===================== Product Identification =====================
MSDS NAME:ANTIMONY(V) OXIDE,99.999%,(25599-8)
NIIN:00N010959
MSDS Number: BJJSP
=== Responsible Party ===
Company:ALDRICH CHEMICAL CO
Box:355
City:MILWAUKEE
State:WI
ZIP:53201
Info Phone Num:414-273-3850
Emergency Phone Num:414-273-3850
CAGE:60928
=== Contractor Identification ===
Company:ALDRICH CHEMICAL CO INC
Address:1001 WEST ST PAUL AVE
Box:355
City:MILWAUKEE
State:WI
ZIP:53233
Country:US
Phone:414-273-3850
CAGE:60928
============= Composition/Information on Ingredients =============
Name:ANTIMONY(V) OXIDE
CAS:1314-60-9
RTECS #:CC6300000
Fraction by Wt: 99.999%
Other REC Limits:N/K
OSHA PEL:0.5 MG(SB)/M3
ACGIH TLV:0.5 MG(SB)/M3
===================== Hazards Identification =====================
LD50 LC50 Mixture:LD50 IPR RAT 4 G/KG,MOUSE 978 MG/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY BE HARMFUL BY INHALATION,INGESTION
OR SKIN ABSORPTION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:CAUSES IRRITATION.SKIN:CAUSES
IRRITATION.MAY BE HARMFUL BY ABSORPTION.INGESTION:MAY BE
HARMFUL.EXPOSURE CAN CAUSE STOMACH
PAINS,VOMITING,DIARRHEA.INHALATION:MAY BE HARMFUL.IRRITATING TO
MUCOUS ME MBRANES & UPPER RESPIRATORY TRACT.
Medical Cond Aggravated by Exposure:N/K
======================= First Aid Measures =======================
Eyes:IMMEDIATELY FLUSH W/ COPIOUS AMTS OF WATER FOR AT LEAST
15 MINUTES.CALL MD.SKIN:IMMEDIATELY FLUSH W/ COPIOUS AMTS OF WATER
FOR AT LEAST 15 MINUTES WHILE REMOVING CONTAM CLOTHING & SHOES.CALL
MD.I NGESTION:CONTACT MD IMMEDIATELY .INHALATION:REMOVE TO FRESH
AIR.IF NOT BREATHING GIVE ARTIFICIAL RESPIRATION,PREFERABLY
MOUTH-TO-MOUTH.IF BREATHING IS DIFFICULT GIVE OXYGEN.CALL MD.
===================== Fire Fighting Measures =====================
Flash Point:N/K
Lower Limits:N/K
Upper Limits:N/K
Extinguishing Media:WATER SPRAY
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .PREVENT CONTACT WITH SKIN & EYES.OXIDIZER.
Unusual Fire/Explosion Hazard:CONTACT WITH OTHER MATERIAL MAY CAUSE
FIRE.EMITS TOXIC FUMES UNDER FIRE CONDITIONS.
================== Accidental Release Measures ==================
Spill Release Procedures:EVACUATE AREA.WEAR SCBA,RUBBER BOOTS & HEAVY
RUBBER GLOVES.COVER W/ DRY LIME OR SODA ASH,PICK UP,KEEP IN A
CLOSED CONTAINER & HOLD FOR WASTE DISPOSAL.VENTILATE AREA & WASH
SPILL SITE AFTER MATERIAL PI CKUP IS COMPLETE.
Neutralizing Agent:N/K
====================== Handling and Storage ======================
Handling and Storage Precautions:WEAR RESP,CHEM-RESISTANT GLOVES,SAFETY
GOGGLES,OTHER PROT CLTHG.USE ONLY IN CHEM FUME HOOD.SAFETY SHOWER &
EYE BATH.AVOID BREATHING DUST.
Other Precautions:STORE IN A COOL,DRY PLACE.DO NOT GET IN EYES,ON
SKIN,ON CLOTHING.AVOID PROLONGED OR REPEATED EXPOSURE.WASH
THOROUGHLY AFTER HANDLING.IRRITANT.KEEP TIGHTLY CLOSED.KEEP AWAY
FROM COMBUSTIBLE MATL,HEAT,S PARKS,OPEN FLAME.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
CONCENTRATION BELOW TLV .USE ONLY IN CHEMICAL FUME HOOD.
Protective Gloves:CHEMICAL-RESISTANT
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SAFETY SHOWER & EYE BATH.SPILLS:RUBBER BOOTS
& HEAVY RUBBER GLOVES.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.REMOVE & WASH
CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
ROUTES OF ENTRY:INGESTION/SKIN/INHALATION:.WASTE DISP METH:DESTROY
EXCESS SULFIDE WITH SODIUM HYPOCHLORITE.NEUTRALIZE SOLUTION BEFORE
FLUSHING DOWN DRAIN.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:N/K
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/K
Vapor Density:N/K
Spec Gravity:3.780 (WATER=1)
Evaporation Rate & Reference:N/K
Solubility in Water:N/K
Appearance and Odor:ANTIMONY PENTOXIDE (1314-90-9) IS A WATER-WHITE OR
YELLOWISH POWDER .
================= Stability and Reactivity Data =================
STRONG REDUCING AGENTS,STRONG ACIDS.
