===================== Product Identification =====================
MSDS NAME:MOLYDAG 254 RFU
NIIN:00-985-7255
MSDS Number: BGBVY
=== Responsible Party ===
Company:ACHESON COLLOIDS COMPANY
Address:1600 WASHINGTON AVE
Box:288
City:PORT HURON
State:MI
ZIP:48060-3456
Country:US
Emergency Phone Num:NONE
CAGE:70079
=== Contractor Identification ===
Company:ACHESON COLLOIDS CO DIV OF ACHESON INDUSTRIES INC
Address:1600 WASHINGTON AVE
Box:611747
City:PORT HURON
State:MI
ZIP:48061-1747
Country:US
Phone:800-255-3924
CAGE:70079
============= Composition/Information on Ingredients =============
Name:TOLUENE (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 40%
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 36%
OSHA PEL:200 PPM/300 STEL
ACGIH TLV:200 PPM/300STEL 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:PIGMENT
Fraction by Wt: 7.0%
ACGIH TLV:15 MPPCF
Name:2-ETHOXYETHYL ACETATE (CELLOSOLVE ACETATE) (EGEEA)
CAS:111-15-9
RTECS #:KK8225000
Fraction by Wt: 4.0%
OSHA PEL:S,100 PPM
ACGIH TLV:S, 5 PPM; 9192
Name:ANTIMONY TRIOXIDE (SARA III)
CAS:1309-64-4
RTECS #:CC5650000
Fraction by Wt: 4.2%
OSHA PEL:0.5 MG/M3 (SB)
ACGIH TLV:0.5 MG SB/M3; 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
===================== Hazards Identification =====================
Effects of Overexposure:EYE & SKIN-IRRITANT. INHAL-POSS
SEVERE/PERMANENT EFFECTS. INGEST-GASTRO
IRRIT,NAUSEA,VOMIT,DIARRHEA.
======================= First Aid Measures =======================
First Aid:FLUSH EYES W/WATER,GET IMMED MED ATTN. SKIN-WASH W/SOAP &
WATER,REMOVE CONTAM CLOTHES. INGEST-GET IMMED MED ATTN. INHAL-GET
TO FRESH AIR,GET IMMED MED ATTN.
===================== Fire Fighting Measures =====================
Flash Point:24F/-4.5C/TCC
Extinguishing Media:FOAM,CARBON DIOXIDE,DRY CHEMICAL
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING SUPPLY
Unusual Fire/Explosion Hazard:DO NOT STORE IN ALUMINUM OR ZINC
CONTAINERS
================== Accidental Release Measures ==================
Spill Release Procedures:APPLY ABSORBENT MATERIAL & TRANSFER TO
CONTAINERS.
====================== Handling and Storage ======================
Handling and Storage Precautions:DO NOT INHAL MISTS OR VAPORS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:IF TLV EXCEEDED,USE AIR SUPPLIED BREATHING EQUIP
Ventilation:SUFFICIENT TO MAINTAIN EXPOS LEVEL BELOW TLV
Protective Gloves:SOLVENT RESIST
Eye Protection:NONE
Other Protective Equipment:NONE
Supplemental Safety and Health
INGREDIENT #6: DIBASIC LEAD PHOSPHITE-2%;TLV=0.05 MG/CUM; MSDS
DATE:5/9/86
================== Physical/Chemical Properties ==================
HCC:F2
Spec Gravity:0.96
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GREY FLUID,SHARP ODOR
Percent Volatiles by Volume:80
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS
Hazardous Decomposition Products:CARBON MONOXIDE & DIOXIDE
==================== Disposal Considerations ====================
Waste Disposal Methods:CONSULT W/FED,STATE & LOCAL WASTE REGS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|