=====================  Product Identification  =====================

MSDS NAME:HANSA YELLOW TINTING PASTE - COLORANT
NIIN:00-664-3354
MSDS Number: BFKMS
=== Responsible Party ===
Company:PPG INDUSTRIES, INC, COATINGS & RESINS DIVISION
Emergency Phone Num:412-434-3131
CAGE:DO894
=== Contractor Identification ===
Company:PPG INDUSTRIES INC
Address:ONE PPG PLACE
Box:City:PITTSBURGH
State:PA
ZIP:15272
Country:US
Phone:1-800-245-2974 (CAL HYPO)
CAGE:47695
Company:PPG INDUSTRIES, INC.
Address:4325 ROSANNA DR
Box:9
City:ALLISON PARK
State:PA
ZIP:15101
Country:US
Phone:412-592-5555
CAGE:DO894

=============  Composition/Information on Ingredients  =============

Name:DIETHYLENE GLYCOL
CAS:111-46-6
RTECS #:ID5950000
Fraction by Wt: 20.0%

=====================  Hazards Identification  =====================

Effects of Overexposure:SKIN: POSSIBLE PRIMARY IRRIT. EYES: PRIMARY
    IRRIT.

=======================  First Aid Measures  =======================

First Aid:FUMES: REMOVE TO FRESH AIR. CONSULT MD. EYES: FLUSH W/COPIOUS
    AMT OF WATER 15 MIN, CONSULT MD. SKIN: WASH AFFECTED AREA W/WATER.
    REMOVE CONTAMINATED CLOTHING. CONSULT MD.

=====================  Fire Fighting Measures  =====================

Flash Point:255F COC
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, ALCOHOL FOAM
Fire Fighting Procedures:USE WATER FOG TO COOL CONTAINERS EXPOSED TO
    EXTREME HEAT.
Unusual Fire/Explosion Hazard:ISOLATE FROM ALL IGNITION SOURCES. DO NOT
    APPLY TO HOT SURFACES. KEEP CONTAINERS TIGHTLY CLOSED.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
    BREATHING VAPORS. REMOVE W/INERT ABSORBENT & NON-SPARKING TOOLS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
    QUANTITIES IN BLDG DESIGNED FOR STORAGE OF NFPA CLASS III B
    COMBUSTIBLE LIQUIDS.
Other Precautions:DO NOT TAKE INTERNALLY. GROUND CONTAINER WHEN
    POURING. AVOID SPLASHING. DO NOT FLAME CUT, BRAZE OR WELD W/O
    APPROVED RESPIRATOR OR ADEQUATE VENTILATION.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE APPROVED RESPIRATOR OR AIR-LINE HOOD
Ventilation:SUFFICIENT TO KEEP TLV & LEL BELOW STATED LIMITS
Protective Gloves:RECOMMENDED
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:AS NEEDED TO PREVENT SKIN CONTACT TO
    CONTAMINATED CLOTHING
Supplemental Safety and Health
CONTAINS LEAD AS % NON-VOLATIVE <0.06%. VAPOR DENSITY LIGHTER THAN AIR.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:100 TO 246F
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:68.2

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:MAY PRODUCE FUMES CONTAINING CARBON
    MONOXIDE WHEN HEATED

====================  Disposal Considerations  ====================

Waste Disposal Methods:DO NOT INCINERATE CLOSED CONTAINERS. DISPOSE OF
    IN ACCORDANCE W/ALL LOCAL, STATE, FED REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***