Stability Condition to Avoid:N/K
==================== Disposal Considerations ====================
Waste Disposal Methods:DISP MUST BE IN ACCORDANCE W/ FEDERAL,STATE &
LOCAL REGS .DISSOLVE MATL IN WATER/ACID SOLN;OXIDIZE TO WATER-SOL
STATE.PRECIPITATE MATL AS SULFIDE,ADJUST PH TO 7 (COMPLETE
PRECIPITATION).FILTER I NSOLUBLES,DISP OF THEM IN HAZ WASTE
SITE.(SUP DA)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
SAFE-T-QUENCH 2
| 7632-00-0 |
|
MICROTRAK REAGENTS,ADVANCE REAGENTS
| 26628-22-8 |
|
BLACK BLAST
| |
|
STD HERPES DIRECT SPECIMEN TEST (SUP DATA)
| 67-64-1 |
|
VINYL MASTIC WEATHER BARRIER (WC-1,COLORS)
| 108-05-4
107-41-5
107-21-1
115-96-8
61788-76-9 |
|
DEEP FREEZE ENAMEL,WHITE,0208W001S
| 67-63-0 |
|
RIMLEASE PRIMER (FK5575)
| 64742-48-9
76-13-1 |
|
HEAVY DUTY 30
| 7440-66-6 |
|
NORTHWIND
| 34590-94-8
6834-92-0 |
|
SPEEDRY DO YELLOW 2017 MARKERS
| 107-98-2
67-63-0
141-78-6
64-17-5
7440-47-3 |
|
EMIT DIGOXIN SERUM PRETREATMENT RGNT,6H419
| 7732-18-5
1310-73-2 |
|
FLO-KLEEN,6A942
| 141-43-5 |
|
FLOW CELL CLEANING SOLUTION A,3AO58
| 7647-01-0
7732-18-5 |
|
ADVANCE DIGOXIN PRETREATMENT REAGENT,PART A
| 10058-23-8 |
|
ADVANCE DIGOXIN BUFFER ADDITIVE,PART B
| 7757-83-7 |
|
STEAMSOL
| 34590-94-8
6834-92-0 |
|
POLYAMIDE RESIN,388-390
| |
|
EMIT & ADVANCE CALIBRATORS & CONTROLS,PT D
| |
|
PERMA-LOK HL 039;FORMERLY KNOWN (SUP DATA)
| 81-07-2
80-15-9
868-77-9
109-17-1 |
|
ADH 1177
| 78-93-3
64742-48-9
1309-48-4
108-88-3 |
|
DEFOMER 1888
| 111-76-2 |
|
ALODINE 1200 TONER 2
| 7697-37-2
7664-39-3
7440-47-3 |
|
RS-1M BLACK
| 111-76-2
123-42-2
67-63-0 |
|
HANDI-LUBE HEAVY (AEROSOL)
| 64741-50-0
127-18-4
75-09-2
71-55-6
61790-14-5
64742-95-6 |
|
PLASTIC
| 108-88-3
71-55-6
75-09-2 |
|
ALUMINUM OXIDE,FINE POWDER,99.8%,26549-7
| 1344-28-1 |
|
MOLYBDENUM(VI) OXIDE,99+%,(22181-3)
| 1313-27-5 |
|
ANTIMONY(III) OXIDE,99.999%,(20264-9)
| 1309-64-4 |
|
FLEXANE FL-10 PRIMER
| 108-10-1
108-88-3
67-63-0
64-17-5
9003-35-4 |
|
ULTRACOLOR BLEACH
| 1333-82-0
7664-93-9 |
|
ANTIMONY(V) OXIDE,99.999%,(25599-8)
| 1314-60-9 |
|
BONDMASTER M24I (86-3001,84-3011) PART A
| 1305-78-8
78-93-3 |
|
LATEX VINYL PRIMER SEALER,8-225
| 107-21-1
67-56-1
124-68-5 |
|
MAGNAMITE GRAPHITE (CARBON) FIBER (SUP DATA)
| 7440-44-0 |
|
CARBON TEXTILE PRODUCTS RAYON (SUP DATA)
| 7440-44-0 |
|
FIRE-CONTROL ABD*P
| |
|
FIRE-CONTROL ABD*G
| |
|
HIGHLY SATURATED NITRILE RUBBER (SUP DATA)
| |
|
ISOBUTYL NICLATE & ISOBUTYL (SEE SUPP DATA)
| 15317-78-9
8012-95-1 |
|
NEOPRENE SYNTHETIC RUBBER,WRT
| 14807-96-6 |
|
POLY-DISPERSION GND-75
| 96-45-7
61788-76-9 |
|
POLY-DISPERSION GRD-90
| 1314-41-6
61788-76-9 |
|
CAB-O-SIL (R) TS-720
| 67762-90-7 |
|
HI-TEX TEXTILE PRODUCTS EPOXY (SEE SUP DATA)
| 7440-44-0 |
|
SF-86 OLD 1 DEVELOPER
| 1333-86-4
8002-74-2 |
|
THORNEL CARBON FIBER T-300
| 7440-44-0 |
|
CARBOFLEX MAT
| 7440-44-0 |
|
THORNEL WCA (RAYON-BASED) CARBON (SUP DATA)
| 7440-44-0 |
|
THORNEL CARBON FIBER P-75 PITCH (SUP DATA)
| 7440-44-0 |
|
ZINC-SELE COLD GALVANIZING COMPOUND 7785
| 8052-41-3
68476-86-8
1330-20-7
108-88-3 |
|
|