=====================  Product Identification  =====================

MSDS NAME:ENAMEL ALKYD GLOSS WHITE 17875
NIIN:00-664-4761
MSDS Number: BFKPN
=== Responsible Party ===
Company:PRATT & LAMBERT, INC.
Address:16116 E 13TH ST
Box:2153
City:WICHITA
State:KS
ZIP:67201
Country:US
Preparer's Name:W.A. ELLISON
CAGE:FO127
=== Contractor Identification ===
Company:PRATT & LAMBERT, INC/BUFFALO, NY 14240
Box:22
CAGE:FO127
Company:PRATT AND LAMBERT INC
Address:Box:6027
City:CLEVELAND
State:OH
ZIP:44101-1027
Country:US
Phone:216-566-2902
CAGE:61196

=============  Composition/Information on Ingredients  =============

Name:VM&P NAPHTHA (LIGROINE)
CAS:8032-32-4
RTECS #:OI6180000
OSHA PEL:300 PPM/400 STEL
ACGIH TLV:300 PPM; 9192

Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SWALLOWING: CAN CAUSE GASTROINTESTINAL
    IRR/NAUSEA/VOMIT. ASPIRATION OF MAT'L MAYCAUSE CHEM PNEUMONITIS.
    INHALATION: NOSE/THROAT IRRITA. HIGH CONCENTRATION MAY  CAUSE
    CENTRAL NERVOUS SYSTEM DEPRESSION  CHAR BY
    HEADACHES/DIZZINESS/NAUSEA/CONFUSION. EYE: MAY CAUSE EYE IRR. SKIN:
    MAY CAUSE DEFATTING AND IRRITATION.
Effects of Overexposure:REPORTS HAVE ASSOCIATED PROLONGED AND REPEATED
    OCCUPATIONAL OVEREXPOSURE TO     SOLVENTS WITH PERMANENT BRAIN AND
    NERVOUS SYSTEM DAMAGE. INTENTIONAL MISUSE BY  DELIBERATELY
    CONCENTRATING AND INHALING	THE CONTENTS MAY BE HARMFUL OR FATAL.

=======================  First Aid Measures  =======================

First Aid:SWALLOWING: DO NOT INDUCE VOMITING/GET MED ATTN. INHALATION:
    REMOVE TO FRESH AIRIF BREATHING HAS STOPPED GIVE CPR. GET MED ATTN.
    EYE: FLUSH W/WATER FOR 15 MIN  LIFTING UPPER/LOWER LIDS. GET MED
    ATTN.  SKIN: REMOVE CONTAMINATED CLOTHING.WASH AFFECTED AREA.
    OBTAIN MED ATTN IF IRR'N PERSISTS. TREATMENT REQ FOR OVER- 
    EXPOSURE S/B DIRECTED AT THE CONTROL OF SYMPTOMS AND THE CLINICAL
    CONDITIONS.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:>102F 38.89C
Extinguishing Media:USE NFPA CLASS B FIRE EXTINGUISHERS. POLYMER FOAM
    IS PRE-   FERRED FOR LARGE FIRES.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS. WATER
    TO COOL CONT TO PREVENT POSSIBLE AUTO-IGNITION OR EXPLOSION. IF
    WATER IS USED, FOG NOZZLES ARE PREFERABLE.
Unusual Fire/Explosion Hazard:ISOLATE FROM HEAT/ELEC
    EQUIP/SPARKS/FLAME. CONT MAY EXPLODE WHEN EXPOSED TO     HEAT.
    OVEREXPOSURE TO DECOMP PRODUCTS MAY CAUSE HEALTH HAZ. OBTAIN MED
    ATTN.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIM ALL IGNITION SOURCES. DIKE/CONTAIN SPILL
    WITHINERT MAT'L. TRANSFER LIQ'S/ABSORBENT DIKING MAT'LIN COVERED
    METAL CONT'S FOR RECOVERY/DISPOSAL. USEONLY NON-SPARKING TOOLS.
    PREVENT CONTAM OF SEWERS/ STREAMS/GROUNDWATER W/SPILLED MAT'L/USED
    ABSORBENT

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 95F. STORE LARGE
    QUANTITIES IN COMPLIANCE WITH OSHA 29CFR1910.106.
Other Precautions:DO NOT REUSE EMPTY CONTAINERS. DO NOT TAKE
    INTERNALLY. CONTAINER SHOULD BE	 GROUNDED AND BONDED TO THE
    RECEIVING CONTAINER. DO NOT WELD/BRAZE OR CUT CONT'R.NEVER USE
    PRESSURE TO EMPTY. DRUM IS NOT  A PRESSURE VESSEL. CLOSE AFTER EA
    USE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WELL VENTILATED AREA-RESP NOT REQ. RESTRICTED
    VENT-NIOSH CHEMICAL CARTRIDGE MAY BE REQ. IF SPRAYING, MECH
    PREFILTER MAY BE REQ. IF TLV ARE EXCEEDED, USE A PROP FITTED
    NIOSH/MSHA RESP W/APPROP PROTECTI ON FACTOR. SEE OSHA 29 CFR
    1910.134.
Ventilation:PROVIDE DILUT/LOCAL EXH VENT TO KEEP CONCENT OF HAZ INGRID 
    BELOW EXPOSURE LMT STD. REMOVE PROD GEN-WELD/CUT/BRAZ OBJECT
Protective Gloves:SOLVENT IMPERMEABLE GLOVES.
Eye Protection:WEAR SAFETY SPECTACLES.
Other Protective Equipment:NOT LIKELY TO BE NEEDED.
Work Hygienic Practices:WASH WITH SOAP AND WATER HANDS/FACE THROUGHLY
    BEFORE EATING OR DRINKING.
Supplemental Safety and Health
NK

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:280F 388F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER.
Percent Volatiles by Volume:57

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALINE MATERIALS.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT AND SOURCES OF
    IGNITION.
Hazardous Decomposition Products:BURNING, INCLUDING WHEN HEATED BY
    WELDING/CUTTING WILL PRO- DUCE SMOKE/CARBON MONOXIDE/CARBON
    DIOXIDE.
Conditions to Avoid Polymerization:KEEP AWAY FROM HEAT, SPARKS AND
    FLAME.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE ONLY IN EPA PERMITTED FACILITY.
    DISPOSEONLY IAW FED/STATE/LOCAL REGS. DO NOT INCINERATE  CLOSED
    CONTAINERS. OBSERVE PRECAUTIONS FOR DIS-   POSAL OF FLAMMABLE
    MAT'S. CONTAMINATED ABSORBENT   MAY BE DISPOSED IN A HAZARDOUS
    WASTE LANDFILL.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***