===================== Product Identification =====================
MSDS NAME:DEFOMER 1888
NIIN:00N010924
MSDS Number: BJJSB
=== Responsible Party ===
Company:INDUSCO CHEMICAL PRODUCTS
Address:1806 SE HOLGATE BOULEVARD
Box:42194
City:PORTLAND
State:OR
ZIP:97242-0194
Info Phone Num:503-236-4167
Emergency Phone Num:503-236-4167
Preparer's Name:RM HALL
CAGE:2Y525
=== Contractor Identification ===
Company:INDUSCO CHEMICAL PRODUCTS
Address:1806 SOUTH EAST HOLGATE BLVD
Box:City:PORTLAND
State:OR
ZIP:97242-0194
Country:US
Phone:503-236-4167
CAGE:2Y525
============= Composition/Information on Ingredients =============
Name:2-BUTOXYETHANOL
CAS:111-76-2
RTECS #:KJ8575000
Fraction by Wt: 12%
Other REC Limits:N/K
OSHA PEL:S, 50 PPM
ACGIH TLV:S, 25 PPM; 9293
Name:MODIFIED POLYETHOXY ADDUCT
Fraction by Wt: 76%
Other REC Limits:N/K
OSHA PEL:N/K
ACGIH TLV:N/K
===================== Hazards Identification =====================
LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NIOSH STUDIES INDICATE 2-BUTOXYETHANOL
HAS CAUSED REPRODUCTIVE DISORDERS IN LABORATORY ANIMALS (RATS OR
MICE) AND MAY HAVE THE POTENTIAL FOR CAUSING SIMILAR DISORDERS IN
HUMANS .FREQUENT CONTACT MAY RESULT IN ABSORPTION IN POTENTIALLY
HARMFUL AMOUNTS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:IRRITATION,BURNING SENSATION.POSSIBLE
CORNEAL INJURY.SKIN:IRRITATION.PENETRATES SKIN.FREQUENT CONTACT MAY
RESULT IN ABSORPTION IN POTENTIALLY HARMFUL AMOUNTS.INGESTION:N/K
.INHALATION: N/K .
Medical Cond Aggravated by Exposure:DERMATITIS.
======================= First Aid Measures =======================
Eyes:RINSE WITH WATER FOR AT LEAST 15 MINUTES.SKIN:RINSE OFF
WITH WATER.INGESTION:CALL MD IMMEDIATELY .INHALATION:REMOVE TO
FRESH AIR.SUPPORT BREATHING (GIVE O*2/ARTIFICIAL RESPIRATION) .
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:APPROX 150F,66C
Extinguishing Media:CO*2 OR DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.HAZARDOUS DECOMPOSITION
PRODUCTS:THERMAL DECOMPOSITION PRODUCTS MAY GENERATE,CO,CO*2,OXIDES
OF NITROGEN.
================== Accidental Release Measures ==================
Spill Release Procedures:MOP AND RINSE WITH WATER TO DRAIN.
Neutralizing Agent:N/K
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE ABOVE 32F,0C AND BELOW 100F,38C.
Other Precautions:NONE
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
CONCENTRATION BELOW TLV .
Protective Gloves:PLASTIC OR RUBBER.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE
Work Hygienic Practices:WASH HANDS AND FACE BEFORE SMOKING OR
EATING.CHANGE CONTAMINATED CLOTHING IMMEDIATELY.
Supplemental Safety and Health
SPEC GRAV:APPROX 0.95 (WATER=1).ROUTES OF ENTRY:EYES,SKIN
(MFR);INHALATION/INGESTION .
