=====================  Product Identification  =====================

MSDS NAME:AMERCOAT 3273 BLACK RO 1.8 RESIN, 3273B90042
NIIN:00N093359
Status Code:A
Kit Part:Y
MSDS Number: CJYDX
=== Responsible Party ===
Company:AMERON  INTERNATIONAL PROTECTIVE COATINGS GROUP
Address:201 NORTH BERRY ST
City:BREA
State:CA
ZIP:92821
Country:US
Info Phone Num:714-529-1951
Emergency Phone Num:800-424-9300
Preparer's Name:H KLINE
Chemtrec Ind/Phone:(800)424-9300
CAGE:55849
=== Contractor Identification ===
Company:AMERON INTERNATIONAL PROTECTIVE COATINGS GROUP
Address:201 NORTH BERRY ST.
Box:City:BREA
State:CA
ZIP:92821
Country:US
Phone:714-529-1951
CAGE:55849

=============  Composition/Information on Ingredients  =============

Name:1-CHLORO-2,3-EPOXYPROPANE-4,4'-ISOPROPYLIDENEDIPHENOL
    POLYMER; (EPOXY RESIN)
CAS:25068-38-6
RTECS #:CE6880000
< Wt:50.

Name:AMORPHOUS SYNTHETIC SILICA GEL; (SILICA (AMORPHOUS)
CAS:112926-00-8
RTECS #:VV7315000
< Wt:20.
OSHA PEL:see Table Z-3
ACGIH TLV:10 MG/M3

Name:METHYL ISOBUTYL KETONE. VP: 16 @ 68F. LD50: (ORAL,RAT) 10
    G/KG. LC50: 4000 PPM
CAS:108-10-1
RTECS #:SA9275000
< Wt:10.1
OSHA PEL:410 MG/M3;100 PPM
ACGIH TLV:205 MG/M3;50 PPM
ACGIH STEL:307 MG/M3;75 PPM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:IRON OXIDE BLACK (CONTAINING INGS 5,6,7,8,9 AND 10)
CAS:12227-89-3
< Wt:10.
OSHA PEL:5 MG/M3
ACGIH TLV:5 MG/M3

Name:IRON OXIDE BLACK
CAS:1317-61-9

Name:LEAD
CAS:7439-92-1
RTECS #:OF7525000
Fraction by Wt: <10% PPM
ACGIH TLV:0.15 MG/M3
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Name:CADMIUM
CAS:7440-43-9
RTECS #:EU9800000
Fraction by Wt: 2-6% PPM
OSHA PEL:SEE 1910.1027
EPA Rpt Qty:10 LBS
DOT Rpt Qty:10 LBS

Name:ARSENIC
CAS:7440-38-2
RTECS #:CG0525000
Fraction by Wt: 3% PPM
ACGIH TLV:0.01 MG/M3
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Name:BERYLLIUM
CAS:7440-41-7
RTECS #:DS1750000
Fraction by Wt: <2% PPM
OSHA PEL:SEE TABLE Z-2
ACGIH TLV:0.002 MG/M3

Name:CHROMIUM (CR6+)
CAS:18540-29-9
RTECS #:GB6262000
Fraction by Wt: <0.1% PPM
OSHA PEL:1 MG/M3
ACGIH TLV:0.05 MG/M3

Name:1-METHOXY-2-HYDROXYPROPANE; (PROPYLENE GLYCOL METHYL
    ETHER). VP: 8 @ 68F. LD50: (ORAL,RAT) 12 G/KG. LC50: 3000 PPM.
CAS:107-98-2
RTECS #:UB7700000
< Wt:6.8
OSHA PEL:360MG/M3;100 PPM
ACGIH TLV:369 MG/M3;100 PPM
ACGIH STEL:553 MG/M3;150 PPM

Name:BUTYL ACETATE. VP: 10 @ 68F. LD50: (ORAL,RAT) 10 G/KG.
    LC50: 1800 PPM.
CAS:123-86-4
RTECS #:AF7350000
< Wt:5.3
OSHA PEL:710 MG/M3;150 PPM
ACGIH TLV:713 MG/M3;150 PPM
ACGIH STEL:950 MG/M3;200 PPM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:AROMATIC HYDROCARBON RESIN (CONTAINING INGS 14 & 15)
CAS:25155-81-1
< Wt:5.

