=====================  Product Identification  =====================

MSDS NAME:MIL-P-698A
NIIN:00-664-4743
MSDS Number: BFKPH
=== Responsible Party ===
Company:TRIAD PAINT AND CHEMICAL CORP
Address:810 EVERGREEN AVE
City:BROOKLYN
State:NY
ZIP:11207-1140
Country:US
CAGE:33151
=== Contractor Identification ===
Company:TRIAD PAINT AND CHEMICAL CORP
Address:810 EVERGREEN AVE
Box:City:BROOKLYN
State:NY
ZIP:11207-1140
Country:US
CAGE:33151

=============  Composition/Information on Ingredients  =============

Name:PIGMENTS
Fraction by Wt: 20.5%

Name:CATALYST

Name:VEHICLE

Name:SOLVENTS
Fraction by Wt: 37.5%
ACGIH TLV:200 PPM

Name:ADDITIVES

=====================  Hazards Identification  =====================

Effects of Overexposure:SKIN,EYE
    IRRITANT,ANESTHESIA,HEADACHE,DIZZINESS,NAUSE,ETC.

=======================  First Aid Measures  =======================

First Aid:SKIN CONTACT-WASH WITH MILD SOAP AND WATER.EYE CONTACT FLUSH
    EYES WITH PLENTY OF WATER.INHALATION-REMOVE TO FRESH AIR,RESTORE
    BREATHING IF REQUIRED.

=====================  Fire Fighting Measures  =====================

Flash Point:111F,44C TCC
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:FOAM,CO*2,STEAM,WATER FOG,DRY CHEMICAL
Fire Fighting Procedures:EXCLUDE AIR,DO NOT USE WATER,CONSULT FIRE
    MARSHAL
Unusual Fire/Explosion Hazard:VAPOR FORMS EXPLOSIVE MIXTURE W/AIR
    BETWEEN UPPER AND LOWER EXPLOSIVE LIMITS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL IGNITION SOURCES.VENTILATE AREA

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID IGNITION SOURCES,SPLASH
    FILLING,EXCESSIVE HEAT.PROVIDE ADEQUATE VENTILATION.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:ORGANIC CANNISTER MASK OR AIR PACK
Ventilation:MECHANICAL W/APPROVED CLASS D EXPLOSION PROOF MOTORS/SWITCH
Protective Gloves:NOT REQUIRED
Eye Protection:GOGGLES,SAFETY GLASSES
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:323F,162C
Vapor Pres:1
Vapor Density:5.0
Spec Gravity:0.777
Evaporation Rate & Reference:< BUTYL ACETATE
Solubility in Water:NEGLIGIBLE
Percent Volatiles by Volume:56

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO CO*2 WHEN COMBUSTED

====================  Disposal Considerations  ====================

Waste Disposal Methods:EVAPORATE OR FLUSH WITH WATER IN A WELL
    VENTILATED	 AREA.USE OIL SEWER IF AVAILABLE OR REMOVE TO A
    CONTAINER

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***