=====================  Product Identification  =====================

MSDS NAME:GRAY 36231,LUSTERLESS ALKYD ENAMEL 741-612
NIIN:00-664-3365
MSDS Number: BFKMV
=== Responsible Party ===
Company:ENMAR AN AMERON CO
Address:201 N BERRY ST
City:BREA
State:CA
ZIP:92621-3904
Country:US
CAGE:JO877
=== Contractor Identification ===
Company:AMERON INDUSTRIAL COATINGS DIVISION
Address:201 N BERRY ST
Box:City:BREA
State:CA
ZIP:92621-3904
Country:US
Phone:714-529-4597
CAGE:09869
Company:ENMAR AN AMERON COMPANY
CAGE:JO877

=============  Composition/Information on Ingredients  =============

Name:NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS:8030-30-6
RTECS #:SE7555000
Fraction by Wt: 36.2%
OSHA PEL:100 PPM

=====================  Hazards Identification  =====================

Effects of Overexposure:INH:ANESTHETIC, IRRIT OF RESP TRACT OR ACUTE
    CNS DEPRSSN W/HDACHE,DIZ,UNCON,COMA. SKIN & EYE:IRRIT.

=======================  First Aid Measures  =======================

First Aid:IN CASE OF CONTACT, FLUSH SKIN & EYES W/JPLENTY OF WATER
    WHILE REMOVING CONTAMINATED CLOTHING. IF INHALED, REMOVE TO FRESH
    AIR. CALL A PHYSICIAN IF SYMPTOMS PERSIST.J

=====================  Fire Fighting Measures  =====================

Flash Point:86F TCC
Lower Limits:1.1
Extinguishing Media:SM FIRES:CO*2,DRY CHEM. LG FIRES:POLYMER FOAM
    PREFERRED
Fire Fighting Procedures:USE SELF-CONTAINED BREATING APPARATUS
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPOSED TO HEAT MAY
    EXPLODE DUE TO PRESSURE BUILD-UP.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAME, HOT
    SURFACES, & ELECTRICAL,STATIC, OR FRICTIONAL SPARKS).AVOID
    BREATHING VAPORS.VENTILATE AREA.REMOVE W/INERT ABSORBENT &
    NON-SPARKING TOOLS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 120F.STORE LG QTY
    IN BLDG DESIGNED TO STORE NFPA CLASS ONE FLAM LIQ. DO NOT TAKE
    INTERNALLY.ADD LABEL WARNING.
Other Precautions:GROUND CONTANERS WHEN POURING. AVOID FREE FALL OF LIQ
    IN EXCESS OF FEW IN. DO NOT FLAME CUT, BRAZE OR WELD COATED
    MATERIAL W/O APPROVED RESPIRATOR OR APPROPRIATE VENTILATION.
    DOT:FLAM LIQUID.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:RESTRICT VENT:CHEM-MECH FLTR.CLSD:AIR-LINE TYPE
Ventilation:GEN DILTN/LOCAL EXHST TO KEEP TLV/LEL BELOW LIMIT, REMV
    FUME
Protective Gloves:YES
Eye Protection:YES, FOR SPLASH
Other Protective Equipment:AVOID LONG EXPOSURE TO CONTAM CLOTHING.
Supplemental Safety and Health
VAPOR PRESSURE: 3.2; VAPOR DENSITY: HEAVIER THAN AIR; WT PER GALLON
    10.2 LBS.

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:311-373F
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:57.3

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AVOID FIRES, HEAT & HOT SURFACES

====================  Disposal Considerations  ====================

Waste Disposal Methods:DO NOT INCINERATE CLOSED CONTAINER. DISPOSE IN
    ACCORDANCE W/FED, STATE & LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***