Name:TOLUENE
CAS:108-88-3
RTECS #:XS5250000
= Wt:.6
OSHA PEL:see Table Z-2
ACGIH TLV:188 MG/M3;50 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:FORMALDEHYDE
CAS:50-00-0
RTECS #:LP8925000
Fraction by Wt: 0.001%
OSHA PEL:SEE 1910.1048
ACGIH STEL:C0.37 MG/M3;C0.3 PPM
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Name:HEXANOL, ACETATE, BRANCHED AND LINEAR (OXOHEXYL ACETATE).
    VP: 1.4 @ 68F
CAS:88230-35-7
< Wt:2.5
ACGIH TLV:50PPM

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:SEE INGREDIENTS
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EXPOSURE EFFECTS: VAP/SPRAY MIST OR
    SPATTERED MATL CAN BE HARMFUL. IRRITATING TO EYES, SKIN, AND IF
    INHALED; TO NOSE & THROAT. EXCESS OR PROLONGED INHAL CAN CAUSE
    HEADACHE, NAUS OR DIZZINESS. REPEATED  & PROLONGED OCCUP OVEREXP TO
    SOLVENTS IS ASSOC WITH PERMANENT BRAIN & NERV SYS DMG. INTENTIONAL
    ABUSE, MISUSE OR OTHER MASSIVE EXPOSURE TO SOLVS MAY CAUSE MULTIPLE
    ORGAN DMG AND/OR DEATH. OVER-EXPOSU RE (PRLNGD/RPTD USE): CAN
    AGGRAVATE OR ACCENTUATE ANY OF THESE EFFECTS. SKIN: IRRITANT.
    BURNS. SENSITIZATION/ALLERGIC RXN, SUCH AS RASH/HIVES. CAN BE
    ABSORBED THROUGH SKIN. INHAL: IRRITANT. (EFTS OF O VEREXP)
Effects of Overexposure:HLTH HAZS: LUNG INJURY. RESP SENSITIZATION &
    ALLERGIC RXN SUCH AS ASTHMA. CNS DMG. WELDING FUMES CAN CAUSE
    WELDING FUME FEVER. REPEATED EXPOSURE TO IRON DUST CAN CAUSE
    SIDEROSIS. EYES: IRRITANT. BURNS . INGESTION: HARMFUL IF SWALLOWED.
    ASPIR INTO LUNGS CAN DMG LUNG & CAUSE CHEM PNEUMONIA. TARGET
    ORGANS: LUNGS. SKIN. EYES. STOMACH. CENTRAL NERVOUS SYSTEM. LEAD &
    TOLUENE APPEARS ON THE NAVY LISTING O F OCCUP CHEMIC REPRODUCTIVE
    HAZARDS. SEEK CONSULTATON FROM APPROP HEALTH PROFESSIONALS
    CONCERNING LATEST HAZARD LIST INFO & SAFE HANDLING & EXPOSURE
    INFORMATION .
Medical Cond Aggravated by Exposure:SKIN. RESPIRATORY.

