Search   
MSDS  : SCOTCHWELD STRUCTURAL ADHESIVE 2054-B
CAS  : 2426-08-6
NAME  : bisphenol epoxy resin (the % is appx)
n-butyl glycidyl ether (bge)
===================== Product Identification =====================

MSDS NAME:SCOTCHWELD STRUCTURAL ADHESIVE 2054-B
NIIN:00-159-4972
MSDS Number: BDDCH
=== Responsible Party ===
Company:3M GENERAL OFFICES
Address:3M CENTER
City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Info Phone Num:612-733-1110
Emergency Phone Num:612-733-1110
CAGE:04963
=== Contractor Identification ===
Company:3M MINNESOTA MINING AND MFG CO ADHESIVES SEALERS DIV
Address:3M CTR
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:800-364-3577/651-737-6501(24 HOURS)
CAGE:04963

============= Composition/Information on Ingredients =============

Name:BISPHENOL EPOXY RESIN (THE % IS APPX)
Fraction by Wt: 70.0%

Name:N-BUTYL GLYCIDYL ETHER (BGE)
CAS:2426-08-6
RTECS #:TX4200000
Fraction by Wt: 10.0%
OSHA PEL:50 PPM
ACGIH TLV:25 PPM; 9293

===================== Hazards Identification =====================

Effects of Overexposure:EYES: IRRITATE. SKIN: IRRITANT, MAY CAUSE
SENSITIZATION IN CERTAIN INDIVIDUALS.

======================= First Aid Measures =======================

First Aid:EYE: FLUSH W/ PLENTY OF WATER. CALL A PHYSICIAN. SKIN: WASH
THOROUGHLY W/ SOAP & WATER.

===================== Fire Fighting Measures =====================

Flash Point:>250 C
Extinguishing Media:CO*2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

================== Accidental Release Measures ==================

Spill Release Procedures:COLLECT SPILL MATERIAL. CLEAN UP RESIDUE

====================== Handling and Storage ======================

Handling and Storage Precautions:USE IN WELL VENTILATED AREAS. AVOID
EYE & SKIN CONTACT. WASH HANDS BEFORE SMOKING. WASH CONTAMINATED
CLOTHING BEFORE REUSE.

============= Exposure Controls/Personal Protection =============

Ventilation:LOCAL: RECOMMENDED. MECH: ACCEPTABLE.
Protective Gloves:IMPERVIOUS TYP
Eye Protection:SAFETY GLASSES.
Supplemental Safety and Health

================== Physical/Chemical Properties ==================

HCC:V5
NRC/State Lic Num:NA
Spec Gravity:1.3300
Solubility in Water:SLIGHT
Appearance and Odor:GRAY PASTE

================= Stability and Reactivity Data =================

Stability Indicator/Materials to Avoid:YES

==================== Disposal Considerations ====================

Waste Disposal Methods:CONTAINS METALLIC COMPOUNDS. DO NOT LANDFILL.
DISPOSE IN ACCORDANCE W/ RED., STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
GILLITE 2400 1310-73-2
7722-64-7
FORMED MOLECULAR SIEVE
MOLECULAR SIEVE TYPE 4 A 1313-59-3
112945-52-5
1344-28-1
FERLON 1310-73-2
7732-18-5
ROYCO 783D 64742-53-6
BRAYCO MICRONIC 783E 64742-46-7
1330-78-5
MIL-H-6083D; HYDRAULIC FLUID 74-98-6
75-28-5
AVREX 904 HYDRAULIC FLUID 1330-78-5
ADHESIVE 826 8030-30-6
POSTAL GRAY PRIMER
P-803-66 108-88-3
POSTAL RED 11136
POST OFFICE RED (11136) 108-88-3
1330-20-7
75-09-2
8030-30-6
U.S. POSTAL BLUE
POST OFFICE BLUE (15050) 108-88-3
8030-30-6
1330-20-7
75-09-2
IB 2641 75-09-2
1330-20-7
108-88-3
SS-4155,PRIMER 5593-70-4
8030-30-6
78-10-4
884155 5593-70-4
8030-30-6
78-10-4
A-6
A-40 ADHESIVE,PART B 1332-21-4
EXTERIOR LATEX
ROYCO 808
MIL-L-7808J;LUBRICATING OIL;PROD CODE 25921
BRAYCO 880H (MIL-L-7808G) 78-30-8
CVV ADHESIVE 108-88-3
109-99-9
78-93-3
6549CVV
1549CVV
HEAT TREATING SALT 7631-99-4
7632-00-0
7647-14-5
HEAT TREATING SALT 7631-99-4
7757-79-1
7647-14-5
SCOTCHWELD STRUCTURAL ADHESIVE 2054-A
SCOTCHWELD STRUCTURAL ADHESIVE 2054-B 2426-08-6
PROTACHEM SMO 1338-43-8
GLYCOMUL O 1338-43-8
EMSORB 2500 (SMO)SORBITAN MONO-OLEATE 1338-43-8
SORBITAN MONOOLEATE 1338-43-8
ADIPRENE L-167 URETHANE RUBBER 9009-54-5
584-84-9
ASSEMBLY FLUID NUMBER 1 8012-95-1
2-ETHYLBUTANOL 97-95-0
2-ETHYL BUTANOL 97-95-0
EPOCAST 41-A(RESIN)
ECCOBOND 87H (NF) 75-09-2
71-55-6
108-88-3
108-90-7
67-63-0
75-56-9
A-701 ADHESIVE
PM6003 RESIN
PG-2125,PART A 1317-65-3
13463-67-7
108-88-3
112945-52-5
PG-2125,PART B 111-40-0
56-81-5
108-88-3
67-63-0
90-72-2
F-2 HARDENER 111-40-0
LIQUID HARDENER 0203 111-40-0
112-57-2
68155-17-9
EPON CURING AGENT(R) U, 43638 68610-56-0
111-40-0
108-95-2
EA 913 PART A 1332-21-4
EA 913 PART B 101-77-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net