===================== Product Identification =====================
MSDS NAME:A-6
NIIN:00-159-4846
MSDS Number: BDDBR
=== Responsible Party ===
Company:MORTON THIOKOL,INC;ARMSTRONG PRODUCTS COMPANY
Address:407-ARGONNE ROAD
Box:647
City:WARSAW
State:IN
ZIP:46580-3811
Country:US
Info Phone Num:219-267-3226
Emergency Phone Num:219-267-3226
CAGE:98911
=== Contractor Identification ===
Company:MORTON THIOKOL,INC;ARMSTRONG PRODUCTS COMPANY
Address:407-ARGONNE ROAD
Box:647
City:WARSAW
State:IN
ZIP:46580-3811
Country:US
Phone:219-267-3226
CAGE:98911
============= Composition/Information on Ingredients =============
Name:EPOXY RESIN
Fraction by Wt: 40%
Name:VINYL RESIN
Fraction by Wt: 17%
Name:FILLER
Fraction by Wt: 23%
===================== Hazards Identification =====================
Effects of Overexposure:EYE:MINOR IRRIT. SKIN:POSS SENSITIZER & MINOR
IRRIT:INHAL:POSS PROBLEM WHEN HEATED TO HIGH TEMP.
======================= First Aid Measures =======================
Eyes:FLUSH WIT WATER 15 MINUTES. IF ILL EFFECTS DEVELOP,GET
MD. SKIN:WASH W/SOAP & WATER. REMOVE CONTAMINATED CLOTHING & WASH
THEM BEFORE REUSE. INHAL:REMOVE TO FRESH AIR & GET MD. INGEST:NO
KNOWN ANT IDOTE. TREAT SYMPTOMS. W/LG AMTS INDUCEVOMT.
===================== Fire Fighting Measures =====================
Flash Point:>135F;57C, TCC
Extinguishing Media:FOAM,CO*2 DRY CHEM
================== Accidental Release Measures ==================
Spill Release Procedures:SOAK UP IN ABSORBANT MATERIAL OR SCRAPE UP.
RESIDUAL CAN BE REMOVED WIT NON-FLAMMABLE SOLVENT SUCH AS METHYLENE
CHLORIDE. IF SOLVENT IS USED ADEQ VENTIL IS REQUIRED.
====================== Handling and Storage ======================
Handling and Storage Precautions:PRACTICE CAUTION TO AVOID SKIN AND EYE
CONTACT. AVOID BREATHING VAPORS OF HEATED MATERIALS.
============= Exposure Controls/Personal Protection =============
Ventilation:MECH TO MAINTAIN BELOW THE TLV.
Protective Gloves:YES
Eye Protection:SAFETY GLASSES W/SHIELDS
Other Protective Equipment:BARRIER CREAMS HELPFUL. CLEAN BODY COVERINGS
CLOTHING.
Supplemental Safety and Health
SPEC: TY II. CONTANER: 4 OZ KIT. KEY1:J1.
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:B.P. Text:389F:198C
Spec Gravity:0.96
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GRAY PASTE
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Conditions to Avoid Polymerization:EXCESS OF HARDENER.
==================== Disposal Considerations ====================
Waste Disposal Methods:BURN IN ADEQUATE INCINERATOR OR BURY IN LANDFILL
ALL IAW FEDERAL,STATE AND LOCAL CODES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|