=======================  First Aid Measures  =======================

First Aid:INHAL: REMOVE TO FRESH AIR. RESTORE NORMAL BREATHING. TREAT
    SYMPTOMATICALLY. SEE PHYS. SKIN: WASH THOROUGHLY W/SOAP & WATER.
    REMOVE CONTAMD CLOTHING. CONSULT PHYS IF IRRITATION PERSISTS. EYES:
    FLUSH I MMED W/PLENTY OF WATER FOR AT LEAST 15 MINUTES & GET
    MEDICAL ATTENTION. INGEST: DRINK 1-2 GLASSES OF WATER TO DILUTE.
    NEVER GIVE ANYTHING BY MOUTH TO UNCON PERSON. DO NOT INDUCE
    VOMIT(UNLESS METHANOL;  LISTED IN INGRED SECTION). CONSULT
    PHYS/POISON CONTROL CENTER IMMEDIATELY. TREAT SYMPTOMATICALLY.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:=29.4C, 85.F
Lower Limits:1.0%
Upper Limits:13.8
Extinguishing Media:FLAMMABILITY - OSHA: FLAMMABLE - CLASS IC. DOT:
    FLAMMABLE. EXTINGUISHING MEDIA: FOAM, CO*2, DRY CHEMICAL. LOWEST
    FLASHING SOLVENT: METHYL ISOBUTYL KETONE (108-10-1).
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT . WATER MAY BE USED TO COOL CLOSED CONTAINERS TO PREVENT
    PRESSURE BUILD-UP OR EXPLOSION WHEN EXPOSED TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
    EXPOSED TO EXTREME HEAT AND PRESSURE BUILDUP. MAY PRODUCE A
    FLOATING FIRE HAZARD. ISOLATE FROM ELECTRICAL EQUIPMENT, SPARKS,
    HEAT AND OPEN FLAME. VAPORS MAY SPREAD L ONG DISTANCES, CAUSE FLASH
    FIRE OR IGNITE EXPLOSIVELY.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
    BREATHING VAPORS. VENTILATE AREA. USE ABSORBENT, INERT CLEANUP
    MATERIALS. (DO NOT USE SAWDUST). REMOVE ABSORBENT MATERIAL WITH
    NON-SPARKING TOOLS. PLACE IN SEPARA TE CONTAINER. KEEP OUT OF
    SEWERS AND WATERWAYS. IF ENTRY IS THREATENED OR OCCURS, NOTIFY
    LOCAL AUTHORITIES.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINER CLOSED, UPRIGHT WHEN
    NOT IN USE. STORE IN COOL, DRY, WELL-VENTILATED AREA. AVOID
    PROLONGED STORAGE TEMPERATURES ABOVE 100F. USE CAUTION WHEN
    POURING. AVOID BREATHING SANDING DUST. DO NO T WELD OR FLAME CUT ON
    EMPTY CONTAINER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR NIOSH CERTIFIED RESP DESIGNED TO REMOVE
    COMBINATION OF PARTICULATES (DUST/SPRAY MIST) & VAP. WHEN BRUSHING,
    ROLLING/SPREADING; SELECT APPROP NIOSH APPRVD RESP PROT FOR CNDTNS.
    FOR SPECIFIC CNDTNS , REFER TO CURRENT "NIOSH POCKET GUIDE TO CHEM
    HAZARDS". IN CONFINED/RESTRICTED VENT AREAS USE NIOSH APPRVD
    AIR-LINE RESPS/HOODS. REFER TO 29 CFR, OSHA (SUPDAT)
Ventilation:IMPLEMENT ADMINISTRATIVE & ENGINEERING CONTROLS TO REDUCE
    EXPOSURE. PROVIDE SUFFICIENT VENT IN VOL & PATTERN TO KEEP AIR
    CONTAMINANT CONCS (SUPDAT)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER .
    DEPENDENT UPON APPLIC METH, WEAR RESIST COVERALLS, GLOVES & SHOE
    COVERINGS TO PVNT SKIN CONT. WEAR SOLV RESIST GLASSES W/SPLASH
    GUARDS/FACE (OTHER INFO)
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING & BEFORE EATING,
    SMOKING/USING TOILET. LAUNDER CONTAMD CLTHG BEFORE USE. DESTROY
    CONTAMD LEATHER & ABSORBENT SHOES WHICH CANNOT BE DECONTAMINATED.
Supplemental Safety and Health
PHYSICAL: MIXED VOC, G/L: 330. PHOTOCHEMICALLY REACTIVE: YES. RESP
    PROT: PARTS 1910.134 & 1915 FOR COATING OPERATIONS; PART 1910.146
    CONFINED SPACES; ANSI Z88.2, PRACTICES FOR RESP PROT; 42 CFR, PART 
    84 PARTICULATE RESPS. VENT: BELOW TLV LIMITS. REMOVE WELDING/FLAME
    CUTTING DECOMP PRODS; FOLLOW CURRENT,  (OTHER INFO)