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:>180F,82.2C
Melt/Freeze Pt:M.P/F.P Text:NONE
Decomp Temp:Decomp Text:N/K
Vapor Pres:0.88 MMHG
Vapor Density:4.1,AIR=1
Spec Gravity:SEE SUPP DATA
Solubility in Water:INFINITE
Appearance and Odor:GREENISH-YELLOW,CLEAR LIQUID,WITH A SLIGHT SOLVENT
ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING OR REDUCING AGENTS,ACIDS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CO,CO*2,OXIDES OF NITROGEN.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .FLUSH TO SEWER WITH WATER.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
SAFE-T-QUENCH 2
| 7632-00-0 |
|
MICROTRAK REAGENTS,ADVANCE REAGENTS
| 26628-22-8 |
|
BLACK BLAST
| |
|
STD HERPES DIRECT SPECIMEN TEST (SUP DATA)
| 67-64-1 |
|
VINYL MASTIC WEATHER BARRIER (WC-1,COLORS)
| 108-05-4
107-41-5
107-21-1
115-96-8
61788-76-9 |
|
DEEP FREEZE ENAMEL,WHITE,0208W001S
| 67-63-0 |
|
RIMLEASE PRIMER (FK5575)
| 64742-48-9
76-13-1 |
|
HEAVY DUTY 30
| 7440-66-6 |
|
NORTHWIND
| 34590-94-8
6834-92-0 |
|
SPEEDRY DO YELLOW 2017 MARKERS
| 107-98-2
67-63-0
141-78-6
64-17-5
7440-47-3 |
|
EMIT DIGOXIN SERUM PRETREATMENT RGNT,6H419
| 7732-18-5
1310-73-2 |
|
FLO-KLEEN,6A942
| 141-43-5 |
|
FLOW CELL CLEANING SOLUTION A,3AO58
| 7647-01-0
7732-18-5 |
|
ADVANCE DIGOXIN PRETREATMENT REAGENT,PART A
| 10058-23-8 |
|
ADVANCE DIGOXIN BUFFER ADDITIVE,PART B
| 7757-83-7 |
|
STEAMSOL
| 34590-94-8
6834-92-0 |
|
POLYAMIDE RESIN,388-390
| |
|
EMIT & ADVANCE CALIBRATORS & CONTROLS,PT D
| |
|
PERMA-LOK HL 039;FORMERLY KNOWN (SUP DATA)
| 81-07-2
80-15-9
868-77-9
109-17-1 |
|
ADH 1177
| 78-93-3
64742-48-9
1309-48-4
108-88-3 |
|
DEFOMER 1888
| 111-76-2 |
|
ALODINE 1200 TONER 2
| 7697-37-2
7664-39-3
7440-47-3 |
|
RS-1M BLACK
| 111-76-2
123-42-2
67-63-0 |
|
HANDI-LUBE HEAVY (AEROSOL)
| 64741-50-0
127-18-4
75-09-2
71-55-6
61790-14-5
64742-95-6 |
|
PLASTIC
| 108-88-3
71-55-6
75-09-2 |
|
ALUMINUM OXIDE,FINE POWDER,99.8%,26549-7
| 1344-28-1 |
|
MOLYBDENUM(VI) OXIDE,99+%,(22181-3)
| 1313-27-5 |
|
ANTIMONY(III) OXIDE,99.999%,(20264-9)
| 1309-64-4 |
|
FLEXANE FL-10 PRIMER
| 108-10-1
108-88-3
67-63-0
64-17-5
9003-35-4 |
|
ULTRACOLOR BLEACH
| 1333-82-0
7664-93-9 |
|
ANTIMONY(V) OXIDE,99.999%,(25599-8)
| 1314-60-9 |
|
BONDMASTER M24I (86-3001,84-3011) PART A
| 1305-78-8
78-93-3 |
|
LATEX VINYL PRIMER SEALER,8-225
| 107-21-1
67-56-1
124-68-5 |
|
MAGNAMITE GRAPHITE (CARBON) FIBER (SUP DATA)
| 7440-44-0 |
|
CARBON TEXTILE PRODUCTS RAYON (SUP DATA)
| 7440-44-0 |
|
FIRE-CONTROL ABD*P
| |
|
FIRE-CONTROL ABD*G
| |
|
HIGHLY SATURATED NITRILE RUBBER (SUP DATA)
| |
|
ISOBUTYL NICLATE & ISOBUTYL (SEE SUPP DATA)
| 15317-78-9
8012-95-1 |
|
NEOPRENE SYNTHETIC RUBBER,WRT
| 14807-96-6 |
|
POLY-DISPERSION GND-75
| 96-45-7
61788-76-9 |
|
POLY-DISPERSION GRD-90
| 1314-41-6
61788-76-9 |
|
CAB-O-SIL (R) TS-720
| 67762-90-7 |
|
HI-TEX TEXTILE PRODUCTS EPOXY (SEE SUP DATA)
| 7440-44-0 |
|
SF-86 OLD 1 DEVELOPER
| 1333-86-4
8002-74-2 |
|
THORNEL CARBON FIBER T-300
| 7440-44-0 |
|
CARBOFLEX MAT
| 7440-44-0 |
|
THORNEL WCA (RAYON-BASED) CARBON (SUP DATA)
| 7440-44-0 |
|
THORNEL CARBON FIBER P-75 PITCH (SUP DATA)
| 7440-44-0 |
|
ZINC-SELE COLD GALVANIZING COMPOUND 7785
| 8052-41-3
68476-86-8
1330-20-7
108-88-3 |
|
|