===================== Product Identification =====================
MSDS NAME:HI-TEX TEXTILE PRODUCTS EPOXY (SEE SUP DATA)
NIIN:00N011097
MSDS Number: BJJTP
=== Responsible Party ===
Company:HITCO,MATERIALS DIVISION
Address:1600 WEST 135TH STREET
City:GARDENA
State:CA
ZIP:90249
Info Phone Num:213-321-8080 (8 AM TO 5 PM PST)
Emergency Phone Num:213-321-8080 (8 AM TO 5 PM PST)
CAGE:HO645
=== Contractor Identification ===
Company:HITCO MATERIALS DIV. (ARMCO INC.)
Address:1600 WEST 135TH ST
Box:City:GARDENA
State:CA
ZIP:90249
Phone:419-248-7520, 213-321-8080
CAGE:6S405
Company:HITCO,MATERIALS DIVISION
Address:1600 WEST 135TH STREET
Box:City:GARDENA
State:CA
ZIP:90249
Phone:213-321-8080 (8AM TO 5PM PST)
CAGE:HO645
============= Composition/Information on Ingredients =============
Name:GRAPHITE, SYNTHETIC
CAS:7440-44-0
RTECS #:FF5250100
Fraction by Wt: 95%
Other REC Limits:N/K
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:2 MG/M3 TDUST; 9293
Name:COMPLEX HYDROCARBON "CHAR"
Fraction by Wt: 4%
Other REC Limits:N/K
OSHA PEL:N/K
ACGIH TLV:N/K
Name:COATING
Fraction by Wt: 1%
Other REC Limits:N/K
OSHA PEL:N/K
ACGIH TLV:N/K
===================== Hazards Identification =====================
LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:COATING MAY CAUSE SKIN SENSITIZATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:IRRITATION.SKIN:CARBON FIBERS MAY CAUSE
ITCHING AND IRRITATION CAUSED BY BROKEN FILAMENTS BECOMING IMBEDDED
IN THE SKIN.THE COATING MAY CAUSE SKIN SENSITIZATION.INGESTION:NO
EFFECTS REPORTED.INHA LATION:CARBON & COATING FIBERS MAY CAUSE
IRRITATION TO NOSE,THROAT AND RESPIRATORY TRACT.
Medical Cond Aggravated by Exposure:N/K
======================= First Aid Measures =======================
Eyes:IMMEDIATELY WASH FOR AT LEAST 15 MINUTES WITH LARGE
AMOUNTS OF WATER,OCCASIONALLY LIFTING THE LOWER AND UPPER LIDS.SEEK
MEDICAL ATTENTION.SKIN:REMOVE CONTAMINATED CLOTHING IMMEDIATELY AND
WASH SK IN WITH SOAP OR MILD DETERGENT FOR 5 MINUTES.IF IRRITATION
PERSISTS,SEEK MEDICAL ATTENTION.INHALATION:IMMED REMOVE TO FRESH
AIR.GIVE ARTF RESP IF BREATHING HAS STOPPED,OXYGEN IF NECESSARY.
(SEE SUP)
===================== Fire Fighting Measures =====================
Extinguishing Media:WATER,DIFFICULT TO IGNITE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:HAZARDOUS DECOMPOSITION PRODUCTS:CARBON
MONOXIDE,CARBON DIOXIDE.
================== Accidental Release Measures ==================
Spill Release Procedures:PREVENT SPREAD OF PARTICLES AND AVOID
DUST-GENERATING CONDITIONS.COLLECT BY VACUUM OR WET METHODS,TAKING
CARE NOT TO GENERATE AIRBORNE FIBERS WHICH CAN CAUSE ELECTRICAL
MALFUNCTIONS.
Neutralizing Agent:N/K
====================== Handling and Storage ======================
Handling and Storage Precautions:CARBON FIBERS ARE ELEC CONDUCTIVE &
MAY CAUSE SHORT CIRCUITS RSLTG IN DAMAGE TO ELEC EQUIP.PROTECT
ELECTRICAL EQUIPMENT FROM AIRBORNE CONTAMINATION.
Other Precautions:ATTEMPTS TO INCINERATE MAY CAUSE FIBERS TO BECOME
WIDELY DISPERSED AND RESULT IN FAILURES OF ELECTRICAL EQUIPMENT.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
CONCENTRATION BELOW LEVEL OF CONCERN .
Protective Gloves:RECOMMENDED
Eye Protection:WEAR SAFETY GLASSES.
Other Protective Equipment:WEAR LONG SLEEVES,BARRIER CREAMS MAY ALSO
PROVIDE ADDITIONAL PROTECTION.
Work Hygienic Practices:N/K
Supplemental Safety and Health
PART NO:COMPAT FINISH HI-TEX 33 SERIES,HI-TEX 42 SERIES,HI-TEX 46
SERIES.FIRST AID PROC:GET MEDICAL ATTENTION,IF
NECESSARY.INGESTION:SEEK MEDICAL ATTENTION,IF NECESSARY.ROUTES OF
ENTRY:INGESTION (FP N ).
================== Physical/Chemical Properties ==================
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Appearance and Odor:BLACK TEXTILES,NO ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZER.
