
6834-92-0 |
|
SPEEDRY DO YELLOW 2017 MARKERS
| 107-98-2
67-63-0
141-78-6
64-17-5
7440-47-3 |
|
EMIT DIGOXIN SERUM PRETREATMENT RGNT,6H419
| 7732-18-5
1310-73-2 |
|
FLO-KLEEN,6A942
| 141-43-5 |
|
FLOW CELL CLEANING SOLUTION A,3AO58
| 7647-01-0
7732-18-5 |
|
ADVANCE DIGOXIN PRETREATMENT REAGENT,PART A
| 10058-23-8 |
|
ADVANCE DIGOXIN BUFFER ADDITIVE,PART B
| 7757-83-7 |
|
STEAMSOL
| 34590-94-8
6834-92-0 |
|
POLYAMIDE RESIN,388-390
| |
|
EMIT & ADVANCE CALIBRATORS & CONTROLS,PT D
| |
|
PERMA-LOK HL 039;FORMERLY KNOWN (SUP DATA)
| 81-07-2
80-15-9
868-77-9
109-17-1 |
|
ADH 1177
| 78-93-3
64742-48-9
1309-48-4
108-88-3 |
|
DEFOMER 1888
| 111-76-2 |
|
ALODINE 1200 TONER 2
| 7697-37-2
7664-39-3
7440-47-3 |
|
RS-1M BLACK
| 111-76-2
123-42-2
67-63-0 |
|
HANDI-LUBE HEAVY (AEROSOL)
| 64741-50-0
127-18-4
75-09-2
71-55-6
61790-14-5
64742-95-6 |
|
PLASTIC
| 108-88-3
71-55-6
75-09-2 |
|
ALUMINUM OXIDE,FINE POWDER,99.8%,26549-7
| 1344-28-1 |
|
MOLYBDENUM(VI) OXIDE,99+%,(22181-3)
| 1313-27-5 |
|
ANTIMONY(III) OXIDE,99.999%,(20264-9)
| 1309-64-4 |
|
FLEXANE FL-10 PRIMER
| 108-10-1
108-88-3
67-63-0
64-17-5
9003-35-4 |
|
ULTRACOLOR BLEACH
| 1333-82-0
7664-93-9 |
|
ANTIMONY(V) OXIDE,99.999%,(25599-8)
| 1314-60-9 |
|
BONDMASTER M24I (86-3001,84-3011) PART A
| 1305-78-8
78-93-3 |
|
LATEX VINYL PRIMER SEALER,8-225
| 107-21-1
67-56-1
124-68-5 |
|
MAGNAMITE GRAPHITE (CARBON) FIBER (SUP DATA)
| 7440-44-0 |
|
CARBON TEXTILE PRODUCTS RAYON (SUP DATA)
| 7440-44-0 |
|
FIRE-CONTROL ABD*P
| |
|
FIRE-CONTROL ABD*G
| |
|
HIGHLY SATURATED NITRILE RUBBER (SUP DATA)
| |
|
ISOBUTYL NICLATE & ISOBUTYL (SEE SUPP DATA)
| 15317-78-9
8012-95-1 |
|
NEOPRENE SYNTHETIC RUBBER,WRT
| 14807-96-6 |
|
POLY-DISPERSION GND-75
| 96-45-7
61788-76-9 |
|
POLY-DISPERSION GRD-90
| 1314-41-6
61788-76-9 |
|
CAB-O-SIL (R) TS-720
| 67762-90-7 |
|
HI-TEX TEXTILE PRODUCTS EPOXY (SEE SUP DATA)
| 7440-44-0 |
|
SF-86 OLD 1 DEVELOPER
| 1333-86-4
8002-74-2 |
|
THORNEL CARBON FIBER T-300
| 7440-44-0 |
|
CARBOFLEX MAT
| 7440-44-0 |
|
THORNEL WCA (RAYON-BASED) CARBON (SUP DATA)
| 7440-44-0 |
|
THORNEL CARBON FIBER P-75 PITCH (SUP DATA)
| 7440-44-0 |
|
ZINC-SELE COLD GALVANIZING COMPOUND 7785
| 8052-41-3
68476-86-8
1330-20-7
108-88-3 |
|
|