===================== Product Identification =====================
MSDS NAME:AMOCO NO. 3 KORITE ASPHALT
NIIN:00N014718
MSDS Number: BKMLW
=== Responsible Party ===
Company:AMOCO OIL CO
Address:200 E RANDOLPH DRIVE
City:CHICAGO
State:IL
ZIP:60601-6401
Country:US
Info Phone Num:312-856-3907
Emergency Phone Num:800-447-8735,800-424-9300(CHEMTREC)
CAGE:15958
=== Contractor Identification ===
Company:AMOCO OIL CO
Address:200 E RANDOLPH DR
Box:City:CHICAGO
State:IL
ZIP:60601-6401
Country:US
Phone:312-856-3907- EM HLTH: 800 447-8735
CAGE:15958
============= Composition/Information on Ingredients =============
Name:PETROLEUM ASPHALT, OXIDIZED. ACGIH TLV AS PETROLEUM ASPHALT
FUMES.
CAS:64742-93-4
ACGIH TLV:5 MG/M3
Name:HYDROGEN SULFIDE (SARA III)
CAS:7783-06-4
RTECS #:MX1225000
OSHA PEL:(C),20 PPM
ACGIH TLV:10 PPM/15 STEL; 9293
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS
Name:SUPP DATA: AMONG OTHERS, SIMILAR TO PROBLEMS CAUSED BY
OTHER NON-SPECIFIC IRRITANTS.
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: HEATED MATERIAL CAN CAUSE THERMAL
BURNS. SKIN: HEATED MATL CAN CAUSE THERMAL BURNS. COLD MATL: NONE
EXPECTED FOR SINGLE SHORT-TERM EXPOSURES. CAN CAUSE SKIN IRRIT ON
PRLNG OR RPTD CONT. INHAL: VA PS CONTAINING HYDROGEN SULFIDE MAY
ACCUMULATE DURING STORAGE OR TRANSPORT OF ASPHALTIC MATLS, (SEE
EFTS OF OVEREXP)
Effects of Overexposure:HLTH HAZ: PARTICULARLY THOSE THAT CONTAIN
LITTLE DILUENT. INGEST: NO SIGNIFICANT HEALTH HAZARDS IDENTIFIED.
PRLNG BRTHG (GREATER THAN ONE HR) OF CONC OF H2S AROUND 50 PPM CAN
PRODUCE EYE & RESP TRACT IRRIT: LEVS OF 250 TO 600 PPM WILL RESULT
IN FLUID IN LUNGS, AND CONC AROUND 1,000 PPM WILL CAUSE UNCON (SEE
SUPP DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:EYE: HOT & COLD MATL: IMMED FLUSH EYES W/ PLENTY OF WATER FOR
AT LEAST 15 MIN, GET MD IMMED. SKIN: HOT MATL: IMMED FLUSH IN COOL
WATER FOR AT LEAST 15 MIN. GET MD IMMED. COLD MATL: CLEAN EXPSD
SKIN W/ WATERLESS HAND CLEANER. INHAL: IF ADVERSE EFTS OCCUR,
REMOVE TO UNCONTAM AREA. GIVE ARTF RESP IF NOT BRTHG. GET MD.
INGEST: IF LRG AMT SWALLOWED, INDUCE VOMIT. GET MD.
===================== Fire Fighting Measures =====================
Flash Point Method:COC
Flash Point:475F,246C
Extinguishing Media:AGENTS APPROVED FOR CLASS B (E.G., DRY CHEM, CO2,
HALOGENATED AGENTS, FOAM, STEAM) OR WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:IF HYDROGEN SULFIDE IS PRESENT, FLAM LIMS
CAN BE FROM 4.3 TO 45.5% BY VOLUME & ITS PRESENCE MAY PROMOTE THE
FORMATION OF PYROPHORIC IRON COMPOUNDS.
================== Accidental Release Measures ==================
Spill Release Procedures:CONTAIN AND REMOVE BY MECHANICAL MEANS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP ADEQ VENT. OUTSIDE STORAGE IS
REC. HYDROGEN SULFIDE (H2S) GAS MAY ACCUM IN STORAGE TANKS & BULK
TRANSPORT COMPARTMENTS CONTAINING ASPHALTS.
Other Precautions:ALWAYS EXERCISE CAUTION WHEN WORKING AROUND CLSD BULK
CNTNRS OF ASPHALTS. WARNING! VAPOR MAY CONTAIN HYDROGEN SULFIDE
(H2S) GAS WHICH CAN BE HARMFUL OR FATAL IF INHALED. HEATED MATL MAY
CAUSE SEVERE B URNS. COLD MATL CAN CAUSE SKIN IRRIT.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:IF OPERATING CONDITIONS CAUSE HIGH VAPOR
CONCENTRATION OR TLV IS EXCEEDED, USE NIOSH/MSHA APPROVED
SUPPLIED-AIR RESPIRATOR.
Ventilation:USE WITH ADEQUATE VENTILATION.
Protective Gloves:PROTECTIVE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
DECOMP PRODS: CO AND/OR CO2 AND OTHER HARMFUL PRODUCTS. EFTS OF
OVEREXP: AND DEATH IN A SHORT PERIOD OF TIME. LAB ANIMALS EXPOSED
TO RPTD APPLICATNS OF ASPHALT MATLS FOR THEIR ENTIRE LIFETIME HAVE
DEV ELOPED SKIN TUMORS PRIMARILY AT THE SITE OF APPLICATN. FINDINGS
INCL BRONCHITIS, PNEUM & ABSCESS FORMATION, (SEE ING 3)
================== Physical/Chemical Properties ==================
HCC:N1
Spec Gravity:1 (WATER = 1)
Solubility in Water:NEG, BELOW 0.1%
Appearance and Odor:DARK BROWN TO BLACK VISCOUS FLUID.
================= Stability and Reactivity Data =================
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:HYDROGEN SULFIDE AND OTHER TOXIC VAPORS
ARE GIVEN OFF AT ROOM TEMPERATURE.
Hazardous Decomposition Products:TOXIC HYDROGEN SULFIDE GAS & OTHER
SULFUR- CONTAINING GASES CAN BE GIVEN OFF WHEN HEATED. BURNING CAN
PRODUCE (SUPP DATA
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE W/APPLICABLE FED,
ST, OR LOC REGS. ENCLSD-CONTROLLED INCIN IS REC UNLESS DIRECTED
OTHERWISE BY APPLICABLE ORDINANCES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|