Stability Condition to Avoid:N/K
Hazardous Decomposition Products:CARBON MONOXIDE,CARBON DIOXIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
==================== Disposal Considerations ====================
Waste Disposal Methods:WASTE MATERIAL SHOULD BE BAGGED OR CONTAINERIZED
AND BURIED IN A SANITARY LANDFILL IN ACCORDANCE WITH
LOCAL,STATE,AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
SAFE-T-QUENCH 2
| 7632-00-0 |
|
MICROTRAK REAGENTS,ADVANCE REAGENTS
| 26628-22-8 |
|
BLACK BLAST
| |
|
STD HERPES DIRECT SPECIMEN TEST (SUP DATA)
| 67-64-1 |
|
VINYL MASTIC WEATHER BARRIER (WC-1,COLORS)
| 108-05-4
107-41-5
107-21-1
115-96-8
61788-76-9 |
|
DEEP FREEZE ENAMEL,WHITE,0208W001S
| 67-63-0 |
|
RIMLEASE PRIMER (FK5575)
| 64742-48-9
76-13-1 |
|
HEAVY DUTY 30
| 7440-66-6 |
|
NORTHWIND
| 34590-94-8
6834-92-0 |
|
SPEEDRY DO YELLOW 2017 MARKERS
| 107-98-2
67-63-0
141-78-6
64-17-5
7440-47-3 |
|
EMIT DIGOXIN SERUM PRETREATMENT RGNT,6H419
| 7732-18-5
1310-73-2 |
|
FLO-KLEEN,6A942
| 141-43-5 |
|
FLOW CELL CLEANING SOLUTION A,3AO58
| 7647-01-0
7732-18-5 |
|
ADVANCE DIGOXIN PRETREATMENT REAGENT,PART A
| 10058-23-8 |
|
ADVANCE DIGOXIN BUFFER ADDITIVE,PART B
| 7757-83-7 |
|
STEAMSOL
| 34590-94-8
6834-92-0 |
|
POLYAMIDE RESIN,388-390
| |
|
EMIT & ADVANCE CALIBRATORS & CONTROLS,PT D
| |
|
PERMA-LOK HL 039;FORMERLY KNOWN (SUP DATA)
| 81-07-2
80-15-9
868-77-9
109-17-1 |
|
ADH 1177
| 78-93-3
64742-48-9
1309-48-4
108-88-3 |
|
DEFOMER 1888
| 111-76-2 |
|
ALODINE 1200 TONER 2
| 7697-37-2
7664-39-3
7440-47-3 |
|
RS-1M BLACK
| 111-76-2
123-42-2
67-63-0 |
|
HANDI-LUBE HEAVY (AEROSOL)
| 64741-50-0
127-18-4
75-09-2
71-55-6
61790-14-5
64742-95-6 |
|
PLASTIC
| 108-88-3
71-55-6
75-09-2 |
|
ALUMINUM OXIDE,FINE POWDER,99.8%,26549-7
| 1344-28-1 |
|
MOLYBDENUM(VI) OXIDE,99+%,(22181-3)
| 1313-27-5 |
|
ANTIMONY(III) OXIDE,99.999%,(20264-9)
| 1309-64-4 |
|
FLEXANE FL-10 PRIMER
| 108-10-1
108-88-3
67-63-0
64-17-5
9003-35-4 |
|
ULTRACOLOR BLEACH
| 1333-82-0
7664-93-9 |
|
ANTIMONY(V) OXIDE,99.999%,(25599-8)
| 1314-60-9 |
|
BONDMASTER M24I (86-3001,84-3011) PART A
| 1305-78-8
78-93-3 |
|
LATEX VINYL PRIMER SEALER,8-225
| 107-21-1
67-56-1
124-68-5 |
|
MAGNAMITE GRAPHITE (CARBON) FIBER (SUP DATA)
| 7440-44-0 |
|
CARBON TEXTILE PRODUCTS RAYON (SUP DATA)
| 7440-44-0 |
|
FIRE-CONTROL ABD*P
| |
|
FIRE-CONTROL ABD*G
| |
|
HIGHLY SATURATED NITRILE RUBBER (SUP DATA)
| |
|
ISOBUTYL NICLATE & ISOBUTYL (SEE SUPP DATA)
| 15317-78-9
8012-95-1 |
|
NEOPRENE SYNTHETIC RUBBER,WRT
| 14807-96-6 |
|
POLY-DISPERSION GND-75
| 96-45-7
61788-76-9 |
|
POLY-DISPERSION GRD-90
| 1314-41-6
61788-76-9 |
|
CAB-O-SIL (R) TS-720
| 67762-90-7 |
|
HI-TEX TEXTILE PRODUCTS EPOXY (SEE SUP DATA)
| 7440-44-0 |
|
SF-86 OLD 1 DEVELOPER
| 1333-86-4
8002-74-2 |
|
THORNEL CARBON FIBER T-300
| 7440-44-0 |
|
CARBOFLEX MAT
| 7440-44-0 |
|
THORNEL WCA (RAYON-BASED) CARBON (SUP DATA)
| 7440-44-0 |
|
THORNEL CARBON FIBER P-75 PITCH (SUP DATA)
| 7440-44-0 |
|
ZINC-SELE COLD GALVANIZING COMPOUND 7785
| 8052-41-3
68476-86-8
1330-20-7
108-88-3 |
|
|