=====================  Product Identification  =====================

MSDS NAME:TT-P-30D 37875
NIIN:00-664-5274
MSDS Number: BFKPY
=== Responsible Party ===
Company:ATLAS PAINT AND VARNISH CO
Emergency Phone Num:201 373-3300
CAGE:84239
=== Contractor Identification ===
Company:ATLAS PAINT AND VARNISH CO
CAGE:84239

=============  Composition/Information on Ingredients  =============

Name:TITANIUM DIOXIDE

Name:MAGNESIUM SILICATE

Name:ALKYD RESIN
Fraction by Wt: 12%

Name:NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS:8030-30-6
RTECS #:SE7555000
Fraction by Wt: 32%
OSHA PEL:100 PPM

Name:CALCIUM COBALT DRIERS
Fraction by Wt: 1%
ACGIH TLV:500 PPM

=====================  Hazards Identification  =====================

Effects of Overexposure:SKIN,EYE
    IRRITANT,HEADACHE,NAUSEA,DIZZINESS,ANESTHESIA

=======================  First Aid Measures  =======================

First Aid:SKIN: WASH W/MILD SOAP AND WATER.EYE: FLUXH WITH PLENTY OF
    WATER.INHAL:REMOVE TO FRESH AIR.APPLY ARTIF.RESP.IF NECESSARY.CALL
    DOCTOR

=====================  Fire Fighting Measures  =====================

Flash Point:123F,50.6C TCC
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:CO*2,FOAM,DRY CHEMICALS,WATER FOG
Fire Fighting Procedures:DO NOT USE WATER-CONSULT FIRE MARSHALL
Unusual Fire/Explosion Hazard:VAPORS FORM EXPLOSIVE MIX WITH AIR
    BETWEEN UPPER AND LOWER EXPLOSION LIMITS

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE IGNITION SOURCES AND VENTILATE
    AREA.WIPE IMMEDIATELY AND DISGARD ABSORBENTS SAFELY.DIKE LARGE
    SPILLS AND PUMP TO WASTE TANK.AVOID BREATHING VAPORS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID OPEN SOURCES OF
    IGNITION-EXCESSIVE HEAT-VENTILATE AREA.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:RECOMMEND FACE MASK 21C-132 BUREAU OF MINES
Ventilation:LOCAL EXHAUST
Protective Gloves:YES
Eye Protection:YES
Other Protective Equipment:CONVENTIONAL CLOTHES FOR PAINTING
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:346F,174.4C
Vapor Pres:1
Vapor Density:5.3
Spec Gravity:1.18
Evaporation Rate & Reference:< BUTYL ACETATE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:THIN WHITE PAINT,VIRTUALLY ODORLESS
Percent Volatiles by Volume:45

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:OPEN FLAME
Hazardous Decomposition Products:CO.CO*2 WHEN COMBUSTED

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***