=====================  Product Identification  =====================

MSDS NAME:TTC-1 THINNER
NIIN:00N083576
MSDS Number: CGQYL
=== Responsible Party ===
Company:MULTICORE SOLDERS INC
Address:1751 JAY ELL DR
City:RICHARDSON
State:TX
ZIP:75081
Country:US
Info Phone Num:714-235-1224
Emergency Phone Num:800-424-9300 (CHEMTREC)
Preparer's Name:ROBERT GILBERT
CAGE:0YP31
=== Contractor Identification ===
Company:MULTICORE SOLDERS INC
Address:1751 JAY ELL DR
Box:City:RICHARDSON
State:TX
ZIP:75081
Country:US
Phone:214-238-1224
CAGE:0YP31

=============  Composition/Information on Ingredients  =============

Name:LEAD (SARA 313) (CERCLA)
CAS:7439-92-1
RTECS #:OF7525000
Fraction by Wt: 20-30%
OSHA PEL:SEE 1910.1025
ACGIH TLV:0.15 MG/M3 DUST
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Name:TIN
CAS:7440-31-5
RTECS #:XP7320000
Fraction by Wt: 30-40%
OSHA PEL:2 MG/M3
ACGIH TLV:2 MG/M3

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: WEAKNESS, VOMITING, LOSS OF
    APPETITE, CONVULSIONS, STUPOR AND POSSIBLY COMA. SIGNS & SYMPS OF
    EXPOS: DUST, VAPOR AND/OR FUMES MAY BE IRRITATING TO SKIN, EYES &
    RESPIRATORY SYS. LEAD APPEARS ON  THE NAVY LISTING OF OCCUP CHEM
    REPROD HAZARDS. SEEK CONSULTATION FROM APPROPRIATE HEALTH
    PROFESSIONALS (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: CONCERNING LATEST HAZARD LIST INFO &
    SAFE HNDLG & EXPOS INFO . CHRONIC: WEAKNESS, INSOMNIA,
    HYPERTENSION, SLIGHT IRRIT OF EYES, HDCH, POSS PARALYSIS. CHRONIC
    OVEREXP TO LEAD MAY RSLT I N DMG TO BLOOD-FORMING, NERV, URINARY
    &REPROD SYS. CALIFORNIA PROPOSITION 65 WARNING! PROD CONTAINS CHEM
    KNOWN (SUPDAT)
Medical Cond Aggravated by Exposure:NOTE TO PHYSICIANS: LEAD AND ITS
    INORGANIC COMPOUNDS ARE NEUROTOXINS WHICH MAY PRODUCE NEUROPATHY.

=======================  First Aid Measures  =======================

Eyes: FLUSH WITH COPIOUS QUANTITIES OF WATER FOR AT LEAST 15
    MINUTES. GET MEDICAL ATTENTION. SKIN: WASH WITH SOAP AND WATER.
    INHALATION: REMOVE FROM EXPOSURE. GET MEDICAL ATTENTION IF
    EXPERIENCING EFF ECTS OF OVEREXPOSURE. INGESTION: GET IMMEDIATE
    MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:DO NOT USE WATER ON FIRES WHERE MOLTEN
    METAL IS PRESENT. HIGH TEMPERATURES MAY PRODUCE HEAVY METAL FUMES,
    DUST AND OR VAPOR.

==================  Accidental Release Measures  ==================

Spill Release Procedures:PARTICULATE MATTER SHOULD BE STORED IN DRY
    CONTAINERS FOR LATER DISPOSAL. DUST MATERIAL SHOULD BE VACUUMED OR
    WET SWEPT. DO NOT USE COMPRESSED AIR OR DRY SWEEPING AS A MEANS OF
    CLEANING.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:WASH HANDS WITH SOAP AND WATER AFTER
    HANDLING SOLDER. STORE IN DRY AREA. AVOID SKIN CONTACT. AVOID
    BREATHING SMOKE DURING SOLDERING.
Other Precautions:NONE KNOWN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:AS SPECIFIED BY 29 CFR 1910.1025(F) IF EXPOSURE
    EXCEEDS PEL. NIOSH APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF
    CONCERN .
Ventilation:LOCAL EXHAUST: REMOVE SMOKE FROM BREATHING AREA. MECHANICAL
    (GENERAL): ADEQUATE.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER .
    PERSONAL CLOTHING & SHOES SHOULD BE PROTECTED FROM CONTAMINATION.
Work Hygienic Practices:DO NOT EAT, DRINK OR SMOKE IN WORK AREA. WASH
    HANDS THOROUGHLY BEFORE EATING OR SMOKING.
Supplemental Safety and Health
EFTS OF OVEREXP: TO STATE OF CALIFORNIA TO CAUSE CANCER, & THAT MAY
    CAUSE BIRTH DEFECTS/OTHER REPRO HARM.

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:M.P/F.P Text:361F,183C
Spec Gravity:4 (WATER =1)
Solubility in Water:FLUX SOLUBLE
Appearance and Odor:GRAY METALLIC PASTE WITH A SWEET ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:OR BY PRODUCTS: HIGH TEMPERATURES MAY
    PRODUCE HEAVY METAL FUMES, DUST AND OR VAPORS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
    FEDERAL REGULATIONS. CONSULT A LICENSED HAZARDOUS WASTE COMPANY.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***