===================== Product Identification =====================
MSDS NAME:MULTI-PURPOSE GEAR LUBRICANT 4140
NIIN:00F039703
MSDS Number: BWXLZ
=== Responsible Party ===
Company:PENNZOIL CO
Address:PENNZOIL PL 700 MILIAM
Box:2967
City:HOUSTON
State:TX
ZIP:77252-2967
Country:US
Info Phone Num:713-546-4000/713-236-6070
Emergency Phone Num:713-546-4000/713-236-6070
CAGE:01326
=== Contractor Identification ===
Company:PENNZOIL CO
Address:700 MILIAM PENNZOIL PL
Box:2967
City:HOUSTON
State:TX
ZIP:77252-2967
Country:US
Phone:800-546-6227
CAGE:01326
============= Composition/Information on Ingredients =============
Name:BASE LUBRICATING OIL MIXTURE
Fraction by Wt: 90-99%
Name:EXTREME PRESSURE ADDITIVE
Fraction by Wt: <5%
Name:POUR POINT DEPRESSANT
Fraction by Wt: <1%
Name:GEAR OIL ADDITIVE
Fraction by Wt: <10%
===================== Hazards Identification =====================
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: CONTACT DERMATITIS, SECONDARY
INFECTION. INGESTION: LAXATIVE PROPERTIES. ON RARE OCCASIONS,
PROLONGED & REPEATED EXPOSURE TO OIL MIST POSES A RISK OF PULMONARY
DISEASE SUCH AS CHRONIC LUNG INFLA MMATION. THIS CONDITION IS
USUALLY ASYMPTOMATIC AS A RESULT OF REPEATED SMALL ASPIRATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:DRYNESS, CHAPPING, REDDENING, OIL ACNE,
BLACKHEADS, PHOTOSENSITIVITY, ABNORMINAL CRAMPS, DIARRHEA,
SHORTNESS OF BREATH, COUGH.
======================= First Aid Measures =======================
Eyes: IMMEDIATELY FLUSH W/LARGE AMOUNTS OF WATER. IF MATERIAL
IS HOT, TREAT FOR THERMAL BURNS. SKIN: WASH THOROUGHLY W/SOAP &
WATER. IF MATERIAL IS HOT, SUBMERGE INJURED AREA IN COLD WATER.
INHALATION : INGESTION: DON'T INDUCE VOMITING. OBTAIN MEDICAL
ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point Method:COC
Flash Point:425F
Extinguishing Media:DRY CHEMICAL, FOAM/CO2
Fire Fighting Procedures:WATER MAY BE INEFFECTIVE BUT CAN BE USED TO
COOL CONTAINERS. CAUTION SHOULD BE EXERCISED WHEN USING WATER/FOAM
AS FROTHING MAY OCCUR.
Unusual Fire/Explosion Hazard:DENSE SMOKE MAY BE GENERATED WHILE
BURNING. AUTOIGNITION TEMP: >900F.
================== Accidental Release Measures ==================
Spill Release Procedures:CONTAIN IMMEDIATELY. DON'T ALLOW TO ENTER
SEWERS/WATERCOURSES. REMOVE IGNITION SOURCES. ABSORB W/APPROPRIATE
INERT MATERIAL. LARGE: MAY BE PICKED UP USING VACUUM
PUMPS/SHOVELS/BUCKETS/OTHER MEANS & P LACE IN DRUMS/SUITABLE
CONTAINERS.
====================== Handling and Storage ======================
Handling and Storage Precautions:DON'T TRANSFER TO UNMARKED CONTAINERS.
STORE IN CLOSED CONTAINERS AWAY FROM HEAT/SPARKS/OPEN
FLAMES/OXIDIZING MATERIALS.
Other Precautions:FIRE EXTINGUISHERS SHOULD BE KEPT READILY AVAILABLE.
CONSUMPTION OF FOOD/BEVERAGE SHOULD BE AVOIDED IN WORK AREAS WHERE
HYDRO CARBONS ARE PRESENT.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NOT REQUIRED UNDER NORMAL USE. IF VAPOR/MIST IS
GENERATED WHEN MATERIAL IS HEATED/HANDLED, USE AN ORGANIC VAPOR
RESPIRATOR W/A DUST/MIST FILTER. ALL RESPIRATORS MUST BE NIOSH
CERTIFIED. DON'T USE COMP RESSED OXYGEN IN HYDROCARBON ATMOSPHERE.
Ventilation:ADEQUATE VENTILATION
Protective Gloves:IMPERVIOUS, INSULATING PROTECTIVE
Eye Protection:PLASTIC FACE SHIELD
Other Protective Equipment:SPLASH PROOF SAFETY GOGGLES, IMPERVIOUS
BOOTS/APRONS, INSULATED PROTECTIVE (BOOTS, APRONS) IF HANDLING HOT
MATERIAL.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. DISPOSE OF CONTAMINATED. WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
LEATHER ARTICLES WHICH CAN'T BE DECONTAMINATED.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:>900F
Melt/Freeze Pt:M.P/F.P Text:>10F
Spec Gravity:0.897
Solubility in Water:INSOLUBLE
Appearance and Odor:OPAQUE-DARK W/MILD SUPHUR ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME
Hazardous Decomposition Products:CO, CO2, OTHER OXIDES.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS. WASTE MATERIAL MAY BE LANDFILLED/INCINERATED AT AN
APPROVED FACILITY. MATERIALS SHOULD BE RECYCLED IF POSSIBLE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|