| MSDS | : | PYROIL ENGINE FLUSH EF-30 | | CAS | : | 111-76-2
123-42-2
91-20-3
95-63-6
1330-20-7
92-52-4
64742-94-5
8008-20-6 | | NAME | : | 2-butoxyethanol (ethylene glycol monobutyl ether), butyl
diacetone alcohol
napthalene; moth flakes; moth balls; naphthalin; camphor
1,2,4-trimethylbenzene
xylene, dimethylbenzene, xylol (iarc - group 3) *95-1*
biphenyl (diphenyl) *95-1*
heavy aromatic solvent naphtha petroleum
kerosene, kerosine (susp animal carc by iarc) *95-1*
|
| |
|
|
===================== Product Identification =====================
MSDS NAME:PYROIL ENGINE FLUSH EF-30
NIIN:00F039701
MSDS Number: BWXLX
=== Responsible Party ===
Company:VALVOLINE OIL CO DIV OF ASHLAND OIL
Address:3499 DABNEY DR
Box:14000
City:LEXINGTON
State:KY
ZIP:40512-5000
Country:US
Info Phone Num:606-264-7000/800-274-5263
Emergency Phone Num:606-264-7000/800-274-5263
CAGE:72527
=== Contractor Identification ===
Company:VALVOLINE OIL CO
Address:3499 BLAZER PKY
Box:14000
City:LEXINGTON
State:KY
ZIP:40512
Country:US
Phone:606-357-7206 / 800-274-5263
CAGE:72527
============= Composition/Information on Ingredients =============
Name:2-BUTOXYETHANOL (ETHYLENE GLYCOL MONOBUTYL ETHER), BUTYL
CELLOSOLVE, BUTYL GLYCOL, GLYCOL ETHER EB
CAS:111-76-2
RTECS #:KJ8575000
Fraction by Wt: 1-5%
Other REC Limits:25 PPM (SKIN)
OSHA PEL:50 PPM (SKIN)
ACGIH TLV:25 PPM (SKIN)
Name:DIACETONE ALCOHOL
CAS:123-42-2
RTECS #:SA9100000
Fraction by Wt: 1-5%
Other REC Limits:50 PPM
OSHA PEL:240 MG/CUM
ACGIH TLV:238 MG/CUM
Name:NAPTHALENE; MOTH FLAKES; MOTH BALLS; NAPHTHALIN; CAMPHOR
TAR; WHITE TAR
CAS:91-20-3
RTECS #:QJ0525000
Fraction by Wt: 11.5%
Other REC Limits:10 PPM
OSHA PEL:50 MG/CUM
ACGIH TLV:52 MG/CUM
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS
Name:1,2,4-TRIMETHYLBENZENE
CAS:95-63-6
RTECS #:DC3325000
Fraction by Wt: 2%
OSHA PEL:25 PPM
ACGIH TLV:25 PPM
Name:XYLENE, DIMETHYLBENZENE, XYLOL (IARC - GROUP 3) *95-1*
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 0.5-1.5%
Other REC Limits:100 PPM
OSHA PEL:100 PPM
ACGIH TLV:100 PPM, SKIN
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:BIPHENYL (DIPHENYL) *95-1*
CAS:92-52-4
RTECS #:DU8050000
Fraction by Wt: 0.4-1.2%
OSHA PEL:0.2 PPM
ACGIH TLV:1.5 MG/CUM
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:HEAVY AROMATIC SOLVENT NAPHTHA PETROLEUM
CAS:64742-94-5
RTECS #:WF3100000
Fraction by Wt: 1-10%
OSHA PEL:100 PPM
Name:KEROSENE, KEROSINE (SUSP ANIMAL CARC BY IARC) *95-1*
CAS:8008-20-6
RTECS #:OA5500000
Fraction by Wt: 85-100%
Other REC Limits:100 MG/CUM NIOSH
OSHA PEL:400 PPM
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. INHALATION: VAPORS
CAN CAUSE NASAL & RESPIRATORY IRRITATION, CENTRAL NERVOUS SYSTEM
EFFECTS & DEATH. INGESTION: GI IRRITATION. SKIN: IRRITATION, BURNS,
SKIN DAMAGE & ABSORPTION IS PO SSIBLE. ASPIRATION OF MATERIAL INTO
THELUNGS DUE TO VOMITING CAN CAUSE CHEMICAL PNEUMONITIS WHICH CAN
BE FATAL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, DIZZINESS, WEAKNESS, FATIGUE,
NAUSEA, HEADACHE, POSSIBLE UNCONSCIOUSNESS, VOMITING, DIARRHEA,
DRYNESS, REDNESS, BURNING, CRACKING.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN DISORDERS.