==================  Physical/Chemical Properties  ==================

Boiling Pt:>116.7C, 242.F
B.P. Text:242-327F
Vapor Pres:SEE INGREDS
Vapor Density:HVR/AIR
Evaporation Rate & Reference:FASTER THAN BUTYL ACETATE
Solubility in Water:NO
Appearance and Odor:LIQUID. SOLVENT ODOR.
Percent Volatiles by Volume:35.11

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS AND ALKALIES.
Stability Condition to Avoid:HEAT, OPEN FLAME, ARC OR SPARKS.
Hazardous Decomposition Products:(BY FIRE, BURNING OR WELDING); CO,
    CO*2. IRON OXIDE FUMES. TOXIC GASES OR FUMES.

===================  Toxicological Information	===================

Toxicological Information:SEE INGREDIENTS. (S)=SKIN;
    LD50=DERMAL.RABBIT; LC50=INHALATION,RAT; DNA=DATA NOT AVAILABLE;
    NA=NOT APPLICALBLE.

=====================  Ecological Information  =====================

Ecological:NO INFORMATION.

====================  Disposal Considerations  ====================

Waste Disposal Methods:EPA WASTE NO.: D001, D018. PLACE IN SEPARATE,
    APPROP, CLOSED CONTAINER IN ACCORDANCE WITH ALL APPLICABLE LOCAL,
    STATE, AND FEDERAL REGULATIONS. THIS MATERIAL HAS NOT BEEN TESTED
    BY TOXICITY CHARACTERI STIC LEACHING PROCEDURE (TCLP).

===================  MSDS Transport Information  ===================

Transport Information:DOT PROPER SHIPPING NAME: PAINT. DOT HAZARD
    CLASS: 3. DOT UN/NA NUMBER: 1263. HAZARD SUBCLASS: NA. IMO: NA.
    PACKING GROUP: III.

=====================  Regulatory Information  =====================

SARA Title III Information:METHYL ISOBUTYL KETONE IS SUBJECT TO
    REPORTING REQUIREMENTS OF SARA (40 CFR 355 AND 372). METHYL ETHYL
    KETONE AND BUTYL ACETATE ARE SUBJECT TO REPORTING REQUIREMENTS OF
    CERCLA (40 CFR 302).
Federal Regulatory Information:+PIGMENT CONTENT IS DEPENDENT ON COLOR.
    ALL INGREDS ARE ON TSCA INVENTORY OR ARE EXEMPT. U.S. FED REGS: AS
    FOLLOWS - OSHA: HAZARDOUS BY DEFINITION OF HAZARD COMMUNICATION
    STANDARD (29 CFR 1910.1200).  INTERNATIONAL REGS: AS FOLLOWS -
    CANADIAN WHMIS: THIS MSDS HAS BEEN PREPARED IN COMPLIANCE WITH
    CONTROLLED PRODUCT REGULATIONS EXCEPT FOR USE OF THE 16 HEADING.
    CANADIAN WHMIS CLASS: NO INFORMATION AV AILABLE.
State Regulatory Information:**CALIF. TITLE 26:22-1200 (PROP 65)
    WARNING: THIS PRODUCT CONTAINS CHEM KNOWN TO STATE OF CALIFORNIA TO
    CAUSE CANCER. #CALIF. TITLE 26:22-1200 (PROP 65). WARNING: THIS
    PROD CNTNS CHEM KNOWN TO STATE O F CALIFORNIA TO CAUSE BIRTH
    DEFECTS/OTHER REPRODUCTIVE HARM. NEW JERSEY RIGHT-TO-KNOW: NO
    NON-HAZARDOUS MATLS ARE AMONG TOP 5 INGREDIENTS. PENNSYLVANIA
    RIGHT-TO-KNOW: NO NON-HAZARDOUS INGREDIENTS ARE  PRESENT AT GREATER
    THAN 3%.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***