=====================  Product Identification  =====================

MSDS NAME:TT-E-489G WHITE ENAMEL 17875
NIIN:00-664-4761
MSDS Number: BFKPK
=== Responsible Party ===
Company:CHEMRAY COATING CORP.
Address:209 N. MICHIGAN AVE
City:KENILWORTH
State:NJ
ZIP:07033
Country:US
Info Phone Num:201-245-1111
Emergency Phone Num:CHEMTREC 800-924-9300
CAGE:33832
=== Contractor Identification ===
Company:CHEMRAY COATING CORP
Address:209 N MICHIGAN AVE
Box:City:KENILWORTH
State:NJ
ZIP:07033
Country:US
Phone:201-245-1111
CAGE:33832

=============  Composition/Information on Ingredients  =============

Name:MINERAL SPIRITS   RULE 66
CAS:64475-85-0
RTECS #:PY8240000
Fraction by Wt: 42%
Other REC Limits:200 PPM
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:LEAD  (SARA III)
CAS:7439-92-1
RTECS #:OF7525000
Fraction by Wt: 0.25%
Other REC Limits:N/K 
OSHA PEL:0.05 MG/M3;1910.1025
ACGIH TLV:0.15 MG/M3;DUST 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:N/K 
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:YES	 OSHA:NO
Health Hazards Acute and Chronic:HIGH VAPOR CONCENTRATIONS (OVER) 1000
    PPM) ARE IRRITATING TO THE EYE & RESPIRATORY TRACT. MAY CAUSE
    HEADACHES & DIZZINESS- PROLONG SKIN CONTACT IRRITATES.
Explanation of Carcinogenicity:LEAD:IARC-HUMAN INADEQUATE, ANIMAL
    SUFFICIENT .
Effects of Overexposure:REPORTS HAVE ASSOCIATED REPEATED & PROLONGED
    OCCUPATION OVEREXPOSURE TO SOLVENTS W/PERMANENT BRAIN & NERVOUS
    SYSTEM DAMAGE.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH WITH PLENTY OF POTABLE WATER FOR AT LEAST 15
    MINUTES. THEN OBTAIN PROMPT MEDICAL ATTN. SKIN:REMOVE CONTAMINATED
    CLOTHING & WASH THOROUGHLY W/SOAP & WATER. INHALATION:REMOVE TO
    FRESH AIR. SUP PORT BREATHING (GIVE O*2/ARTIFICAL RESPIRATION))).
    INGESTION:DO NOT INDUCE VOMITING. CALL PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:103F/39.4C
Lower Limits:0.9
Upper Limits:7
Extinguishing Media:CARBON DIOXIDE,FOAM, WATER FOG, DRY CHEMICAL
Fire Fighting Procedures:USE NIOSH/MSHA AIR SUPPLIED BREATHING
    EQUIPMENT FOR ENCLOSED CONTAINERS W/WTR SPRAY, AVOID BREATHING
    VAPOR OR FUMES.
Unusual Fire/Explosion Hazard:IF LEAK OR SPILL HAS IGNITED, USE WATER
    SPRAY TO DISPERSE THE VAPORS FROM FIRE FIGHTERS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL IGNITION SOURCES. KEEP FROM HEAT,
    SPARKS & OPEN FLAME. ADD ABSORBENT (SAND, EARTH, SAWDUST) TO SPILL.
    VENTILATE AREA (OPEN WINDOMS & DOORS).IF LRGE SPILL-KEEP PROD FROM
    ENTERNG SEWER & WTRC OURSE BY DIKNG.ADVISE AUTH IF PROD HAS
    ENTERED.
Neutralizing Agent:N/K 

======================	Handling and Storage  ======================

Handling and Storage Precautions:PROPER SHIPPING NAME-PAINT.HAZARDOUS
    CLASSIFICATION - COMBUSTIBLE LIQUID I.D. NO. UN1263.
Other Precautions:INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING &
    INHALING THE CONTENTS MAY BE HARMFUL OR FATAL

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA HYDROCARBON VAPOR CANISTER OR
    SUPPLIED AIR RESPIRATORY IN CONFINED AREA
Ventilation:LOCAL EXHAUST:FACE VELOCITY 60FPM, MECHNICAL:USE EXPLOSION
    - PROOF EQUIPMNT, SPECIAL:USE ONLY W/ADEQUATE VENTILATION.
Protective Gloves:CHEMICAL RESISTANT GLOVES
Eye Protection:SPLASH GOGGLES & FACESHIELD
Other Protective Equipment:USE CHEMICAL RESISTANT APRON OR OTHER
    CLOTHING TO AVOID REPEATED SKIN CONTACT.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER USE & KEEP
    CONTAINER CLOSED WHEN NOT IN USE.
Supplemental Safety and Health
% VOLT:N/K .PH:N/K .

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:308F/153C
Melt/Freeze Pt:M.P/F.P Text:<0F/<-17.8C
Decomp Temp:Decomp Text:
Vapor Pres:<10 MMHG
Vapor Density:4.8(AIR=1)
Spec Gravity:1.09 (H*20=1)
Evaporation Rate & Reference:0.09 (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE LIQUID WITH KEROSENE ODOR
Corrosion Rate:

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
CAN REACT W/OXIDIZING MATERIALS WHEN HEATED TO DECOMPOSITION
Stability Condition to Avoid:HIGH TEMPERATURE
Hazardous Decomposition Products:CARBON MONOXIDE

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL,STATE, &
    FEDERAL REGULATIONS.DISPOSE OF ABSORBED MATERIAL AT AN APPROVED
    DISPOSAL SITE OR FACILITY.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***