PRE-EXISTING ORGAN DISORDERS, ANEMIA, LIVER, ABNORMALITIES, KIDNEY
DAMAGE, LUNG DAMAGE, BLOOD ABNORMALITIES, TESTIS DAMAGE, SPLEEN
DAMAGE.
======================= First Aid Measures =======================
First Aid:SKIN: THOROUGHLY WASH EXPOSED AREA W/SOAP & WATER. EYES:
FLUSH W/LARGE AMOUNTS OF WATER. INGESTION: ASPIRATION HAZARD. DON'T
INDUCE VOMITING, KEEP WARM & QUIET. INHALATION: REMOVE TO FRESH
AIR. GIVE O XYGEN/CPR IF NEEDED. KEEP WARM & QUIET.OBTAIN MEDICAL
ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:>120F
Lower Limits:<0.7
Extinguishing Media:REGULAR FOAM/CO2/DRY CHEMICAL
Fire Fighting Procedures:WEAR SCBA W/A FULL FACEPIECE OPERATED IN THE
POSITIVE PRESSURE DEMAND MODE WHEN FIGHTING FIRES.
Unusual Fire/Explosion Hazard:VAPORS ARE > THAN AIR & MAY TRAVEL TO A
DISTANT IGNITION SOURCE. NEVER USE WELDING/CUTTING TORCH ON/NEAR
DRUM BECAUSE PRODUCT CAN IGNITE EXPLOSIVELY.
================== Accidental Release Measures ==================
Spill Release Procedures:SMALL: ABSORB LIQUID ON VERMICULITE, FLOOR
ABSORBENT/OTHER ABSORBENT MATERIAL & TRANSFER TO HOOD. LARGE:
ELIMINATE ALL IGNITION SOURCES. PERSONS NOT WEARING PROTECTIVE
EQUIPMENT SHOULD BE EXCLUDED FR OM AREA/UNTIL CLEANUP HAS BEEN
COMPLETED.(SEE SUPP
====================== Handling and Storage ======================
Handling and Storage Precautions:CONTAINERS OF THIS MATERIAL MAY BE
HAZARDOUS WHEN EMPTIED. SINCE EMPTIED CONTAINERS RETAIN PRODUCT
RESIDUES (VAPOR/LIQUID/SOLID).
Other Precautions:ALL FIVE GALLON PAILS & LARGER METAL CONTAINERS
INCLUDING TANK CARS & TANK TRUCKS SHOULD BE GROUNDED/BONDED WHEN
MATERIAL IS TRANSFERRED.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:A NIOSH/MSHA APPROVED AIR SUPPLIED RESPIRATOR.
OSHA ALSO PERMITS OTHER NIOSH/MSHA RESPIRATORS (NEGATIVE PRESSURE
TYPE) UNDER SPECIFIED CONDITIONS.
Ventilation:MECHANICAL (GENERAL) &/LOCAL EXHAUST TO MAINTAIN EXPOSURE <
TLV'S.
Protective Gloves:NEOPRENE/NITRILE RUBBER
Eye Protection:CHEMICAL SPLASH GOGGLES/SAFETY GLASSES
Other Protective Equipment:IMPERVIOUS CLOTHING & BOOTS
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
LARGE SPILLS CONT'D: STOP AT SOURCE. PREVENT FROM ENTERING DRAINS,
SEWERS, STREAMS/OTHER BODIES OF WATER, PREVENT FROM SPREADING.
PUMP/VACUUM TRANSFER PRODUCT TO CLEAN CONTAINERS FOR RECOVERY.
ABSORB UNRECOVERABLE PRODUCT. TRANSFER CONTAMINATED ABSORBENT,
SOIL & OTHER MATERIALS TO CONTAINERS FOR DISPOSAL.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:>300F
Vapor Pres:5
Vapor Density:>1
Spec Gravity:0.834
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:CLEAR AMBER HOMOGENEOUS LIQUID SOLUTION
Percent Volatiles by Volume:85-100
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:CO2, CO & VARIOUS HYDROCARBONS
==================== Disposal Considerations ====================
Waste Disposal Methods:SMALL: ALLOW VOLATILE PORTION TO EVAPORATE IN
HOOD. ALLOW SUFFICIENT TIME FOR VAPORS TO COMPLETELY CLEAR HOOD
DUCT WORK. DISPOSE OF IAW/FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|