=====================  Product Identification  =====================

MSDS NAME:ANCHOR-IT CR-321 INJECTION RESIN, B COMPONENT
NIIN:00N083547
Kit Part:Y
MSDS Number: CGQYC
=== Responsible Party ===
Company:ADHESIVES TECHNOLOGY INC
Address:4210 B ST NW SUITE D
City:AUBURN
State:WA
ZIP:98001-1717
Country:US
Info Phone Num:206-850-2400
Emergency Phone Num:800-255-3924
CAGE:HO791
=== Contractor Identification ===
Company:ADHESIVES TECHNOLOGY
Box:UNKNOW
CAGE:ATECH
Company:ADHESIVES TECHNOLOGY CORP
Address:8041 S 228TH ST SUITE 101
Box:City:KENT
State:WA
ZIP:98032
Country:US
Phone:206-850-2400
CAGE:HO791

=============  Composition/Information on Ingredients  =============

Name:DIETHYLENETRIAMINE
CAS:111-40-0
RTECS #:IE1225000
OSHA PEL:1 PPM
ACGIH TLV:1 PPM, S

Name:1,2-ETHANEDIAMINE,
    N-(2-AMINOETHYL)-N'-(2-((2-AMINOETHYL)AMINO)ETHYL)-;
    (TETRAETHYLENEPENTAMINE)
CAS:112-57-2
RTECS #:KH8585000
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:TRIETHYLENETETRAMINE
CAS:112-24-3
RTECS #:YE6650000
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:N,N-BIS-(2-AMINOETHYL)-PIPERAZINE
CAS:6531-38-0
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:PIPERARZINYL-ETHYLENEDIAMINE
CAS:24028-46-4
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:TRISAMINOETHYLENETETRAMINE; (TRIS(AMINOETHYL)AMINE MODIFIED
    AMINE REACTION PRODUCT)
CAS:4097-89-6
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE/CHRONIC: NONE SPECIFIED BY
    MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ASTHMA-TYPE CONDITIONS. CHRONIC
    BRONCHITIS, OTHER RESPIRATORY CONDITIONS, AND SKIN ECZEMA.

=======================  First Aid Measures  =======================

First Aid:SKIN: WASH W/WATERLESS HANDCLEANER THEN WARM SOAP & WATER FOR
    15 MINUTES, THEN APPLY PROTECTIVE CREAM. REMOVE CONTAMINATED
    CLOTHING IMMED & WASH SKIN. EYES: CALL MD. FLUSH W/WARM WATER FOR
    AT LEAST 15  MIN. INGESTION: ADMINISTER 3-4 GLASSESOF MILK/WATER.
    DO NOT INDUCE VOMITING. OBTAIN MEDICAL CARE & HOSPITAL TREATMENT
    IMMED. AVOID ASPIRATION OF VOMITED MATERIAL. INHALATION: REMOVE TO
    FRESH AIR.

=====================  Fire Fighting Measures  =====================

Flash Point:200F,93C
Extinguishing Media:FOAM, CARBON DIOXIDE, FOG.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT . AVOID BREATHING VAPORS.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:USE ABSORBENT MATERIAL TO COLLECT AND CONTAIN.
    WASH AREA WITH WARM, SOAPY WATER.
Neutralizing Agent:EPOXY MAY BE CURED W/APPROP CURING AGENT, PROPERLY
    CURED EPOXY IS INERT PLASTIC.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP AWAY FROM OXIDIZERS, HEAT OR
    FLAMES. AVOID STORAGE FOR LONG PERIODS AND IN LARGE QUANTITIES.
    KEEP AWAY FROM ACIDS OR ALKALIS.
Other Precautions:PROTECT CONTAINERS AGAINST PHYSICAL DAMAGE. AVOID
    CONTACT WITH SKIN AND EYES. AVOID BREATHING VAPORS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT REQUIRED UNDER NORMAL CONDITIONS. WHEN
    NECESSARY USE NIOSH APPROVED DISPOSABLE CARTRIDGE RESPIRATORS.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:VINYL GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYEWASH & DELUGE
    SHOWER . WEAR SUITABLE PROTECTIVE CLOTHING, LONG SLEEVES,
    COVERALLS, ETC.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Solubility in Water:VERY LOW
Appearance and Odor:AMBER LIQUID
Percent Volatiles by Volume:NIL

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
    FEDERAL REGULATIONS .

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***